ou-runner 0.1.0

A Typer CLI that walks Odoo databases through OpenUpgrade version chains in Docker.

🚀 ou-runner

One command. Many Odoo majors. Zero hand-holding.

If you've ever used OCA/OpenUpgrade in a Dockerized setup, you already know the drill: switching branches for every target major, rebuilding per-version images, hand-rolling pg_dump and pg_restore between hops, and keeping a side note of how long each one took.

ou-runner takes that loop off your hands. It walks an Odoo database from Odoo version X → Z one hop at a time, in Docker, with every dump named, every hop timed, and every artifact in the folder you ran it from.

Disclaimer. Not affiliated with Odoo S.A. or the OCA OpenUpgrade project. ou-runner wraps OCA/OpenUpgrade for convenience; the migration scripts themselves belong to OCA.

Scope. ou-runner was built and tested against an Odoo 14 → 19 migration. Earlier majors (≤13) are out of scope — they may work, but nothing about the version table, Dockerfile rendering, or upgrade-path wiring has been exercised against them.

---

✨ Features

• 🐳 Docker-managed Odoo 14 → 19 — one compose file, one network, six profiles
• 🔄 Auto-clones OpenUpgrade branches — no manual git checkout
• 💾 Automated pg_dump between hops — each hop's output is the next hop's input
• ⏱️ Built-in migration timing — migration_times.json records every run
• 🍺 --hold-my-drink — chain every hop from your starting version to the target
• 🧹 clean sweeps everything — no global state, nothing in your home folder

---

Without vs. with ou-runner

flowchart LR
  subgraph WITHOUT["😩 Without ou-runner"]
    direction TB
    W1[Clone OpenUpgrade 15] --> W2[Write Dockerfile 15]
    W2 --> W3[docker run postgres + odoo 15]
    W3 --> W4[pg_restore v14 dump]
    W4 --> W5[odoo -u all --stop-after-init]
    W5 --> W6[pg_dump v15]
    W6 --> W7[Repeat for 16, 17, 18, 19...]
    W7 --> W8[Track times in a spreadsheet]
  end

  subgraph WITH["🚀 With ou-runner"]
    direction TB
    R1[ou-runner setup --from 14 --to 19]
    R1 --> R2[ou-runner run --from 14 --to 19 --hold-my-drink]
    R2 --> R3[ou-runner status]
  end

---

Install

With uv (recommended):

uv tool install ou-runner

Or run it on-demand without installing — uvx spins up an ephemeral environment, runs the command, and gets out of the way:

uvx ou-runner --help
uvx ou-runner setup --from 14 --to 19

Or with pip:

pip install ou-runner

---

Prerequisites

• Docker (Desktop or Engine) running locally.
• ~10 GB free disk — OpenUpgrade clones and intermediate dumps add up fast.
• A PostgreSQL custom-format dump of the Odoo 14 database you want to migrate (not a plain-text SQL file).
• Python 3.10+ available to uv (or pip) when installing.

---

Quick start

ou-runner writes all of its artifacts (dumps, backups, OpenUpgrade clones, generated Dockerfiles, docker-compose.yml, migration_times.json) into the current working directory. Pick a folder per migration:

mkdir my-odoo-migration && cd my-odoo-migration

# 1. Bootstrap the sandbox for the version range you need.
ou-runner setup --from 14 --to 19

# 2. Drop your v14 dump where ou-runner expects it.
cp /path/to/your_v14_backup.dump dumps/odoo_14_db.dump

# 3. Migrate one hop at a time, testing between each.
ou-runner run --from 14 --to 15
# open http://localhost:8015, log in, smoke-test
ou-runner run --from 15 --to 16
# …

# Or, if you trust the chain end-to-end:
ou-runner run --from 14 --to 19 --hold-my-drink

# At any point:
ou-runner status      # progress chain, dumps, backups, migration times

When you're done, ou-runner clean sweeps every artifact setup and run produced in the current directory. Docker containers and volumes are not touched — run docker compose down -v if you want those gone too.

Tip. Every ou-runner … example below works just as well as uvx ou-runner … if you'd rather not install the tool globally.

---

What happens during a hop

Every ou-runner run --from X --to Y runs these eight steps in order. Failures halt the hop and (outside --hold-my-drink) drop you into an interactive prompt so you can inspect, retry, or abort.

flowchart LR
  A[Ensure Postgres up] --> B[Stop running Odoo containers]
  B --> C[Restore source dump]
  C --> D[Backup before migration]
  D --> E[Start target version container]
  E --> F[odoo -u all --stop-after-init]
  F --> G[Restart container in normal mode]
  G --> H[pg_dump -Fc to dumps/odoo_to_db.dump]

---

Chaining hops with --hold-my-drink

OpenUpgrade only supports sequential hops, so going from v14 to v19 means five upgrades. --hold-my-drink strings every intermediate hop together — each hop's dump becomes the next hop's input — and bypasses interactive prompts so a failure halts the chain cleanly.

flowchart LR
  D14[(dumps/odoo_14_db.dump)] --> H1[hop 14→15]
  H1 --> D15[(dumps/odoo_15_db.dump)] --> H2[hop 15→16]
  H2 --> D16[(dumps/odoo_16_db.dump)] --> H3[hop 16→17]
  H3 --> D17[(dumps/odoo_17_db.dump)] --> H4[hop 17→18]
  H4 --> D18[(dumps/odoo_18_db.dump)] --> H5[hop 18→19]
  H5 --> D19[(dumps/odoo_19_db.dump)]

---

Commands

Command	What it does
setup --from <v> --to <v>	Bootstrap the sandbox: clone OpenUpgrade branches, render Dockerfiles + docker-compose.yml.
update	git pull every openupgrade_<v>/ clone to the latest commits on its branch.
run --from <v> --to <v>	Run one migration hop. Add --hold-my-drink to chain all hops up to --to.
start <v>	Boot a fresh, empty Odoo instance of one version (useful when you want to create a starter dump).
status	Show the migration's state: progress chain, recorded times, dumps on disk, backups grouped by version.
logs <v> [-f]	Tail the matching Odoo container's logs.
clean [-y]	Sweep every artifact setup/run produced in the current directory.

Run ou-runner --help (or ou-runner <command> --help) for full flag listings.

---

Versions

Source	Target	Port	Output dump
14	15	8015	dumps/odoo_15_db.dump
15	16	8016	dumps/odoo_16_db.dump
16	17	8017	dumps/odoo_17_db.dump
17	18	8018	dumps/odoo_18_db.dump
18	19	8019	dumps/odoo_19_db.dump

---

How it works

ou-runner is a thin orchestrator — it never touches a database directly. Under the hood it:

• Clones the OCA/OpenUpgrade branches you need into openupgrade_<version>/ folders in your CWD.
• Renders per-version Dockerfile.openupgrade<N> files and a single docker-compose.yml that ties them together.
• Drives pg_dump, pg_restore, and odoo -u all --stop-after-init --upgrade-path=… through docker exec, container by container.
• Records every hop's wall-clock time in migration_times.json.

Everything lives in the directory you ran it from. No global state, nothing in your home folder.

---

License

MIT — see LICENSE.