p4net 1.0.0

A P4Runtime-native SDN simulation framework for BMv2.

p4net

A P4Runtime-native SDN simulation framework for BMv2.

Status: 1.0.0 — stable release. Public API committed per API Stability. Patch releases for fixes; minor releases for new functionality with deprecation cycles where needed.

Features

• P4Runtime-native control plane.
• BMv2 simple_switch_grpc data plane.
• Linux network-namespace based hosts.
• veth-based links with tc/netem impairment.
• Programmable Python topology DSL.
• Interactive CLI.
• Per-port packet capture.
• P4Runtime CPU-port packet I/O (<switch> packet send / listen).
• IPv4 and IPv6 host addressing with per-interface sysctl gating.
• Asymmetric link impairment (per-direction bandwidth, delay, jitter, loss_pct).
• Topology visualization (Graphviz DOT / PNG / SVG).
• No OpenFlow, no Open vSwitch, no Docker.

Requirements

• Linux kernel >= 5.4.
• Python 3.10+.
• BMv2 and p4c installed system-wide.
• Root or CAP_NET_ADMIN to manage namespaces and veth devices.

Installation

From a fresh checkout:

git clone https://github.com/zhh2001/p4net
cd p4net
python3 -m venv .venv
. .venv/bin/activate
pip install -e '.[dev]'

PyPI distribution may follow a future release.

Quick Start

from pathlib import Path
from p4net import Network
from p4net.topo import Topology

topo = Topology()
h1 = topo.add_host("h1", ip="10.0.0.1/24", mac="00:00:00:00:00:01")
h2 = topo.add_host("h2", ip="10.0.0.2/24", mac="00:00:00:00:00:02")
s1 = topo.add_switch("s1", p4_src=Path("quick_start.p4"))
topo.add_link(h1, s1, port_b=1)
topo.add_link(h2, s1, port_b=2)

with Network(topo) as net:
    print(net.pingall())

A complete runnable version, including the matching quick_start.p4 (a port-2-port swap that needs no runtime table programming) and a tiny static-ARP setup, lives in examples/quick_start/. Run it with:

sudo python examples/quick_start/quick_start.py

or, equivalently, with the p4net console script installed by pip install -e .:

sudo p4net examples/quick_start/quick_start.py

The console script loads any .py file that defines a module-level topology: Topology (and optionally setup(net)), brings up the network, and drops you into an interactive shell. If sudo strips your venv from PATH, run the binary explicitly: sudo env "PATH=$PATH" p4net ....

Examples

• examples/quick_start/ — minimal two-host network with a hardcoded port-swap pipeline.
• examples/l3_forwarding/ — runtime-programmed IPv4 LPM with static ARP.
• examples/cpu_punt/ — every dataplane packet punted to the controller; demonstrates <switch> packet send / <switch> packet listen.
• examples/dual_stack/ — two hosts carrying both IPv4 and IPv6.
• examples/asymmetric_link/ — per-direction delay shaping.
• examples/ipv6_lpm/ — runtime-programmed IPv6 LPM forwarding.

Documentation

Full documentation: https://zhh2001.github.io/p4net/

The English site is the authoritative reference; a Chinese translation layer is being added incrementally. Pages on the site cover installation, a tutorial, an architecture overview, the CLI reference, the auto-generated API reference, troubleshooting, a glossary, and per-example walk-throughs.

The source for these pages lives under docs/ and is built with MkDocs Material.

License

Apache-2.0.