This release is a pre-release and may not be stable for production use.
What is OpenSCvx
OpenSCvx is a general python-based successive convexification implementation which uses a JAX backend. It is designed to be easy to use for anyone and fast enough for everyone, all while being open and modular for contributors.
OpenSCvx provides a clean symbolic interface for problem definition which should be intuitive to users of NumPy, JAX, and CVXPY. This allows us to hide a lot of the under-the-hood magic away from the user while also providing a modular architecture, enabling contributors to focus on the algorithms without worrying about interface design.
OpenSCvx makes heavy use of JAX to efficiently perform calculations in the successive convex programming loop through automatic differentiation, ahead-of-time (AOT) compilation, vectorization, and GPU acceleration. Behind this is a CVXPY-based backend to solve the convex subproblems.
This is an open project and is under active development. Try it out, give us feedback, and help contribute.
import openscvx as ox
g = 9.81
# Define states
position = ox.State("position", shape=(2,))
position.min = [0.0, 0.0]
position.max = [10.0, 10.0]
position.initial = [0.0, 10.0]
position.final = [10.0, 5.0]
velocity = ox.State("velocity", shape=(1,))
velocity.min = [0.0]
velocity.max = [10.0]
velocity.initial = [0.0]
velocity.final = [ox.Free(10.0)]
# Define control (angle from vertical)
theta = ox.Control("theta", shape=(1,))
theta.min = [0.0]
theta.max = [1.755]
theta.guess = [[0.09], [1.755]]
# Define dynamics
dynamics = {
"position": ox.Concat(
velocity * ox.Sin(theta),
-velocity * ox.Cos(theta),
),
"velocity": g * ox.Cos(theta),
}
constraints = []
for state in [position, velocity]:
constraints.append(ox.ctcs(state <= state.max))
constraints.append(ox.ctcs(state.min <= state))
# Build and solve
problem = ox.Problem(
dynamics=dynamics,
constraints=constraints,
states=[position, velocity],
controls=[theta],
time=ox.Time(initial=0.0, final=ox.Minimize(2.0), min=0.0, max=2.0),
N=2,
)
problem.initialize()
results = problem.solve()
results = problem.post_process()
Installation
OpenSCvx is available on PyPI and can be trivially installed with pip.
It is recommended to install OpenSCvx inside a virtual environment (venv, conda, uv, etc.). If you don't already have one set up:
python3 -m venv .venv
source .venv/bin/activate
Using pip
pip install openscvx
Using uv
If you have uv installed you can prefix the commands with uv for faster installation:
uv pip install openscvx
[!TIP] Optional Dependencies
For GUI support or CVXPYGen code generation:
pip install openscvx[gui,cvxpygen]
[!TIP] Nightly Builds
To install the latest development version (nightly), use the
--preflag:pip install --pre openscvx
Installing From Source
Using pip
git clone https://github.com/OpenSCvx/OpenSCvx.git
cd OpenSCvx
python3 -m venv .venv
source .venv/bin/activate
pip install -e .
Using uv
git clone https://github.com/OpenSCvx/OpenSCvx.git
cd OpenSCvx
uv venv
source .venv/bin/activate
uv pip install -e .
Getting Started
Check out the OpenSCvx documentation to help you get started
Running the Examples
We also have a selection of problems in the examples/ folder as well as on the Examples page of the documentation. The example trajectory optimization problems are grouped by application and represent some of the problem types that can be solved by OpenSCvx.
[!Note] To run the examples, you'll need to clone this repository and install OpenSCvx in editable mode (
pip install -e .). See the Installing From Source section above for detailed installation instructions.
To run a problem simply run any of the examples directly, for example:
python3 examples/abstract/brachistochrone.py
and adjust the plotting as needed.
Check out the problem definitions inside examples/ to see how to define your own problems.
Code Structure
What is implemented
This repo has the following features:
- Free Final Time
- Fully adaptive time dilation (
sis appended to the control vector) - Continuous-Time Constraint Satisfaction
- FOH and ZOH exact discretization (
tis a state so you can bring your own scheme) - Vectorized and Ahead-of-Time (AOT) Compiled Multishooting Discretization
- JAX Autodiff for Jacobians
Acknowledgements
This work was supported by a NASA Space Technology Graduate Research Opportunity and the Office of Naval Research under grant N00014-17-1-2433. The authors would like to acknowledge Natalia Pavlasek, Fabio Spada, Samuel Buckner, Abhi Kamath, Govind Chari, and Purnanand Elango as well as the other Autonomous Controls Laboratory members, for their many helpful discussions and support throughout this work.
Citation
Please cite the following works if you use the repository,
@ARTICLE{hayner2025los,
author={Hayner, Christopher R. and Carson III, John M. and Açıkmeşe, Behçet and Leung, Karen},
journal={IEEE Robotics and Automation Letters},
title={Continuous-Time Line-of-Sight Constrained Trajectory Planning for 6-Degree of Freedom Systems},
year={2025},
volume={},
number={},
pages={1-8},
keywords={Robot sensing systems;Vectors;Vehicle dynamics;Line-of-sight propagation;Trajectory planning;Trajectory optimization;Quadrotors;Nonlinear dynamical systems;Heuristic algorithms;Convergence;Constrained Motion Planning;Optimization and Optimal Control;Aerial Systems: Perception and Autonomy},
doi={10.1109/LRA.2025.3545299}}
@misc{elango2024ctscvx,
title={Successive Convexification for Trajectory Optimization with Continuous-Time Constraint Satisfaction},
author={Purnanand Elango and Dayou Luo and Abhinav G. Kamath and Samet Uzun and Taewan Kim and Behçet Açıkmeşe},
year={2024},
eprint={2404.16826},
archivePrefix={arXiv},
primaryClass={math.OC},
url={https://arxiv.org/abs/2404.16826},
}
@misc{chari2025qoco,
title = {QOCO: A Quadratic Objective Conic Optimizer with Custom Solver Generation},
author = {Chari, Govind M and A{\c{c}}{\i}kme{\c{s}}e, Beh{\c{c}}et},
year = {2025},
eprint = {2503.12658},
archiveprefix = {arXiv},
primaryclass = {math.OC},
}
1 maintainer
Metadata
1 maintainer
Release files for openscvx 0.4.1.dev149
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | |
|---|---|---|---|
| openscvx-0.4.1.dev149.tar.gz | 33.1 MB | Details |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Reset |
|---|---|---|---|---|
| openscvx-0.4.1.dev149-py3-none-any.whl | Python 3 | none | any | Details |
Total release size: 33.4 MB
Release files / openscvx-0.4.1.dev149.tar.gz
| Download URL | openscvx-0.4.1.dev149.tar.gz |
|---|---|
| Size | 33.1 MB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
10009b53a8b74785fe039edbbe6857ed61e1a1e119d14deeb95b2fcd77c97ab2
|
|
BLAKE2b-256 checksum How to use checksums |
3124f4dca9397f383419be945020d3ed109d466514c56b336218e779d74e7235
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
uv/0.10.9 {"installer":{"name":"uv","version":"0.10.9","subcommand":["publish"]},"python":null,"implementation":{"name":null,"version":null},"distro":{"name":"Ubuntu","version":"24.04","id":"noble","libc":null},"system":{"name":null,"release":null},"cpu":null,"openssl_version":null,"setuptools_version":null,"rustc_version":null,"ci":true}
|
Release files / openscvx-0.4.1.dev149-py3-none-any.whl
| Download URL | openscvx-0.4.1.dev149-py3-none-any.whl |
|---|---|
| Size | 351.7 kB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
5ae4de6f890b11fd593dbd94524e623076ea1e8c6e3c5d40ad03140e030d54e4
|
|
BLAKE2b-256 checksum How to use checksums |
e33f6e983570817aaa4332b48deee80797d847f40afe579ae768f71df49c1dcf
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
uv/0.10.9 {"installer":{"name":"uv","version":"0.10.9","subcommand":["publish"]},"python":null,"implementation":{"name":null,"version":null},"distro":{"name":"Ubuntu","version":"24.04","id":"noble","libc":null},"system":{"name":null,"release":null},"cpu":null,"openssl_version":null,"setuptools_version":null,"rustc_version":null,"ci":true}
|
