peaq-os-cli

Python CLI for peaqOS. Describes install and the console entry point.

Install

python3 -m venv .peaq-os-cli
source .peaq-os-cli/bin/activate
pip install -e ".[dev]"

The declared SDK dependency is peaq_os_sdk[x402]>=0.11.1,<0.12; the CLI solana extra uses the same range. 0.11.1 is the first release that carries what this CLI's Solana onboarding needs: the terminal-first phases (registration, request, finalise, the mint against the bonded request, the link push), the link push over the Trust Validator node, the onboarding history's owner deltas that peaqos machine history shows, and the remint of a mint proven dead (0.11.0 reconciles such a mint forever). 0.10.0 still runs the removed reservation flow, so it cannot be used; no release below 0.10.0 ships the peaq_os_sdk.verify package that peaqos verify requires. CI/CD creates the release version. Optional Solana dependencies can be installed by changing the CLI extra above to .[dev,solana]; that extra alone does not supply the onboarding APIs or a Solana RPC endpoint.

Run Tests

pytest

The opt-in mainnet onboarding test is tests/integration/test_solana_onboarding_e2e.py; its module docstring provides the configuration example and wallet setup. Run it with PEAQOS_CLI_SVM_ONBOARDING_RUN=1 and PEAQOS_CLI_SVM_ONBOARDING_CONFIG=/absolute/path/run.json. Recovery/rejection cases are in tests/integration/test_solana_onboarding_recovery_e2e.py, with a separate prepared-state manifest and opt-in flags documented there. These tests can spend mainnet funds when enabled. The normal suite does not execute them. Preserve the run directory and original journal between phases; external operators provide mirror and link delivery.

For installed-package checks, build a wheel and sdist with python -m build, install the wheel and chosen SDK in fresh virtual environments, then run each environment's Python with -I tests/packaging/check_install.py --native-extra absent (or present after installing the SDK's Solana extra). The check reports installed versions, packaged IDL hashes, synchronous API availability and console-help results without RPC or wallet operations. A passing local development-wheel check does not establish a compatible published release or successful live onboarding.

Quality Gates

ruff check src tests
black --check src tests
python -m mypy src
pytest -q --cov=src/peaq_os_cli --cov-fail-under=90
flake8 src tests

The strict mypy gate covers src/, as specified by the CLI guardrails. Run tests with pytest; python -m mypy src tests additionally checks the entire test suite, which is not yet fully typed. Use the same virtual environment for dependency installation and quality gates so Click/SDK typing changes are checked consistently.

Running integration tests

Gate	Scope	Cost
PEAQOS_CLI_INTEGRATION=1	CLI suites, local mock faucet	No chain, no funds
PEAQOS_TOKENOMICS_INTEGRATION=1	Live agung activation and machine management	Activation spends real PEAQ irreversibly

The second matches the SDK's own gate name deliberately: enabling the CLI's integration tests must not also start spending.

Under that gate, the machine-management suite submits nothing by default. A write invoked without --yes against non-TTY stdin renders its full preview — real preflight, real chain reads, real SDK-supplied contract and method — and only then refuses for want of consent, so the read half of every write is covered for free. Three further opt-ins widen it:

Variable	Unlocks	Cost
PEAQOS_TKN2_MACHINE_ID	Anything machine-scoped	None
PEAQOS_TKN2_LIFECYCLE_WRITES=1	suspend → rerun → resume	Gas only, no bond
PEAQOS_TKN2_DESTINATION_RPC_URL + PEAQOS_TKN2_DESTINATION_DEPLOYMENT_ID	relocation status across deployments	None

Never aim the destination at peaq mainnet. These suites are testnet-only, and a cross-deployment read is still a read against whatever it targets.

Known limits, deliberately visible. Seven integration paths cannot run yet for want of fixtures neither this repository nor the SDK provides: existing-machine subscription activation, USDT subscription on either rail, controller-funded subscription, ERC-721 transfer, DID array replacement, a renewal reconciled after its allowance is consumed to zero, and a tier change at renewal (no recorded deployment carries CORE-784 yet). Each is a skipped test with its reason attached rather than an absent one, so pytest -m integration -rs lists them.

Agung's PriceOracle also has no committed PEAQ price, so every subscription quote reverts PriceNotAvailable() today. The suite asserts the CLI presents that as a stable error_code rather than a traceback, and starts skipping with "a price is now committed" once that changes.

Console usage

The peaqos script invokes the Click root group in peaq_os_cli.main.

peaqos --help
peaqos --version

Authoritative option text for any subcommand is always available via built-in help:

peaqos <command> -h
peaqos qualify event -h
peaqos qualify mcr -h
peaqos monetize provision run -h
peaqos stream grant -h
peaqos stream consume -h
peaqos stream distribute -h
peaqos stream pay -h
peaqos stream payproof -h

Commands

peaqos verify (experimental)

peaqos verify status MACHINE_ID reads independent KYB and chip states from the Verify API. MACHINE_ID must be an ASCII decimal integer in 1..2^256-1, without signs, whitespace or leading zeros. The API is authoritative; this command does not independently verify chain state or submit evidence.

The dedicated Verify configuration uses the root --verify-api-url option before PEAQOS_VERIFY_API_URL (including .env). It requires an HTTPS origin validated by the SDK; an empty explicit option is invalid. There is no default origin or fallback to another service. Help requires no Verify configuration or client.

peaqos verify
peaqos verify --help
peaqos --verify-api-url https://verify.example verify status 123
peaqos --verify-api-url https://verify.example verify status 123 --json

Human output shows the decimal machine DID, the home chain, effective DID controller, economic operator, separate KYB/chip states, and Source: Verify API. A Solana home reads Solana. An EVM home is named from its chain ID — peaq (EVM), Agung testnet (EVM), Base (EVM) — so the reader can always tell which chain the claim covers. An EVM chain the CLI has no name for reads EVM chain <id> rather than being labelled as some other network. The Solana genesis hash, and the numeric chain ID of a named EVM chain, appear only under --json. Each state is unverified, verified, expired or revoked. An existing unverified machine is successful data; an unknown machine is an error. No aggregate verification status is inferred.

--json emits one object with machineId (a decimal string), machineDid, homeChain, tagged didController and operator objects, and verification.kyb.status / verification.chip.status. Root --quiet preserves data output; --verbose adds no record or endpoint diagnostics. The command needs no wallet, private key, RPC, Tokenomics deployment or MCR configuration.

For EVM, homeChain contains kind: "evm" and a decimal chainId; for Solana it contains kind: "solana" and a full base58 genesisHash. Both identity objects contain the matching kind and full address. These values come from the API; no chain selector or lookup is added. This replaces the earlier experimental flat JSON shape.

Example JSON for a synthetic, existing EVM machine with neither component verified:

{
  "machineId": "123",
  "machineDid": "did:peaq:123",
  "homeChain": {
    "kind": "evm",
    "chainId": "3338"
  },
  "didController": {
    "kind": "evm",
    "address": "0x8617E340B3D01FA5F11F306F4090FD50E238070D"
  },
  "operator": {
    "kind": "evm",
    "address": "0x52908400098527886E0F7030069857D2E4169EE7"
  },
  "verification": {
    "kyb": {
      "status": "unverified"
    },
    "chip": {
      "status": "unverified"
    }
  }
}

The equivalent synthetic Solana projection keeps native identities separate:

{
  "machineId": "123",
  "machineDid": "did:peaq:123",
  "homeChain": {
    "kind": "solana",
    "genesisHash": "CktRuQ2mttgRGkXJtyksdKHjUdc2C4TgDzyB98oEzy8"
  },
  "didController": {
    "kind": "solana",
    "address": "4vJ9JU1bJJE96FWSJKvHsmmFADCg4gpZQff4P3bkLKi"
  },
  "operator": {
    "kind": "solana",
    "address": "8qbHbw2BbbTHBW1sbeqakYXVKRQM8Ne7pLK7m6CVfeR"
  },
  "verification": {
    "kyb": {
      "status": "unverified"
    },
    "chip": {
      "status": "unverified"
    }
  }
}

The read is public and unauthenticated. Each invocation makes one SDK read; it does not follow redirects, retry automatically, cache results or poll. Rate-limit errors may include a bounded delay for a later manual retry. Invalid responses produce an error rather than a verification state.

Exit codes are 0 for success, 1 for invalid machine-ID syntax/range, 2 for API/transport/protocol failures, and 3 for missing/invalid Verify configuration or incompatible SDK support. This resolves from PyPI on a clean install; MCR-approved cross-chain fixture validation is still pending.

peaqos verify status is the only Verify command that reaches the network, and it does so only through the SDK. It reads state; it never submits anything.

peaqos verify chip (experimental)

peaqos verify chip builds the local evidence an onboarding workflow needs before a machine's chip can be verified. Three stages run in order, each reading bounded files and writing one new artifact.

All options are file paths: no certificate, nonce, signature, evidence or key is ever passed as an argument value, so nothing sensitive reaches argv, the environment or shell history.

The challenge context. The onboarding service issues context.json. It is strict UTF-8 JSON of at most 4096 bytes with exactly these six string fields and no others:

{
  "chainId": "3338",
  "didController": "0x8617E340B3D01FA5F11F306F4090FD50E238070D",
  "expiresAt": "1789999999",
  "machineDid": "did:peaq:123",
  "machineId": "123",
  "nonce": "0x9e21fa871fae1ee7bbb829f178a675aa076a7e6241ce4653b208453377da3b2e"
}

chainId, machineId and expiresAt are canonical unsigned decimals with no sign, prefix, separator or leading zero. machineId is nonzero and machineDid must equal did:peaq: followed by exactly that decimal. nonce is 0x plus 64 lowercase hex characters. Protocol, profile, trust-bundle and fingerprint values are not accepted here — the SDK fixes or derives all of them.

Stage 1 — prepare. Validates the context, its freshness and the leaf certificate, then writes the digest the chip must sign.

peaqos verify chip prepare \
  --context context.json --certificate leaf.der --out prehash.bin

Chip preflight artifact created.

  Stage:        prepare
  Artifact:     chip-prehash
  Byte Length:  32
  Authority:    local preflight only

Stage 2 — controller-request. Rebuilds stage 1, verifies the chip signature, then writes the message the DID controller signs.

peaqos verify chip controller-request \
  --context context.json --certificate leaf.der \
  --chip-signature chip-signature.bin --out controller-message.bin

Chip preflight artifact created.

  Stage:        controller-request
  Artifact:     controller-message
  Byte Length:  279
  Authority:    local preflight only

Stage 3 — finalize. Rebuilds both earlier stages, verifies the controller signature, then writes the canonical evidence document and reports the fixed protocol identifiers.

peaqos verify chip finalize \
  --context context.json --certificate leaf.der \
  --chip-signature chip-signature.bin \
  --controller-signature controller-signature.bin --out evidence.json

Chip preflight artifact created.

  Stage:        finalize
  Artifact:     evidence
  Byte Length:  2411
  Authority:    local preflight only

  Protocol:           peaq.verify.chip-proof/1
  Profile:            infineon-optiga-trust-m-express-ca306/1
  Evidence Schema:    peaq.verify.chip-evidence/1
  Trust Bundle:       infineon-optiga-trust-m-express-ca306-roots/1
  Revocation Status:  not_evaluated

Byte lengths vary with the certificate and identity supplied; the values above come from the shared conformance corpus.

--json metadata. Every stage accepts --json, which replaces the rows with one object on stdout and nothing else. prepare and controller-request omit the five result fields rather than reporting empty ones:

{
  "artifact": "chip-prehash",
  "authority": "local_preflight_only",
  "byteLength": 32,
  "stage": "prepare"
}

{
  "artifact": "evidence",
  "authority": "local_preflight_only",
  "byteLength": 2411,
  "evidenceSchema": "peaq.verify.chip-evidence/1",
  "profile": "infineon-optiga-trust-m-express-ca306/1",
  "protocol": "peaq.verify.chip-proof/1",
  "revocationStatus": "not_evaluated",
  "stage": "finalize",
  "trustBundle": "infineon-optiga-trust-m-express-ca306-roots/1"
}

The metadata never contains artifact bytes, the output path, a DID, an address, the nonce or the expiry. Failures print one fixed line to stderr naming the flag and the constraint, for example:

Error: --out must be a path that does not exist yet and can be created as a new file.
Error: Chip controller-request failed because the supplied chip signature does not match this attempt.
Error: Chip prepare failed because the challenge is outside its freshness window. Request a new challenge and retry.

These commands do not talk to the chip, to a wallet or to any service. The CLI holds no key and signs nothing. Two signatures come from outside it, and the surrounding workflow owns both:

1. The onboarding service issues a challenge and gives you context.json (chainId, didController, expiresAt, machineDid, machineId, nonce) and the leaf certificate read from the chip's 0xE0E0 slot.
2. prepare writes a 32-byte prehash. Your platform adapter passes it to the chip's 0xE0F0 ECDSA-without-hashing operation. Do not hash it again — it is already the digest the chip signs.
3. controller-request verifies that chip signature and writes the controller's message. The machine's current DID controller signs it as an EIP-191 personal message exactly once, with no extra framing or prefix.
4. finalize revalidates both proofs and writes the canonical peaq.verify.chip-evidence/1 document. Submit that file through the onboarding service.

Success is not verification. The artifacts are local preflight evidence only. The backend independently revalidates the evidence and consumes the challenge before any machine reaches a verified state — read that state with peaqos verify status. Output says local preflight only and never reports a machine as verified, accepted, submitted or anchored. revocationStatus: not_evaluated records that revocation was not checked locally; it is not a claim that the certificate is unrevoked.

The challenge is short-lived and its freshness is rechecked on every stage against the SDK's own clock. There is no --now, grace period or bypass, and no state is carried between commands: each stage rebuilds every earlier one from the same files, so there is no cache, journal or resume.

Finalize prints the protocol, profile, evidence schema, trust bundle and revocation status. It prints no evidence hash and no chip ref: the SDK exposes no public read path for either value. The chip ref is carried as a field inside the written evidence document, and the evidence hash is keccak256 over the exact artifact bytes.

Artifacts are written to a new file that must not already exist, created with owner-only 0600 permissions and never overwritten, appended to or followed through a symlink. There is no --force. A stage that fails writes nothing and removes any file it had begun. Treat the artifacts as sensitive and delete them once the onboarding workflow is finished with them.

Exit codes match the rest of the Verify surface: 1 for invalid input, a rejected proof, an expired challenge or an artifact-write failure; 2 for an unexpected internal failure; 3 for an installed SDK without the preflight surface. Error messages name the flag and the constraint only — no path, identifier, certificate, signature or evidence content is ever printed or logged.

Chip preflight is EVM-only in v1. Solana-homed machines are readable through peaqos verify status, but the chip-preflight protocol does not extend to them.

peaqos init

Interactive wizard that writes a .env file in the current working directory.

peaqos init                    # interactive (network, key, URLs, contract addresses)
peaqos init --non-interactive  # use environment variables and network defaults
peaqos init --force            # overwrite existing .env without confirmation

The Event Registry prompt defaults to EVENT_REGISTRY_ADDRESS from the shell when set, otherwise to the Tokenomics 2.0 registry mapped to the deployment ID entered just before it, otherwise to the selected network's default. Press Enter to accept it or type a replacement. On mainnet the deployment ID defaults to peaq-mainnet, so the prompt offers the 2.0 EventRegistry 0xA1e7F1d7B24dAb55Dc92491e6d9B89F6E925Ad1e: 2.0 machines submit events there. Clearing the deployment ID is legacy mode and falls back to deployed_contracts.peaq.event_registry in the canonical contract configuration, which publishes the 1.0 address. Testnet maps to no 2.0 registry and still has no network default. An empty default requires an address and blank input re-prompts.

The Tokenomics 2.0 deployment ID is asked before the MCR API URL and the Event Registry because it selects both of their defaults. peaq-mainnet resolves to the production MCR at https://mcr.peaq.xyz; peaq-mainnet-michael is a staging deployment and resolves to https://mcr-staging.peaq.xyz, so it never inherits the production host. Exporting PEAQOS_MCR_API_URL or EVENT_REGISTRY_ADDRESS still overrides either default. The written .env keeps its previous layout.

In non-interactive mode the same precedence applies: EVENT_REGISTRY_ADDRESS, then the 2.0 registry for the resolved TOKENOMICS_DEPLOYMENT_ID, then the network default. If the resolved value is empty (including an explicitly empty shell variable), init exits with code 3, names EVENT_REGISTRY_ADDRESS, and does not create or overwrite .env, even with --force.

Example (interactive):

Network (mainnet, testnet) [mainnet]: mainnet
Private key source (paste, generate, wallet): generate
  Address:  0xAbCd...1234
  Key:      0xdeadbeef...
IMPORTANT: Save this private key securely. It will not be shown again.
RPC URL [https://peaq.api.onfinality.io/public]:
Tokenomics 2.0 deployment ID [peaq-mainnet]:
MCR API URL [https://mcr.peaq.xyz]:
Gas Station URL [https://depinstation.peaq.xyz]:
Event Registry address [0xA1e7F1d7B24dAb55Dc92491e6d9B89F6E925Ad1e]:
  Config: .env written to /home/operator/project/.env

  Running whoami to verify...
  Address :  0xAbCd...1234
  Network :  mainnet
  RPC URL :  https://peaq.api.onfinality.io/public
  Chain ID:  3338
  MCR API :  https://mcr.peaq.xyz

  Contracts:
    IdentityRegistry:  0x9075...0B6A
    IdentityStaking :  0x7d39...9B8E
    EventRegistry   :  0xA1e7...Ad1e
    MachineNFT      :  0xaF13...Bd61
    DID Registry    :  0x0000...0800
    Batch Precompile:  0x0000...0805

peaqos whoami

Show the active wallet address, network, chain ID, and all contract addresses.

When either Solana setting is configured, whoami also shows the requested cluster, a redacted RPC origin, and available SDK deployment/artifact metadata. Solana RPC credentials, paths, query strings and fragments are hidden. Packaged IDL integrity is checked through the SDK; missing metadata is labeled unavailable. These local checks do not verify the live cluster, deployed binaries or machine-read capability. The added diagnostics load no additional signer and make no Solana RPC calls; whoami retains its existing wallet identity and peaq chain-ID lookup.

peaqos whoami

Example:

  Address :  0xAbCd...1234
  Network :  mainnet
  RPC URL :  https://peaq.api.onfinality.io/public
  Chain ID:  3338
  MCR API :  https://mcr.peaq.xyz

  Contracts:
    IdentityRegistry:  0x9075...0B6A
    IdentityStaking :  0x7d39...9B8E
    EventRegistry   :  0xA1e7...Ad1e
    MachineNFT      :  0xaF13...Bd61
    DID Registry    :  0x0000...0800
    Batch Precompile:  0x0000...0805

peaqos wallet

Manage OWS (Open Wallet Standard) wallets in the local encrypted vault (~/.ows/). Requires the optional OWS dependency: pip install peaq-os-cli[ows].

peaqos wallet create <name> [--words 12|24] [--json]
peaqos wallet import <name> (--mnemonic | --private-key-file <path>) [--index <n>] [--json]
peaqos wallet list [--json]
peaqos wallet show <name-or-id> [--json]
peaqos wallet export <name-or-id>
peaqos wallet delete <name-or-id>
peaqos wallet use <name-or-id>

wallet create — Generate a new mnemonic-backed wallet. Displays addresses for all supported chains (peaq, Base, Ethereum, Solana, Bitcoin, Cosmos, etc.). The mnemonic is never shown; use wallet export to retrieve it.

peaqos wallet create my-machine
peaqos wallet create my-machine --words 24   # 24-word mnemonic
peaqos wallet create my-machine --json       # JSON output

wallet import — Import an existing wallet from a BIP-39 mnemonic (hidden prompt) or a private key file.

peaqos wallet import recovered --mnemonic
peaqos wallet import from-file --private-key-file ./operator.key

wallet list — List all wallets in the vault. Shows Name, ID, peaq Address, Key Type, and Created date.

peaqos wallet list
peaqos wallet list --json   # full WalletInfo array

wallet show — Display full wallet details with addresses for every supported chain family.

peaqos wallet show operator
peaqos wallet show operator --json

wallet export — Export the recovery phrase or private key (requires confirmation).

peaqos wallet export my-machine

wallet delete — Securely delete a wallet from the vault (requires confirmation).

peaqos wallet delete my-machine

wallet use — Set a wallet as the active default by writing PEAQOS_OWS_WALLET to .env. Subsequent commands use this wallet via load_client().

peaqos wallet use operator

Migration from raw keys:

peaqos wallet import my-operator --private-key-file ./operator.key
peaqos wallet use my-operator
peaqos whoami   # address matches the original key

peaqos activate

For a complete mainnet walkthrough, see Solana onboarding: installation, the two wallets and what to fund on Solana, the DID input, the seven stages on both rails as production printed them on 2026-10-06 (TICKET-ADD-SVM-023), the waits and resume commands, keyless status, recovery and test execution.

EVM activation onboards a machine in one atomic transaction. MachineStateAndSync.activateMachine mints the ERC-721, stores the DID document, activates the subscription and registers the home chain in a single call — replacing the old register → mint → DID-write sequence.

Solana onboarding (--chain solana) is terminal-first (CORE-801): the Solana owner pays the bond on Solana, in PEAQ (the OFT, 9 decimals) or USDC, and the run takes seven stages:

[1/7] Operator registration on peaq        registration   (reconciled, not sent, when already bound)
[2/7] Activation request on Solana         request
[3/7] Credit from peaq                     credit         (wait; the Trust Validator node)
[4/7] Settlement on Solana                 finalise       (the point of no return)
[5/7] Bond on peaq                         bond           (wait; node → peaq → node)
[6/7] Native onboarding on Solana          native_onboarding
[7/7] Link push Solana → peaq              linkage        (wait for peaq's watermark)

Without --phase, a write runs every stage the onboarding still needs in one process (--operator-wallet, --owner-wallet, --max-in, --yes --wait-minutes 60; about ten minutes on production), resumes by rerunning the same command at the stage the request's state names, and ends with phases and, once complete, spent: the escrow out and back, the rents out and back, the registration's gas, all read from receipts. --dry-run reads the plan, the registration, the activation quote (with the suggested --max-in to copy) and, on USDC, the finalise lookup table, keylessly. Every write result names its resume_command, its own transaction as reference and every transaction the run touched as references, the RPC hosts it used as endpoints, and an audit_trail (the registration, the terminal request, the transactions, and the link push's LayerZero message with its nonce and GUID or, on a Trust Validator route, its relay with the outbox nonce). --dry-run --audit prints the same trail keylessly, from peaqos.log and the original inputs. See Solana onboarding for the waits, the audit trail, exit codes and the journal_claim / chain_verified evidence labels.

Solana option	Meaning
--phase	registration, request, finalise, native_onboarding, linkage and cancel_request each run one stage subject to SDK checks. Omitted on a write, the command runs every phase the onboarding still needs in one process (the default run; see Solana onboarding). The waits (credit, bond) resume through the default run. Preview accepts any phase, or omission for the full plan; --phase linkage --dry-run also quotes the link push, --phase finalise --dry-run the settlement.
--operator-wallet / --owner-wallet	OWS wallets of the peaq operator, which signs only registration on peaq (gas only, about 0.01 PEAQ, once per wallet), and of the Solana owner, which signs request, finalise, native_onboarding, linkage and cancel_request and pays the bond. Each defaults to PEAQOS_OWS_WALLET and is unlocked once per run.
--pay-in	PEAQ (default) or USDC: the token the owner pays the bond in on Solana.
--max-in	Required to open a request (the default run and --phase request): the escrow cap in base units of the --pay-in token. On PEAQ it must cover the bond (ESCROW_BELOW_BOND otherwise, with both figures); anything above the bond comes back at settlement. --dry-run prints the quote's suggestion.
--slippage-bps	0..10000, default 100, both rails: on USDC the cushion on the swap's simulated cost, on PEAQ on the price stamp moving between the quote and the landing.
--tier	entry, basic, pro, or a program tier number 0–7 (basic is program tier 1); the quote refuses an unpriced one.
--nonce	--phase cancel_request only: the request to cancel; default the machine's latest.
--solana-owner	Required owner's base58 public key: it pays the bond and signs every Solana write.
--solana-controller	Optional native controller; omission uses the SDK's owner-only default.
--evm-operator	Optional peaq assertion: must equal the operator wallet's peaq address, which registration binds and the mint inherits. Refused before [1/7] with EVM_OPERATOR_MISMATCH and both addresses.
--max-native-fee-lamports	Required network/priority fee ceiling of each Solana write, excluding rent.
--max-native-rent-lamports	Required rent ceiling of each Solana write: the request (three accounts on a machine's first request), the mint (two), the link push (one).
--max-link-push-fee-lamports	--phase linkage and the default run: ceiling on the LayerZero messaging fee for the link push, needed only when the deployment routes the push over LayerZero (about 962,352 lamports at the 2026-09-24 quote, with the push's lzReceive gas at 1.5M; read it from --dry-run --phase linkage, which also names the route). The Trust Validator route (CORE-781) has no fee and ignores it. Refused with any other phase.
--compute-unit-limit	Optional: the mint's compute budget (default 600,000). The terminal writes and the link push use the SDK's per-instruction limits.
--compute-unit-price-micro-lamports	Optional priority price per compute unit for every Solana write (default 10000: 9,700 lamports in priority fees across a PEAQ-rail onboarding, 12,700 on USDC, so the largest write, the mint, pays 11,000 with its base fee and fits a --max-native-fee-lamports of 50,000). 0 sends without priority, which Solana's public endpoint can drop under load; a dropped write is reconciled from the journal, never resent.
--payment, --max-net-peaq-amount, --max-usdt-amount	The removed reservation flow's options: refused on --chain solana with OPTION_NOT_FOR_CHAIN (exit 1), naming --pay-in / --max-in. --payment keeps its default for --chain peaq; only a command-line value is refused.
--from-block	No longer read: since SDK 0.11 nothing scans a peaq log window. Accepted, with a note, so existing commands keep parsing.
--timeout-seconds	Optional time budget for each attempt of a write: recovery reads, the SDK's checks, the send and the receipt wait (default 300). On a slow public RPC the budget can run out before signing (CANCELLED_BEFORE_SUBMIT) or before the receipt is seen (PENDING with the reference retained); raise it, or add --wait-minutes, rather than resubmitting. Never a spending limit.
--wait-minutes	Optional, 0 to 60 (default 0): one budget for the run's three waits (the node's credit, at most 3 min; the bond, at most 6 min; the delivery of the link push, by the Trust Validator node or LayerZero) and every receipt reconcile (progress event receipt_reconciled), which never resends. Reads only. A leg still unresolved when the budget runs out exits 2 (PENDING); Ctrl-C exits 1 (CANCELLED). Refused with --dry-run.
--audit	--dry-run only: also read the onboarding's audit_trail keylessly, from peaqos.log in the working directory and the original inputs (the SDK needs both). Run it where the onboarding ran. Without a journal it prints a note; a failed read goes to audit_errors and the preview still prints. Nothing is signed or sent.

All ceilings are explicit; zero is a strict value, not unlimited. For Solana, --for and --machine-key are rejected. Reuse the identity/DID flags with base58 manufacturer and verification-method controllers. Configure the paired Tokenomics deployment and Solana RPC using the shared configuration flags/environment. For example, with public identity and caller-selected budget variables already set:

peaqos activate --chain solana --dry-run --json \
  --solana-owner "$OWNER" \
  --machine-type Sensor --credential-subject-hex 0x00ff --manufacturer "$MANUFACTURER" \
  --tier basic --did-document ./native-did.json --pay-in PEAQ \
  --max-native-fee-lamports "$FEE_CAP" --max-native-rent-lamports "$RENT_CAP"

Then run it, copying the dry run's suggested --max-in:

peaqos activate --chain solana <the same inputs> --max-in "$MAX_IN" \
  --operator-wallet fleet-operator --owner-wallet fleet-owner \
  ${LINK_FEE_CAP:+--max-link-push-fee-lamports "$LINK_FEE_CAP"} --yes --wait-minutes 30

Leave LINK_FEE_CAP unset on production, where the Trust Validator node delivers the push with no messaging fee (both mainnet sets; peaq-mainnet since 2026-10-06); set it only on a deployment that routes the push over LayerZero. The dry run's link_push.transport says which.

Previews do not prove completed transactions. Before the mint JSON reports did: null. Consent covers only the stage it is shown for and the displayed caps; the SDK re-reads and re-checks before it signs. The settlement's terms open with "This cannot be cancelled afterwards." Interactive calls prompt on stderr, including --json; non-interactive calls require --yes. JSON stdout contains one result or error object.

Keep peaqos.log in the working directory and provide the same original inputs on every rerun. The journal holds every signed row before broadcast (the registration, the terminal request, the settlement or cancel, the mint, the link push), and every rerun passes them back to the SDK, which reconciles a recorded write instead of sending it again. A stage the chain already shows done is reported keyless: no wallet is unlocked. Missing, failed or delayed receipts never authorize automatic replacement. A persistence failure retains the reference in output: restore the journal before further action.

The result distinguishes new attempts, recorded attempts and independently satisfied state. Exit 0 means the selected stage succeeded with no reported errors, not that onboarding is complete; onboarding is complete when the SDK's aggregate stage is complete, after peaq applies the link push. Pending, refused or failed outcomes exit 2, input or consent errors 1, and typed configuration errors 3. A settled bond is not rolled back by stopping later stages. For ID-only current observations, use machine status MACHINE_ID with the Solana settings below.

The bond is always quoted in PEAQ. --payment chooses what settles it.

The transaction sender becomes the machine's owner and bond payer. There is no recipient parameter, and no operator-sponsored variant.

Two modes:

• Self-owned — no --for. Your configured signer owns the machine, pays the bond, and is its DID controller.
• Machine-owned / operator-controlled — --for <machine-address> --machine-key <path> together. The machine signs, owns the NFT, and pays gas and the bond; your operator address is recorded as DID controller. Both flags are required together; supplying one alone exits 1.

Before any spend the CLI shows the bond, the voucher credit applied, and the net PEAQ, then asks. In machine-key mode it also states the changed rights:

Who	Can	Cannot
Machine wallet (owner)	Transfer the NFT; rotate or clear the controller	—
Operator (controller)	Lifecycle, subscription, relocation and DID actions	Transfer the NFT; rotate or clear the controller

# Self-owned
peaqos activate \
  --machine-type Sensor \
  --credential-subject-hex 0xdeadbeef \
  --manufacturer 0x3333333333333333333333333333333333333333 \
  --tier entry \
  --did-document ./did.json

# Machine-owned, operator-controlled
peaqos activate ... --for 0xMachine --machine-key ./machine.key

# Preview the cost without submitting anything
peaqos activate ... --dry-run

# Scripted: --yes is the only non-interactive consent
peaqos activate ... --json --yes

# Settle the PEAQ bond in USDT, accepting 0.5% conversion movement
peaqos activate ... --payment usdt --slippage-bps 50

Flags:

Flag	Purpose
--machine-type	Identity domain. Half of what fixes the permanent machine ID.
--credential-subject-hex	0x-prefixed identity-anchor bytes. The other half.
--manufacturer	Manufacturer address. Recorded on-chain, never verified by the contract.
--tier	entry | basic | pro.
--did-document	Path to a UTF-8 JSON DID document (schema below).
--for	Machine EOA address. Switches to machine-owned mode; requires --machine-key.
--machine-key	File holding the machine's 0x-prefixed hex private key.
--payment	peaq (default) | usdt. Which asset settles the PEAQ-quoted bond.
--slippage-bps	Accepted conversion movement, 0..10000. Required for usdt, rejected for peaq.
--skip-funding	Skip balance check, 2FA and gas-station funding.
--dry-run	Preview and stop. Submits nothing.
--json	One JSON object on stdout. Never implies consent.
--yes / -y	Accept the displayed terms. The only non-interactive consent.

--machine-type and --credential-subject-hex alone determine the machine ID (uint256(keccak256(abi.encode(machineType, credentialSubject)))). Neither can be changed after activation, and the same pair can never be onboarded twice.

Paying in USDT. The bond, the voucher credit and the net amount stay in PEAQ; only settlement differs. The CLI shows the USDT token, the quote, the accepted slippage and the resulting maximum USDT, then submits that exact maximum — it never widens a bound you approved. The allowance goes to SubscriptionTokenProvisionPool, which performs the conversion, rather than to MachineSubscription.

On this rail no PEAQ leaves your wallet, so the funding check accounts for gas alone. A bond covered entirely by voucher credit converts nothing, transfers nothing, emits no PaidWithUsdt, and reports 0 paid — which is what happened, not a missing value.

Private keys must come from a file. Inline key flags are intentionally unsupported — a file keeps the key out of shell history and ps output.

Removed flags. --doc-url, --data-api and --visibility wrote DID attributes after registration. Tokenomics 2.0 records the DID document atomically during activation, so there is no post-registration write to target. Passing any of them exits 1 with migration guidance; move documentation and API URLs into the serviceEndpoints array of --did-document.

DID document schema. Exactly three root fields, all required. Unknown fields, duplicate JSON keys, and a root id or controller are rejected — id is computed on-chain, and controller is set by the CLI from the mode.

{
  "verificationMethods": [
    {
      "id": "#key-1",
      "methodType": "Ed25519VerificationKey2020",
      "controller": "0x1111111111111111111111111111111111111111",
      "publicKeyMultibase": "z6MkiExamplePublicKey"
    }
  ],
  "authentication": [0],
  "serviceEndpoints": [
    {
      "id": "#telemetry",
      "serviceType": "TelemetryService",
      "serviceEndpoint": "https://machine.example/telemetry"
    }
  ]
}

Each authentication entry is an index into verificationMethods. The CLI bounds-checks them because nothing on-chain does: MachineRegistry stores them unchecked at mint, so an out-of-range index would be recorded permanently.

Environment:

Variable	Purpose
PEAQOS_PRIVATE_KEY	Operator key. In machine-key mode this signs nothing; it supplies the controller address.
PEAQOS_RPC_URL	RPC endpoint. Must match the deployment's chain.
PEAQOS_NETWORK	mainnet or testnet.
PEAQOS_GAS_STATION_URL	Gas-station base URL for the funding steps.
TOKENOMICS_DEPLOYMENT_ID	Deployment record, e.g. agung-2026-08-28.

No Tokenomics contract addresses are configured. TOKENOMICS_DEPLOYMENT_ID selects a record from the SDK's approved snapshot; the five addresses travel with it and are verified against InfoDesk.peer(role) on-chain before any write. peaqos whoami shows which ones resolved.

The six legacy *_ADDRESS variables are still required, because the SDK client still takes them. They are unused by activation.

Exit codes and error_code. Four exit codes, per the CLI-wide convention. The specific condition rides on error_code, which is stable, appears in --json, and is bracketed in human output.

Exit	Meaning	error_code
0	Activated, already active, or a confirmed management write	ACTIVATED, ALREADY_ACTIVE, CONFIRMED, ALREADY_CONFIRMED
1	Bad input, declined, or non-interactive without --yes	INVALID_INPUT, DEPRECATED_FLAG, MACHINE_KEY_MISMATCH, DECLINED, NOT_INTERACTIVE, MACHINE_ID_MISMATCH, CANCELLED_BEFORE_SUBMIT, SPONSORED_UNSUPPORTED, INVALID_TIER, LEGACY_REGISTRATION_UNSUPPORTED, RELOCATION_UNAVAILABLE, AUTHENTICATION_REWRITE_REQUIRED, SOLANA_OPERATION_UNSUPPORTED, ONBOARDING_FLOW_UNSUPPORTED, DRY_RUN_UNSUPPORTED, SUBSCRIPTION_NOT_ELIGIBLE, ZERO_ESCROW_AMOUNT, ESCROW_BELOW_BOND, NOT_ACTIVATION_PAYER, UNSUPPORTED_TOKEN_PROGRAM, FROM_BLOCK_AHEAD_OF_FINALIZED, CANCELLED, OPTION_NOT_FOR_CHAIN, EVM_OPERATOR_MISMATCH
2	RPC / on-chain failure, or a submitted transaction still pending	ORACLE_UNPRICED, NOT_FULL_MODE, INSUFFICIENT_PEAQ, QUOTE_MOVED, APPROVAL_FAILED, ALLOWANCE_INSUFFICIENT, ALREADY_ACTIVATED_RACE, TX_REVERTED, EVENT_MISMATCH, STATE_MISMATCH, STATE_CONFLICT, MACHINE_NOT_FOUND, MACHINE_HOMED_ELSEWHERE, RPC_FAILED, RPC_RATE_LIMITED, PENDING, ALREADY_ACTIVATED, ALREADY_TERMINATED, NOT_ACTIVATED, NOT_ACTIVE, NOT_SUSPENDED, TECHNICALLY_PAUSED, MACHINE_RELOCATING, NOT_MACHINE_OWNER, NOT_OWNER_OR_CONTROLLER, ERC721_INCORRECT_OWNER, ERC721_INSUFFICIENT_APPROVAL, ERC721_INVALID_APPROVER, ERC721_INVALID_OPERATOR, PROVISION_POOL_NOT_CONFIGURED, SLIPPAGE_EXCEEDED, MAX_USDT_EXCEEDED, INSUFFICIENT_RESERVE, INSUFFICIENT_USDT_RECEIVED, TIER_CHANGE_WHILE_ACTIVE, MACHINE_NOT_ONBOARDED, EVM_OPERATOR_UNSET, LINK_CONFIG_UNAVAILABLE, BRIDGING_DISABLED, TV_OUTBOX_MISSING, TV_INBOUND_REFUSED, LZ_SEND_LIBRARY_UNSUPPORTED, FEE_LIMIT_EXCEEDED, RENT_LIMIT_EXCEEDED, INSUFFICIENT_SOL, LINK_PUSH_TOO_LARGE, NONCE_IN_USE, TERMINAL_PAUSED, OPERATOR_NOT_REGISTERED, HOME_CHAIN_MISMATCH, NONCE_NOT_MONOTONIC, NONCE_JUMP_TOO_LARGE, REQUEST_ALREADY_OPEN, MACHINE_ALREADY_ACTIVE, ROUTE_NOT_WHITELISTED, PRICE_TIMESTAMP_IN_FUTURE, PRICE_TOO_OLD, TIER_NOT_PRICED, BOND_UNSIZEABLE, BOND_TOO_LARGE, ESCROW_BALANCE_MISMATCH, MACHINE_ID_TAKEN_ON_PEAQ, OPERATOR_BOUND_ELSEWHERE, REQUEST_EXPIRED, COMMIT_EXPIRED, REQUEST_NOT_COMMITTED, REQUEST_NOT_CANCELLABLE, REQUEST_NOT_YET_EXPIRED, ACTIVATION_REFUNDED, FINALISE_PATH_MISMATCH, SWAP_ROUTE_MISCONFIGURED, TICK_ACCOUNTS_INVALID, ACTIVATION_NOT_BONDED, ACTIVATION_REQUEST_MISMATCH, INSUFFICIENT_BALANCE, WAIT_READ_FAILED
3	Missing or invalid configuration	ADDRESSES_UNSET, DEPLOYMENT_UNKNOWN, TOKENOMICS_NOT_CONFIGURED, ADDRESS_OVERRIDE_MISMATCH, CHAIN_MISMATCH, CONTRACT_NOT_DEPLOYED, PEER_MISMATCH, SIGNER_UNAVAILABLE, SVM_DISPATCH_UNAVAILABLE, NOT_ECONOMIC_AUTHORITY, RENEWAL_TIER_UNSUPPORTED, PEER_UNSET, CHAIN_NOT_REGISTERED, FINALISE_TABLE_MISSING, FINALISE_TABLE_STALE, LINK_PUSH_UNSUPPORTED

ONBOARDING_FLOW_UNSUPPORTED is declared by the SDK for the removed reservation-first flow; nothing raises it since terminal-first onboarding (SDK 0.11). TECHNICALLY_PAUSED covers both chains: a technical pause on peaq or CORE-774's suite upgrade lock on Solana; nothing was signed, so rerun once it is released (the link push's --dry-run shows upgrade lock: …). The terminal-first codes (OPERATOR_NOT_REGISTERED through MACHINE_ID_TAKEN_ON_PEAQ) are the Solana terminal's refusals of a request, raised by the SDK's quote before anything is signed; REQUEST_EXPIRED through UNSUPPORTED_TOKEN_PROGRAM the terminal phases' and their waits'; ACTIVATION_NOT_BONDED, ACTIVATION_REQUEST_MISMATCH and EVM_OPERATOR_MISMATCH the mint's against the bonded request. On --chain solana, INSUFFICIENT_BALANCE names the owner's pay-in token account on Solana (the registration's gas shortfall stays INSUFFICIENT_PEAQ), and INVALID_TIER offers the program's tiers. OPTION_NOT_FOR_CHAIN and a local EVM_OPERATOR_MISMATCH / ESCROW_BELOW_BOND are refused before any read.

Two are worth telling apart, because they look alike and resolve differently:

• ADDRESSES_UNSET — the network is supported but its Tokenomics contracts are not deployed yet. Nothing is wrong with your configuration.
• ORACLE_UNPRICED — the contracts are deployed and reachable, but no PEAQ price is committed, so the bond cannot be quoted. A chain-side condition; nothing local will fix it.

Pending transactions. A submitted transaction whose receipt does not arrive is reported as PENDING at exit 2 with its hash — not as a failure. It may still mine, and nothing local can recall it. Re-run the same command: the CLI reconciles the recorded hash before considering another write, and a hash with no receipt blocks resubmission regardless of its age. Never submit a second activation for the same machine.

Example — --json on success:

{
  "status": "activated",
  "mode": "self-owned",
  "deployment_id": "agung-2026-08-28",
  "chain_id": "9990",
  "machine_id": "57896044618658097711785492504343953926634992332820282019728792003956564819975",
  "tier": "entry",
  "owner": "0xDC5b20847F43d67928F49Cd4f85D696b5A7617B5",
  "controller": "0xDC5b20847F43d67928F49Cd4f85D696b5A7617B5",
  "bond_amount": "400000000000000000",
  "voucher_credit": "0",
  "net_peaq_amount": "400000000000000000",
  "transaction_hash": "0xabab...",
  "is_homed_locally": true
}

Machine IDs and every unbounded chain integer are decimal strings, never JSON numbers: a uint256 exceeds what most parsers hold as a number. Progress, the preview and prompts go to stderr, so stdout carries only this object. For a Solana onboarding under --json --yes, stderr is JSON lines only: each stage's terms are a consent event (signer, wallet, action, every amount in base units against its cap, and pay_in, escrow, bond, remainder_returns, point_of_no_return), the run's plan block is a plan event, and environment warnings are warning events.

peaqos.log. Every submitted transaction is appended as one JSONL line — flushed before the receipt wait, which is what makes recovery possible — with mode 0600. Never delete it while a transaction is outstanding; the hash is the only way to reconcile it.

{"step":"activate_machine","phase":"activation","status":"pending","tx_hash":"0xabab...","machine_id":"578960...","sender_nonce":7,"deployment_id":"agung-2026-08-28","chain_id":9990,"ts":"..."}

peaqos machine

Everything after onboarding: lifecycle, subscription payments, ERC-721 ownership, DID updates, and cross-deployment relocation evidence.

peaqos machine status MACHINE_ID
peaqos machine history MACHINE_ID --chain solana
peaqos machine suspend MACHINE_ID
peaqos machine resume MACHINE_ID

peaqos machine subscription activate MACHINE_ID --tier TIER --payment RAIL [--slippage-bps N]
peaqos machine subscription renew MACHINE_ID --payment RAIL [--slippage-bps N] [--tier TIER]

peaqos machine approve MACHINE_ID OPERATOR
peaqos machine approve-all OPERATOR --allow|--revoke
peaqos machine transfer MACHINE_ID TO [--unsafe] [--data-hex HEX]

peaqos machine did set-controller MACHINE_ID CONTROLLER
peaqos machine did clear-controller MACHINE_ID
peaqos machine did set-verification-methods MACHINE_ID --file PATH
peaqos machine did set-authentication MACHINE_ID [--index N]... | --clear
peaqos machine did set-services MACHINE_ID --file PATH

peaqos machine set-evm-operator MACHINE_ID EVM_OPERATOR --chain solana

peaqos machine relocation status MACHINE_ID \
  --destination-rpc-url URL --destination-deployment-id ID

Every write accepts --yes and --json. Every read accepts --json. Every management write also accepts --dry-run, which previews and reconciles and then stops without signing anything.

Solana-homed machines

The commands above reach a Solana-homed machine with --chain solana, which selects the native SDK path. It is a routing choice and not a claim about where the machine lives — the SDK still resolves that from the machine ID and refuses a request for the wrong chain.

peaqos machine status MACHINE_ID --chain solana
peaqos machine transfer MACHINE_ID TO --unsafe --chain solana
peaqos machine did set-controller MACHINE_ID CONTROLLER --chain solana
peaqos machine suspend MACHINE_ID --chain solana
peaqos machine set-evm-operator MACHINE_ID 0xOperator --chain solana

Native support is an optional install: pip install 'peaq-os-cli[solana]'.

Four things differ from the peaq path, and each is refused rather than approximated:

• Safe transfer does not exist. A native machine is a program-owned record with no ERC-721 receiver hook, so --unsafe is required and --data-hex is refused, including 0x.
• ERC-721 approval does not exist. approve and approve-all are refused when scoped to Solana. There are no transfer rights to delegate.
• set-evm-operator is Solana-only. It maintains the subscription link and has no peaq counterpart.
• Addresses are base58, and are never converted to or from EVM addresses.

machine status --chain solana keeps native and peaq facts in separate sections: the native owner and controller are Solana keys, the EVM operator is the peaq address whose subscription covers the machine, and the mirrored tier is a copy rather than the authoritative subscription. Operator synchronization is reported as unavailable with its reason — this SDK establishes it only while performing the write, so no keyless read can confirm it.

It also reports the finalized peaq block every peaq value was read at (peaq.block, peaq.block_hash; "Observed block N (finalized)"), the RPC hosts read from (endpoints), and the link block: whether peaq applied the machine's link push, read from the Solana push account and peaq's watermark by ID alone. Human output prints it as one line, for example Link: seq 1 on Solana, applied on peaq (current; read at finalized block N), or not pushed yet, pushed (seq S), not yet applied on peaq, unavailable (<reason>). linked is not "onboarding complete": completion needs the onboarding push's own sequence, which only the journal names, so it stays with activate.

Solana status and onboarding evidence report subscription_source as mirror or terminal, identifying which account the deployed programs use according to the SDK. Both SubscriptionMirror and SubscriptionTerminal remain visible when read, with separate values from the authoritative peaq subscription state. Status JSON includes terminal presence, tier, status and last sequence; onboarding evidence also includes its period end. These numeric fields are decimal strings. An unread terminal has null fields, distinct from an account reported as absent; human status labels it not read with --chain solana, or not supplied by SDK on the default status path. Tier 0 is Entry and does not mean no subscription.

What an onboarding did: machine history --chain solana

peaqos machine history MACHINE_ID --chain solana lists every transaction of a machine's terminal-first onboarding, on both chains, in time order: what it did (registration, request, credit, finalise, bond, native_onboarding, linkage, link_delivery …), who sent it (owner, operator, node, layerzero), its slot or block (finalized) and what it cost its payer, then the totals per payer. It is keyless and runs from any directory: the SDK rebuilds it from the machine ID (get_solana_onboarding_history), with no peaqos.log, no original inputs and no wallet. -v adds full references and explorer links (Solscan, peaq Subscan, LayerZero Scan, or the Trust Validator outbox for a push the node carried; a convenience, not evidence); --json carries every amount as a decimal string. A source that could not be read is named and the command exits 2; the rows shown are still exact.

Every peaqos activate --chain solana write also leaves onboarding-<machine-id>.json beside peaqos.log: one entry per invocation (start, end, exit code, stages, error codes), the latest references, spent and audit trail, and, once the onboarding is complete, the same history. It is for people; reruns resume from peaqos.log only.

machine status --json emits one stdout object on success or any handled failure after command syntax is accepted. Errors contain status: "error", error_code, message, and guidance, plus available sanitized SDK context. Exit codes remain 1 for invalid input/unsupported actions, 2 for read failures, and 3 for missing configuration or dependencies. Human errors use stderr.

machine status and machine relocation status require no configured private key or wallet unlock. Read clients use a fresh temporary key held in memory to satisfy the SDK constructor. Write commands continue to use your configured signing credentials.

Optional Solana configuration:

Setting	Environment variable	Root flag
Solana RPC endpoint	PEAQOS_SVM_RPC_URL	--svm-rpc-url
Requested Solana cluster	PEAQOS_SVM_NETWORK	--svm-network

Place root flags before the command group. Flags override environment variables, which override .env. Both settings are optional and have no default. They remain separate from PEAQOS_RPC_URL, PEAQOS_NETWORK, and TOKENOMICS_DEPLOYMENT_ID; choosing a cluster does not choose a machine's home chain. The CLI loads these settings for configuration, whoami diagnostics and native current-state status reads.

machine status MACHINE_ID --json preserves successful EVM management reads. When Solana settings are supplied and the SDK reports no local management record or a foreign home, it also supports the SDK ID-only native current-state read. No original onboarding inputs, history bound, wallet selection, journal or home override is required. The native_current_state section preserves absent, reserved, pending_external, present, conflict, in_flight and unavailable, with separate finalized peaq and confirmed native observations. Native identity and mirrored tier remain separate from authoritative peaq subscription state. Successful observations exit 0, including pending/conflicting states; missing configuration/dependencies exit 3 and read errors exit 2 while retaining available observations. present does not prove a creation receipt, original payload or completed linkage. Dedicated native DID-document command integration remains separate.

To display a requested cluster alongside your existing wallet diagnostics:

peaqos --svm-network devnet whoami

This displays an unverified setting and any available SDK metadata. It does not contact Solana or change the selected peaq deployment. Keep credential-bearing RPC URLs in local environment configuration rather than command arguments.

Status-specific codes include CONFIG_ERROR for local configuration, DEPENDENCY_MISSING for missing SDK packages, and TIMEOUT for transport timeouts. MACHINE_HOMED_ELSEWHERE means the EVM management read found another home chain; for a supported Solana home, configure both SVM settings and a compatible SDK to enable the ID-only fallback described above. Unknown SDK codes remain visible in sdk_code when provided.

Machine IDs are full-width uint256. Pass them as canonical unsigned decimal — no 0x, no leading zeros, no exponents. They come back as decimal strings in --json, because a JSON number cannot carry a uint256 without rounding it.

What every write does, in order

1. Validate your input locally. Nothing reaches the chain until it passes.
2. Reconcile the journal. A previously submitted transaction for the same action and machine is settled first — and blocks, rather than being repeated.
3. Ask the SDK for a preview. The chain, target contract, method signature, current state and intended effect all come from there; the CLI infers none of them.
4. Show that preview, plus what this specific action risks, and ask.
5. Submit once, recording the hash before waiting for a receipt.

--json changes output only. It never confirms a write. For scripts, --yes is the only non-interactive consent; without it, a non-TTY stdin fails before anything is approved or submitted. Previews and prompts go to stderr, so stdout carries exactly one JSON object.

Reruns never resubmit

Submitted hashes are appended to ./peaqos.log (mode 0600) before the receipt wait, which is the only way a timeout stays recoverable. Re-running the same command reconciles that record instead of sending a second transaction:

• still pending — reports the prior hash and exits 2. Age, mempool visibility and account nonce are not treated as evidence it was dropped.
• confirmed — reports the reconciled result and exits 0.
• failed or conflicting — reports every disagreement and exits 2. Nothing is retried automatically, ever.

A pending write blocks by action and machine, not by its details. A pending transfer blocks another transfer regardless of recipient or safe/unsafe mode; a pending renewal blocks another even if a fresh quote differs.

DID arrays and transfer data are stored as hashes, never contents. So a rerun must supply the same --file or --data-hex: if the rebuilt input does not match the recorded hash, the CLI says so and stops rather than reconciling the wrong payload.

The parts with teeth

approve-all is not scoped to one machine. It grants the operator every MachineRegistry machine the signer owns, including ones onboarded later. The preview says so in those words.

transfer is safe by default. safeTransferFrom asks a contract recipient whether it can receive an ERC-721 and reverts if it cannot. --unsafe selects transferFrom, which does not — an incompatible contract recipient strands the NFT permanently. --data-hex selects the four-argument safe overload and is rejected with --unsafe, which has no such overload. The sender is read from SDK machine state, never typed. Transfer does not rotate the DID controller; the retained controller is shown before and after.

Clearing a controller is its own command. set-controller refuses the zero address and clear-controller takes no address, so a typo truncated to zero cannot revoke permissions while you believed you were granting them. Clearing states that the controller loses its owner-or-controller rights.

DID setters replace whole arrays. The file or index list you pass is the complete new state; anything currently stored and absent from it is removed. Authentication indices point into the verification-method array by position, so reordering or shrinking it changes what they refer to. --index and --clear are mutually exclusive and one is required — clearing is a deliberate change, never a default.

Subscription rails. --payment peaq passes back the previewed net PEAQ; --payment usdt requires --slippage-bps (0..10000) and passes back the previewed maximum USDT, unchanged. Renewal extends from the current period end, not from now. Points and credits accrue to the machine's owner even when a controller pays, and output keeps owner and caller/payer as separate fields.

Renewal renews at the stored tier unless --tier is given. With --tier (entry | basic | pro, the same choices as activate), the new period is bought at that tier and priced at the full new-tier bond. The contract refuses a tier change while the subscription is Active and applies it from Grace or Runoff; the preview shows Stored tier, Renews at, Tier change and Tier change allowed (yes, or not while Active — from <period end>) before asking for consent, and the confirmation names both tiers when they differ. A refused change fails with TIER_CHANGE_WHILE_ACTIVE before any allowance is granted: re-run without --tier to renew now, or with --tier after the period end. A tier equal to the stored one is passed through as typed. On a deployment whose SDK record does not carry the tier-taking renew (none does as of 2026-09-22), --tier fails with RENEWAL_TIER_UNSUPPORTED before any RPC. PEER_UNSET means the protocol's InfoDesk registry has no address for a role the write needs — the deployment is mis-wired or mid-upgrade; nothing was submitted.

Relocation is read-only. relocation status distinguishes pending, arrived, completed and cancelled, and never calls destination arrival alone a completion. It takes no raw EVM, protocol or LayerZero chain IDs; the SDK derives them from each deployment. Initiation and cancellation are absent until the protocol publishes a fee quote.

# Read the full management state
peaqos machine status 42 --json

# Take a machine out of service, then restore it
peaqos machine suspend 42 --yes
peaqos machine resume 42 --yes

# Renew at the stored tier, paying in USDT with 0.5% accepted movement
peaqos machine subscription renew 42 --payment usdt --slippage-bps 50 --yes

# Renew at a different tier (accepted from Grace or Runoff, refused while Active)
peaqos machine subscription renew 42 --payment peaq --tier pro --yes

# Hand ownership over safely, then let the new owner set their own controller
peaqos machine transfer 42 0xRecipient --yes

Exit codes and error_code values are the ones documented under peaqos activate — one taxonomy for both.

peaqos stream publish

Chunk, encrypt, and sign data for the peaqOS stream pipeline. Takes raw data (local file or URL), splits it into fixed-size chunks using the SDK's build_chunk_chain, encrypts each chunk with a unique XChaCha20-Poly1305 key wrapped for owner/operator/machine recipients, signs the chain with an Ed25519 key, and writes output files to a local directory.

Optionally upload encrypted blobs and chunk envelopes to S3-compatible storage with --s3. Local output is always written; S3 upload is additive.

peaqos stream publish \
  --input ./sensor-data.bin \
  --output-dir ./chunks/ \
  --owner-public-key <x25519-hex> \
  --operator-public-key <x25519-hex> \
  --machine-public-key <x25519-hex> \
  --signing-key-file ./ed25519.key \
  --machine-did did:peaq:0x... \
  --machine-key-id did:peaq:0x...#keys-1

# URL input (downloaded automatically)
peaqos stream publish \
  --input https://example.com/data.bin \
  --output-dir ./chunks/ \
  ...

# Custom chunk size and JSON output
peaqos stream publish \
  --input ./data.bin \
  --output-dir ./chunks/ \
  --chunk-size 1024 \
  --json \
  ...

# S3 upload (requires optional boto3 extra — see below)
peaqos stream publish \
  --input ./data.bin \
  --output-dir ./chunks/ \
  --s3 s3://my-bucket/data-stream/ \
  ...

# MinIO or other S3-compatible endpoint
peaqos stream publish \
  --input ./data.bin \
  --output-dir ./chunks/ \
  --s3 s3://peaq-stream/chunks/ \
  --s3-endpoint http://localhost:9000 \
  --s3-region us-east-1 \
  ...

Flags

Flag	Required	Default	Description
--input	Yes	—	File path or URL to the source data.
--output-dir	Yes	—	Directory to write chunk files. Created if missing.
--owner-public-key	Yes	—	Owner X25519 public key (hex).
--operator-public-key	Yes	—	Operator X25519 public key (hex).
--machine-public-key	Yes	—	Machine X25519 public key (hex).
--signing-key-file	Yes	—	Path to Ed25519 private key file (hex).
--machine-did	Yes	—	Machine DID (e.g. did:peaq:<address>).
--machine-key-id	Yes	—	DID key reference (e.g. did:peaq:<address>#keys-1).
--chunk-size	No	262144	Bytes per chunk (256 KB default).
--json	No	—	Output manifest as JSON to stdout.
--s3	No	—	S3 bucket path (e.g. s3://my-bucket/prefix/). Enables upload.
--s3-region	No	from env	Region for the S3-compatible service.
--s3-endpoint	No	from env	Custom S3-compatible endpoint URL (MinIO, R2, etc.).

S3 upload (optional)

S3 support requires the optional boto3 dependency:

pip install peaq-os-cli[s3]

When --s3 is used, the command uploads each chunk-{n}.bin, rewrites each chunk-{n}.json with an updated storageRef, uploads the envelopes and manifest.json, and adds s3Bucket / s3Prefix to the manifest. Upload progress is printed to stderr (suppressed by global --quiet). Partial upload failures are not cleaned up — re-run the command to retry idempotently.

Credentials and endpoint configuration

Variable	Description
PEAQOS_S3_ACCESS_KEY_ID	Access key ID for the S3-compatible service.
PEAQOS_S3_SECRET_ACCESS_KEY	Secret access key.
PEAQOS_S3_REGION	Default region (overridden by --s3-region).
PEAQOS_S3_ENDPOINT	Default custom endpoint URL (overridden by --s3-endpoint).

When PEAQOS_S3_* credentials are not set, the CLI falls back to the standard boto3 credential chain (shared credentials file, instance profiles, etc.).

Output

Creates chunk-{n}.json (envelope), chunk-{n}.bin (encrypted data), and manifest.json in the output directory. Without --s3, each chunk's storageRef is null.

Example (human output):

Chunking 1048576 bytes into 4 chunks...

Published 4 chunks to ./chunks/

  Schema:       peaq.stream.chunks.v1
  Source Hash:  0xabc123...
  Chunk Size:   262144 bytes
  Machine DID:  did:peaq:0xAbc...

  Files:
    chunk-0.json  chunk-0.bin
    chunk-1.json  chunk-1.bin
    chunk-2.json  chunk-2.bin
    chunk-3.json  chunk-3.bin
    manifest.json

Example (human output with --s3):

Chunking 1048576 bytes into 4 chunks...
Uploading chunk-0.bin to S3...
Uploading chunk-0.json to S3...
...

Published 4 chunks to ./chunks/
Uploaded 4 chunks to s3://my-bucket/data-stream/

  Schema:       peaq.stream.chunks.v1
  Source Hash:  0xabc123...
  Chunk Size:   262144 bytes
  Machine DID:  did:peaq:0xAbc...
  S3 Bucket:    my-bucket
  S3 Prefix:    data-stream/

  Files (local + S3):
    chunk-0.json  chunk-0.bin  → s3://my-bucket/data-stream/chunk-0.bin
    chunk-1.json  chunk-1.bin  → s3://my-bucket/data-stream/chunk-1.bin
    chunk-2.json  chunk-2.bin  → s3://my-bucket/data-stream/chunk-2.bin
    chunk-3.json  chunk-3.bin  → s3://my-bucket/data-stream/chunk-3.bin
    manifest.json              → s3://my-bucket/data-stream/manifest.json

With --json and --s3, stdout includes s3Bucket, s3Prefix, and a chunks array with per-chunk storageRef values.

peaqos show machine

Display the current MCR profile envelope for a machine DID, including current metadata, rating and recent events. These public HTTP reads require no wallet, RPC, program accounts or IDLs. With TOKENOMICS_DEPLOYMENT_ID set, use a decimal machine DID; without it, legacy queries retain address-form machine DIDs.

peaqos show machine did:peaq:42
peaqos show machine did:peaq:42 --json   # raw JSON to stdout

Example output:

  Machine: did:peaq:42

    Machine ID:  42
    Operator  :  did:peaq:0x9Eea...641C

    Current Metadata:
      documentation_url:  https://example.com/docs
      data_visibility  :  public

    MCR Snapshot:
      Rating     :  B
      Score      :  31 / 100
      Bond Status:  bonded

    Recent Events:
      Total            :  10
      Last Event       :  2026-04-20T14:30:00Z
      Last Origin Value:  123
      Last Currency    :  HKD
      Last Subunit     :  100
      Last Status      :  ok
      Last USD Value   :  0.13

When the most recent event is a revenue event, the block surfaces the PRO-336 / PRO-334 FX fields. Last USD Value is rendered as USD dollars (Decimal-quantised to 2 places — usd_value=13 → 0.13, usd_value=150 → 1.50). When amount_status is "unsupported_currency" or "fx_unavailable", the Last USD Value row shows — (em-dash) so the CLI never displays a misleading USD number for a row whose FX state the server flagged as unreliable:

    Recent Events:
      Total            :  10
      Last Event       :  2026-04-20T14:30:00Z
      Last Origin Value:  100
      Last Currency    :  XYZ
      Last Status      :  unsupported_currency
      Last USD Value   :  —

Activity events (eventType=1) omit all five FX lines.

peaqos show operator machines

List machines owned or controlled by an operator in a tabular summary (peaqID, Machine ID, MCR, Rating). Operator DIDs remain address-based in both modes. Membership does not establish native ownership or permission to sign Solana consent, and this endpoint does not promise complete native enumeration.

peaqos show operator machines did:peaq:0x<40-hex>
peaqos show operator machines did:peaq:0x<40-hex> --json   # raw JSON to stdout

Example output:

  Operator: did:peaq:0x9Eeab1aCcb1A701aEfAB00F3b8a275a39646641C
  Machines: 3
  Membership: owned or controlled

peaqID                                              Machine ID   MCR   Rating
────────────────────────────────────────────────────────────────────────────
did:peaq:45                              45           31    B
did:peaq:46                              46           75    A
did:peaq:47                              47           55    BB

peaqos qualify event

Submit one machine event on-chain via the Event Registry (submitEvent).

Prerequisites

Configure .env in the CLI directory (or export the same variables): private key, RPC URL, and contract addresses. See peaq_os_cli.config.load_client.

Required flags

Flag	Meaning
--machine-id	Positive integer machine identity.
--type	revenue or activity.
--value	Non-negative integer as ISO 4217 subunit per PRO-334. BREAKING: pre-PRO-334 callers passed whole-currency amounts; the wire is now subunit. Example: HK$1.23 → --value=123 --currency HKD; ¥100 → --value=100 --currency JPY (JPY has no minor unit). Partner is responsible for the conversion.
--ts	Event time: Unix seconds (digits only) or ISO 8601 with timezone (Z or +hh:mm).

Use a timestamp on or before the chain's block time. If --ts is ahead of the network clock, the contract can revert with FutureTimestamp.

Common options

Flag	Meaning
--trust	self (default), onchain, or hardware.
--source-chain	same, peaq, or base (maps to a chain id for the SDK).
--source-tx	32-byte tx hash (hex, 0x optional). Required when --trust is onchain.
--raw-data	File path; file bytes are hashed and stored as the event data hash.
--metadata	File path; bytes are sent as on-chain metadata.
--currency	Per PRO-336 §6 — currency code for revenue events (e.g. USD, HKD, 3-10 uppercase alphanumeric chars). Activity events take "". Omit to use the SDK's smart default ("USD" for revenue, "" for activity).

Examples

# Revenue event (self-reported trust, default source chain)
peaqos qualify event --machine-id 42 --type revenue --value 100 --ts 1735000000

Event submitted.
  Machine ID:  42
  Type:        revenue
  Value:       100
  Trust:       self-reported
  Tx:          0x3f4a8c1e2d9b7f05a6c3e8d1f4b2a7c9e0d5f3b1a8e2c6d9f7b4a1e3c5d8f2b4
  Data Hash:   0xa1b2c3d4e5f67890a1b2c3d4e5f67890a1b2c3d4e5f67890a1b2c3d4e5f67890

# Activity with ISO timestamp
peaqos qualify event --machine-id 42 --type activity --value 0 --ts "2026-04-22T12:00:00Z"

# On-chain-verified event with a source tx hash
peaqos qualify event --machine-id 42 --type revenue --value 200 --ts 1735000000 \
  --trust onchain \
  --source-tx 0xabcdef1234567890abcdef1234567890abcdef1234567890abcdef1234567890ab

# Attach a payload file (raw data is hashed on submit)
peaqos qualify event --machine-id 42 --type activity --value 0 --ts 1735000000 \
  --raw-data ./sensor.bin

peaqos qualify mcr

Read a machine's credit rating through the SDK's public HTTP query client. A configured or locked wallet is not opened for this read.

# Tokenomics mode: the deployment selects the MCR endpoint.
export TOKENOMICS_DEPLOYMENT_ID=peaq-mainnet
peaqos qualify mcr did:peaq:42
peaqos qualify mcr did:peaq:42 --json
peaqos show machine did:peaq:42 --json
peaqos show operator machines did:peaq:0x9Eeab1aCcb1A701aEfAB00F3b8a275a39646641C --json

Machine DIDs use canonical decimal IDs in 0..2^256-1, without leading zeros except 0. Operator DIDs always use did:peaq:0x<40-hex>. Legacy machine DIDs retain that address form only when TOKENOMICS_DEPLOYMENT_ID is absent from both the environment and .env. A present but empty deployment setting is an error. Tokenomics queries use the SDK-selected endpoint and ignore legacy API overrides; there is no automatic legacy fallback.

--json preserves the SDK response envelope and converts every machine_id to a decimal string, including nested profile/list entries. Scores, protocol chain IDs and timestamps retain their numeric types; null metrics stay null. The rating label is mcr; the CLI does not synthesize a duplicate mcr_rating field.

A non-empty rating_unavailable explains why no rating can be computed. Human output labels the score as a floor and shows the reason; a zero score alone does not imply unavailable history. Null trend, average revenue and last-update values display as unavailable. mcr_degraded remains independent of this reason.

Native profile fields, when returned, stay inside peaqos: owner and nullable controller retain their base58 case, home_chain is a protocol ID (Solana is 5), and machine_type/relocating retain their types. Missing fields remain absent. A null operator means not designated; it does not imply missing native ownership. Metadata comes from the current profile, without a legacy attribute fallback.

After Click accepts command syntax, handled --json failures emit one stdout object with status: "error", error_code, message, guidance, and any safe context. There is no duplicate Click error line. Exit codes are 1 for input/confirmation, 2 for API/network/response failures, and 3 for configuration/capability failures. Typed 404, distinct 409 home/eligibility codes and 503 outage codes are preserved; raw server bodies and signing material are omitted.

peaqos monetize

Manage a machine's Tokenomics 2.0 monetisation decision in the MCR. status is a public read; opt-in and opt-out are signed, off-chain decisions. The SDK owns compatibility, authorization context, message signing, retries, HTTP and response validation. Live query compatibility is independent of the planned native write rollout.

Usage

peaqos monetize status  KEY [--timeout-seconds SECONDS] [--max-unavailable-retries INTEGER] [--unavailable-retry-delay-seconds SECONDS] [--json]
peaqos monetize opt-in  KEY [--timeout-seconds SECONDS] [--max-unavailable-retries INTEGER] [--unavailable-retry-delay-seconds SECONDS] [--yes] [--json]
peaqos monetize opt-out KEY [--timeout-seconds SECONDS] [--max-unavailable-retries INTEGER] [--unavailable-retry-delay-seconds SECONDS] [--yes] [--json]

KEY is either a canonical decimal machine ID in 0..2^256-1, or did:peaq:<canonical-decimal-machine-id>. A leading zero (except the value 0), sign, whitespace, fraction, exponent, hexadecimal value, address-based DID, or value at least 2^256 is rejected locally before SDK I/O. The decimal DID suffix is already the machine ID; the CLI performs no legacy DID lookup.

Option	Default	Behaviour
--timeout-seconds	30.0	Positive, finite end-to-end deadline for each SDK call. Confirmation time is outside it.
--max-unavailable-retries	2	Non-negative retries for the write after MACHINE_UNAVAILABLE; SDK reads are not retried.
--unavailable-retry-delay-seconds	1.0	Positive, finite pause before each SDK write retry.
--yes / -y	off	The only non-interactive confirmation for opt-in and opt-out.
--json	off	Emit one state or structured error object on stdout. It changes output only and never confirms a write.

Every command requires TOKENOMICS_DEPLOYMENT_ID. The SDK resolves the MCR URL, chain ID, Machine Registry, and API version from that approved deployment and the live compatibility signal. status and already-satisfied decisions require no signer. A needed EVM write uses the selected PEAQOS_OWS_WALLET and shared vault-passphrase settings, or PEAQOS_PRIVATE_KEY when no wallet is selected; its signer must be the current owner or controller. An OWS failure never falls back to a raw key. Optional signing dependencies load only when a write is needed.

Legacy PEAQOS_MCR_API_URL, IDENTITY_REGISTRY_ADDRESS, and PEAQOS_RPC_URL values are not read by these monetisation commands. An explicitly supplied legacy --api-url is rejected with exit 3 and is intentionally hidden from help.

Before a write, the CLI reads the current state. An already-satisfied state returns successfully without a prompt, signature, or PUT. Otherwise the SDK prepares the authorization context and the CLI shows the deployment, decimal machine ID, current/requested states, home protocol ID, native owner and selected signing chain/address. Unavailable metadata is labeled explicitly. The reviewed context is passed back to the SDK, which rejects changed home/owner context before signing and on retries. Without --yes, stdin must be a TTY and the operator must confirm that the decision is stored off-chain in the MCR with that signing address as authorizer. Non-TTY input or a declined prompt exits 1 without a PUT.

Opt-in eligibility, including bond and lifecycle state, is enforced by the MCR. Opt-out is not locally blocked by those conditions; only an exact final 503 MACHINE_UNAVAILABLE from its initial state read permits proceeding with unknown current status. A TTY confirmation or --yes is still required; other failures, including 503 CHAIN_UNAVAILABLE, stop the write. Compatibility, authorization and context checks remain mandatory.

Planned Solana writes require the SDK's verified server capability and the current native owner, using the selected OWS wallet and the SDK's Ed25519 message signer. Native controllers, EVM operators and former owners are not authorized by those roles alone. The currently verified local SDK leaves this capability disabled. --yes skips only the prompt; it cannot enable native rollout or bypass validation. No private key export, alternate signer, transaction, gas or rent workflow is used.

Examples

# Turn monetisation on (prompts on interactive stdin)
peaqos monetize opt-in did:peaq:42

# Turn it off from a script after reviewing the decision
peaqos monetize opt-out 42 --yes

# Read the current state (public, no signing key)
peaqos monetize status 42

  Monetization status

    Deployment:  agung-2026-08-28
    Machine ID:  42
    Status:      OPTED_IN
    Signer:      0x7099...79C8
    Updated At:  2026-07-13T12:00:04Z

# Machine-readable JSON for jq / scripts
peaqos monetize status 42 --json

{
  "machine_id": "42",
  "status": "OPTED_IN",
  "signer": "0x70997970C51812dc3A010C7d01b50e0d17dc79C8",
  "updated_at": 1783944004
}

A PENDING state renders Signer and Updated At as — (and as null in JSON). machine_id is always a decimal string in JSON, including values above JavaScript's safe-integer range.

Tokenomics 2.0 state normally starts at PENDING; Tokenomics 1.0 decisions, IDs, and signatures are not translated or imported.

Typical failures

Situation	Exit	What you see
Invalid or noncanonical KEY or option value	1	Validation message before SDK I/O
Declined prompt or non-TTY write without --yes	1	No write was sent
Missing/unknown TOKENOMICS_DEPLOYMENT_ID or incompatible MCR API	3	Deployment or compatibility guidance
Explicit legacy --api-url	3	Use TOKENOMICS_DEPLOYMENT_ID; raw URL overrides are unsupported
Signing key is not owner or controller (UNAUTHORIZED_SIGNER)	2	Owner/controller authorization guidance
Ineligible opt-in (MACHINE_NOT_BONDED / MACHINE_DEACTIVATED)	2	Server code and remediation
Network failure, timeout, cancellation, bad response, or API rejection	2	Stable mapped error; server code when available

A timeout or network failure during a PUT is ambiguous: the MCR may have applied it. The CLI reports that the state is unknown and instructs you to rerun the same command. That rerun performs the GET first and sends no second PUT when the requested state is already present.

peaqos monetize provision

Provision an opted-in machine as a compute provider node from a schema-driven manifest. These commands are thin wrappers over the SDK's manifest runner: the SDK fetches and validates the manifest, runs every command through its executor, redacts secrets, and decides success. The CLI adds argument parsing, interactive prompts, terminal rendering, and the resume state file — it never runs a provisioning command itself.

Success means verification probes pass, not that install commands exited zero. The manifest is provider-agnostic: all provider specifics (commands, prompts, captures, probes, commission field) live in the manifest, never here.

Usage

peaqos monetize provision run       <provider> --machine <key> [--mode manual|auto] [--grant-sudo]
                                               [--inputs <file>] [--manifest-repo <url>] [--manifest-version <v>]
                                               [--state-file <path>] [--resume] [--yes]
peaqos monetize provision preflight <provider> [--machine <key>] [--mode manual|auto] [--grant-sudo]
                                               [--inputs <file>] [--manifest-repo <url>] [--manifest-version <v>]
peaqos monetize provision verify    <provider> [--state-file <path>] [--machine <key>] [--inputs <file>]
                                               [--mode manual|auto] [--grant-sudo]
                                               [--manifest-repo <url>] [--manifest-version <v>] [--json]

• <provider> — Manifest provider key, e.g. akash. Lowercase letters, digits, and single hyphens; the slug is interpolated into the manifest URL, so anything else is rejected.
• --machine — Required on run: a canonical decimal Tokenomics machine ID or did:peaq:<canonical-decimal-machine-id>. It drives the deployment-bound monetisation pre-check. This key contains no payout address, so run also requires PEAQOS_MACHINE_WALLET_ADDRESS for the manifest's context.machine_wallet_address; the CLI never substitutes the signing key. On preflight and verify, --machine remains an optional provisioning-context value and does not perform the monetisation pre-check.
• --mode — manual (default) confirms each command step; auto runs unattended and requires --grant-sudo. The exact command is always shown before it runs.
• --grant-sudo — Allow sudo: required commands to elevate, scoped to the manifest's allowedCommands. sudo: optional commands always run unprivileged.
• --inputs — YAML or JSON file of manifest input values. Any required input still missing is prompted; secret inputs are read hidden and never echoed, logged, or persisted.
• --state-file — Resume/idempotency state, default ./peaqos-provision-state.json. Written atomically (0600) after each completed step and at owner-action pauses.
• --resume — Continue an interrupted run. The persisted non-secret inputs are restored, so the original --inputs file is not needed (secrets are re-prompted, since they are never persisted); an explicit --inputs value still wins. Applied only after the state file's provider, machine wallet, manifest digest, resolved inputs, and schema version all match this invocation; any mismatch exits 1 rather than skipping steps done under different values.
• --yes / -y — Auto-confirm command steps. Owner-action steps still pause — funding, DNS, and signing handoffs are never auto-confirmed.

run requires PEAQOS_MANIFEST_REPO_URL (or --manifest-repo), TOKENOMICS_DEPLOYMENT_ID for the public monetisation pre-check, and PEAQOS_MACHINE_WALLET_ADDRESS for provider payout context. The pre-check does not use PEAQOS_MCR_API_URL, IDENTITY_REGISTRY_ADDRESS, PEAQOS_RPC_URL, or a signing key.

What run does

[1/6] Monetisation status   deployment-bound SDK GET; anything but OPTED_IN stops here
[2/6] Manifest              fetched and pinned by sha256 over the source bytes
[3/6] Inputs                merged, prompted, validated; pin written to the state file
[4/6] Pre-flight            a blocking failure aborts before any phase runs
[5/6] Provisioning          steps run, state checkpointed after each one
[6/6] Verification          the node is live only when every success probe passes

Examples

# Full manual run (confirms each command; owner actions always pause)
export PEAQOS_MACHINE_WALLET_ADDRESS=0x9a5F1E244c15e491Ae571c5bF77fDD836ddc37C5
peaqos monetize provision run akash \
  --machine did:peaq:42 \
  --inputs ./akash-inputs.yaml

  Provider node provisioned.
    Provider:         akash
    Version:          0.3.0
    Probes:           4/4 passed
    providerAddress:  akash1abc…xyz

# Dry gate before committing to a run
peaqos monetize provision preflight akash --inputs ./akash-inputs.yaml

# Unattended run within the manifest's sudo allowlist
peaqos monetize provision run akash \
  --machine 42 \
  --inputs ./akash-inputs.yaml --mode auto --grant-sudo --yes

# Continue after an interruption (persisted inputs are restored; secrets are re-prompted)
peaqos monetize provision run akash \
  --machine did:peaq:42 --resume

# Re-check an already-provisioned node against the pinned manifest
peaqos monetize provision verify akash --json | jq '.[] | select(.passed == false)'

verify refetches the pinned manifest, recomputes its digest, and rebuilds probe context from the persisted inputs, captures, and wallet. It never resolves latest silently, and a capture a probe needs but the state file cannot supply is an error — captures come from provisioning, so they are never prompted or rendered empty.

Typical failures

Situation	Exit	What you see
Machine not opted in (PENDING / OPTED_OUT)	2	Machine … is not opted in … Run 'peaqos monetize opt-in …' first (no manifest fetched)
Bad <provider> slug, bad --machine, --mode auto without --grant-sudo	1	Names the problem and the fix
Missing PEAQOS_MACHINE_WALLET_ADDRESS on run	1	Requests the provider payout wallet override
Manifest fetch / schema failure (incl. non-compute category)	2	Names the URL or the offending schema path
Input fails the manifest's validation	1	Names the input key and constraint
Blocking pre-flight check	2	Lists the failing checks with remediation (nothing is provisioned)
Step failure	2	Names phase/step and hints --resume
--resume binding mismatch	1	Names the differing field; start a fresh run
Resume needs an unrestorable secret capture	2	Names the capture; start a fresh run
Verification probes failed	2	Lists the failed probes (the node is not reported live)
verify digest mismatch / stale override	2	manifest changed since provisioning, or requires a fresh run
Missing PEAQOS_MANIFEST_REPO_URL or TOKENOMICS_DEPLOYMENT_ID	3	Missing-var message

peaqos scale agent pair

Pair an AI agent to an activated machine via the challenge-sign flow. Requests a pairing challenge, collects the agent's EIP-191 signature, and creates the pairing with the signed proof. The one-time pairing_token is printed on success. Subsequent commands (such as peaqos scale search) use that token via --pairing-token-file.

Requires an activated machine and a platform API key (PEAQOS_ORCH_API_KEY). The token is rendered to stdout exactly once and is never written to peaqos.log or --verbose output.

# Interactive: prompts for the EIP-191 signature
peaqos scale agent pair \
  --machine-id mach_1 \
  --agent-address 0xAgent...0101 \
  --agent-provider teneo \
  --agent-role machine-market-buyer

# Non-interactive: reads signature from file, skips confirmation
peaqos scale agent pair \
  --machine-id mach_1 \
  --agent-address 0xAgent...0101 \
  --agent-provider teneo \
  --agent-role machine-market-buyer \
  --agent-signature-file sig.txt \
  --per-tx-limit 5 --daily-limit 20 --currency USD \
  --allowed-skills pyth-price-feed,walrus-store \
  --yes

# JSON output (requires --agent-signature-file)
peaqos scale agent pair \
  --machine-id mach_1 \
  --agent-address 0xAgent...0101 \
  --agent-provider teneo \
  --agent-role machine-market-buyer \
  --agent-signature-file sig.txt \
  --json

peaqos scale machine onboard

Onboard a machine into the Machine Market. Four-step wizard: request an identity challenge, sign it (via key file, OWS wallet, or manual paste), register the machine with identity proof, and activate it.

The CLI verifies that the signer address matches one of the DID controller addresses returned by the challenge endpoint before proceeding to registration.

Signing modes (checked in order):

1. --identity-signature-file — read a pre-signed EIP-191 signature from file.
2. --identity-key-file — read a private key from file and sign the challenge.
3. OWS wallet (PEAQOS_OWS_WALLET set) — sign via the active wallet. The key is exported from the vault for the duration of signing only.
4. None of the above — display the challenge and prompt for a pasted signature.

A raw PEAQOS_PRIVATE_KEY client does not auto-sign; it always falls through to mode 4 (manual prompt). Only --identity-signature-file, --identity-key-file, or an active OWS wallet avoid the prompt.

# Sign with a DID controller key file (non-interactive)
peaqos scale machine onboard \
  --identity-ref peaqos:machine:my-bot \
  --display-name "My Edge Node" \
  --owner-id operator-42 \
  --machine-type edge-node \
  --runtime-profile linux-docker \
  --identity-key-file ./controller.key \
  --capabilities price-feed,qvac \
  --skill-keys pyth-price-feed \
  --labels env=production,region=eu \
  --yes

# Auto-sign via OWS wallet (PEAQOS_OWS_WALLET must be set)
peaqos scale machine onboard \
  --identity-ref did:peaq:0xAbCd...1234 \
  --display-name "My Edge Node" \
  --owner-id operator-42 \
  --machine-type edge-node \
  --runtime-profile linux-docker \
  --yes

# Pre-signed signature from file
peaqos scale machine onboard \
  --identity-ref peaqos:machine:my-bot \
  --display-name "My Edge Node" \
  --owner-id operator-42 \
  --machine-type edge-node \
  --runtime-profile linux-docker \
  --identity-signature-file sig.txt \
  --yes

# Interactive: prompts for a pasted EIP-191 signature
peaqos scale machine onboard \
  --identity-ref did:peaq:0xAbCd...1234 \
  --display-name "My Edge Node" \
  --owner-id operator-42 \
  --machine-type edge-node \
  --runtime-profile linux-docker

# JSON output (requires a non-interactive signing method)
peaqos scale machine onboard \
  --identity-ref peaqos:machine:my-bot \
  --display-name "My Edge Node" \
  --owner-id operator-42 \
  --machine-type edge-node \
  --runtime-profile linux-docker \
  --identity-key-file ./controller.key \
  --json

Flags

Flag	Required	Description
--identity-ref	Yes	Machine identity reference (did:peaq:0x... or peaqos:machine:<id>).
--display-name	Yes	Human-readable machine name.
--owner-id	Yes	Operator/owner identifier.
--machine-type	Yes	Machine type (e.g. edge-node, robot).
--runtime-profile	Yes	Runtime profile (e.g. linux-docker).
--capabilities	No	Machine capabilities (comma-separated).
--skill-keys	No	Skill keys the machine supports (comma-separated).
--labels	No	Machine labels (key=value, comma-separated).
--identity-signature-file	No	Path to file containing a pre-signed EIP-191 signature.
--identity-key-file	No	Path to file containing the DID controller private key for signing. Mutually exclusive with --identity-signature-file.
--skip-activate	No	Register in draft status without activating.
-y, --yes	No	Skip confirmation prompt.
--json	No	Output raw JSON. Requires a non-interactive signing method (--identity-signature-file, --identity-key-file, or OWS wallet).

Example output

[1/4] Requesting identity challenge...
[2/4] Signing identity challenge...
      Signed with key from ./controller.key
      Signer: 0x1111...1111
[3/4] Registering machine...
[4/4] Activating machine...

Machine onboarded successfully (active).

  Machine ID:  mach_abc123
  Identity:    did:peaq:0xAbCd...1234
  Status:      active
  Name:        My Edge Node

  Next: peaqos scale agent pair --machine-id mach_abc123

peaqos scale machine status

Display details of a single machine.

peaqos scale machine status mach_abc123
peaqos scale machine status mach_abc123 --json

Example output

Machine mach_abc123

  Display name:  My Edge Node
  Status:        active
  Identity:      peaqos:machine:my-bot
  Owner:         operator-42
  Type:          edge-node
  Runtime:       linux-docker
  Capabilities:  price-feed, qvac
  Skills:        pyth-price-feed
  Created:       2026-05-16T12:00:00Z

peaqos scale machine list

List all machines registered on the orchestration service.

peaqos scale machine list
peaqos scale machine list --json

Example output

Machines

  ID                     Name                      Status   Identity               Type
  ─────────────────────────────────────────────────────────────────────────────────────────
  mach_abc123            My Edge Node              active   peaqos:machine:my-bot  edge-node
  mach_def456            Test Machine              draft    did:peaq:0xAbCd...1e8f robot

2 machines found.

peaqos scale search

Search for services matching a task in the Machine Market. The agent describes what it needs (service type, capabilities, budget) and gets back a ranked list of matching quotes.

Requires an active machine and a valid agent pairing token (--pairing-token-file).

peaqos scale search \
  --machine-id mach_1 \
  --service-type oracle.price-feed \
  --pairing-token-file ./token.txt

peaqos scale search \
  --machine-id mach_1 \
  --service-type oracle.price-feed \
  --pairing-token-file ./token.txt \
  --json   # raw JSON to stdout

Flags

| Flag | Required | Description | | --machine-id | Yes | Machine performing the search. | | --service-type | Yes | Service type (e.g. oracle.price-feed). | | --pairing-token-file | Yes | Path to file containing the agent pairing token. | | --agent-pairing-id | No | Agent pairing ID. | | --operation | No | Desired operation (e.g. get-latest-price). | | --capabilities | No | Required capabilities (comma-separated). | | --region | No | Preferred region. | | --max-results | No | Max quotes to return. | | --budget-amount | No | Budget amount. | | --budget-max | No | Maximum budget amount. | | --budget-currency | No | Budget currency (e.g. USD). | | --native-only | No | Require native execution (no external handoff). | | --allow-handoff | No | Allow external handoff. | | --provider-credentials | No | Path to JSON file with provider credentials. | | --json | No | Output raw JSON to stdout. |

Example output

Searching for "oracle.price-feed" services...

Found 2 matching services.

#  Skill Key         Provider   Score  Execution    Integration
────────────────────────────────────────────────────────────────
1  pyth-price-feed   pyth       0.95   native       native
2  dia-price-feed    dia        0.72   ext-handoff  partner-required

Search ID: msearch_449650d9b2be

Use: peaqos scale order <service-id> to place an order (when available).

When no quotes are returned:

Searching for "compute.marketplace" services...

No matching services found.

Search ID: msearch_abc123

Try broadening your search: remove --native-only, increase --budget-amount, or try a different --service-type.

Environment

Orchestration-specific variables (in .env or environment):

Variable	Purpose
PEAQOS_ORCHESTRATION_URL	Base URL of the Machine Markets API.
PEAQOS_ORCH_API_KEY	Platform API key (deployment-level auth).
PEAQOS_ORDER_STEP_DELAY_SEC	Optional seconds to pause between order placement steps.

The orchestration URL and API key can also be passed as CLI flags (--orchestration-url, --orch-api-key).

peaqos scale order <service-uuid>

Place a market order end-to-end: create the order, handle payment when required, then execute. The service UUID is the first argument (from a prior peaqos scale search quote). Registered subcommands (status, list, received, dispute) take precedence over service IDs.

Requires an active machine, agent pairing ID, and pairing token (--pairing-token-file). Progress steps are written to stderr; the final summary or --json payload goes to stdout.

Payment flows (chosen from the service quote):

Pattern	Steps	When
No payment	[1/2] create → execute	paymentStatus is not-required (e.g. native Pyth)
Wallet payment	[1/5] create → payment intent → send payment → proof → execute	EVM USDC, Solana USDT, etc.
Escrow	Same as wallet, but step 4 calls escrow lock instead of payment proof	External handoff with on-chain escrow
x402	[1/6] create → payment intent → sign → proof → execute → confirm	Agentic Market providers (paid HTTP, e.g. Wolfram Alpha over USDC)

For the x402 rail the CLI signs the provider's payment challenge locally with the active wallet (client.account — the OWS wallet when PEAQOS_OWS_WALLET is set, otherwise the local key) and hands the signed PAYMENT-SIGNATURE header to peaqOS, which pays the provider during execute. There is no separate on-chain transfer and no "paste the transaction hash" prompt. After order creation, you confirm once before payment intent, signing, proof submission, and execution; delivery is then confirmed automatically (step 6). If execution fails after proof is recorded, the error reports the current payment status so you can verify whether the authorization is held.

Payment transfer modes (step 3 when wallet payment is required; the x402 rail signs instead of transferring):

Mode	How
OWS	PEAQOS_OWS_WALLET set — CLI signs and sends the ERC-20 transfer via the OWS vault; tx hash captured automatically. Passphrase from OWS_PASSPHRASE or an interactive prompt.
Manual	No OWS wallet — CLI prints amount, chain, token, and payee; operator completes the transfer and pastes the tx hash at the > prompt.
Pre-supplied	--payment-tx-hash (+ --payment-chain, --payment-token) — skips step 3; proof submitted with the given hash/signature.

Use --skip-payment only when payment was already completed externally; combine with --payment-tx-hash to record proof without re-sending funds.

Flags

Flag / argument	Required	Description
<service-uuid>	Yes	Service ID from search results.
--machine-id	Yes	Machine placing the order.
--agent-pairing-id	Yes	Agent pairing ID (from peaqos scale agent pair).
--pairing-token-file	Yes	Path to agent pairing token file.
--search-id	No	Search ID from a prior peaqos scale search.
--quote-id	No	Quote ID from search results.
--operation	No	Requested operation (e.g. get-latest-price).
--budget-amount	No	Budget amount.
--budget-currency	No	Budget currency (e.g. USD).
--input	No	JSON file with operation input.
--provider-credentials	No	JSON file with provider credentials (never logged).
--payment-tx-hash	No	Pre-completed payment tx hash (EVM) or signature (Solana).
--payment-chain	No	Chain for proof (e.g. base, solana, peaq). Required with --payment-tx-hash.
--payment-token	No	Token for proof (e.g. USDC, USDT). Required with --payment-tx-hash.
--skip-payment	No	Skip the on-chain payment step (use with --payment-tx-hash when proof is supplied separately).
-y, --yes	No	Skip confirmation prompts.
--json	No	Output JSON to stdout (implies --yes). Contains order, execution, and payment when a payment record exists.

Set PEAQOS_ORDER_STEP_DELAY_SEC to a non-negative number of seconds to pause between placement steps for demos or eventually consistent order state. When the variable is unset, no delay is applied.

Examples

No-payment service (native execution, two steps):

peaqos scale order svc_pyth_btc_usd \
  --machine-id mach_1 \
  --agent-pairing-id pair_67c50f8fdd3c \
  --pairing-token-file ./token.txt \
  --search-id msearch_449650d9b2be \
  --quote-id quote_abc123 \
  --operation get-latest-price \
  --yes

[1/2] Creating order...
[2/2] Executing order...

Order executed.

  Order ID:      ord_e89c70259bdb
  Service:       BTC/USD (pyth-price-feed)
  Status:        delivered
  Payment:       not_required

  Confirm delivery: peaqos scale order received ord_e89c70259bdb

Manual wallet payment (operator sends USDC, pastes hash):

peaqos scale order svc_dia_eth_usd \
  --machine-id mach_1 \
  --agent-pairing-id pair_67c50f8fdd3c \
  --pairing-token-file ./token.txt \
  --yes
# Step 3 prompts: paste 0x... tx hash after transferring off-wallet

OWS auto-payment (PEAQOS_OWS_WALLET in .env):

export PEAQOS_OWS_WALLET=agent
export OWS_PASSPHRASE='...'   # optional; otherwise prompted once
peaqos scale order svc_dia_eth_usd \
  --machine-id mach_1 \
  --agent-pairing-id pair_67c50f8fdd3c \
  --pairing-token-file ./token.txt \
  --yes

[3/5] Sending payment...
      Signing transfer via OWS (wallet=agent, chain=base)
      0x3333...3333 → 0x4444...4444  1.00 USDC
      Tx: 0x602d...5584

Pre-supplied payment (skip transfer step):

peaqos scale order svc_dia_eth_usd \
  --machine-id mach_1 \
  --agent-pairing-id pair_67c50f8fdd3c \
  --pairing-token-file ./token.txt \
  --payment-tx-hash 0x602d5584... \
  --payment-chain base \
  --payment-token USDC \
  --yes

x402 paid provider (local signing, no on-chain transfer):

peaqos scale order "agentic-market:...:query:92c9d0a2" \
  --machine-id mach_1 \
  --agent-pairing-id pair_67c50f8fdd3c \
  --pairing-token-file ./token.txt \
  --input query.json

[1/6] Creating order...

Order summary:

  Order ID:  ord_3ba63e8494a8
  Service:   wolfram-alpha
  Status:    created
  Payment:   payment_pending
Proceed with payment and order execution? [y/N]: y
[2/6] Creating payment intent...
Payment required (x402).

  Amount:    $0.02
  Chain:     eip155:8453
  Token:     USDC (0x8335...2913)
  Pay from:  0x9fbd...4913
  Pay to:    0x6302...Ad57

  The agent wallet will sign the x402 authorization next.
[3/6] Signing x402 payment...
[4/6] Recording payment proof...
[5/6] Executing order...
[6/6] Confirming delivery...

Order executed.

  Order ID:      ord_3ba63e8494a8
  Service:       Wolfram Alpha
  Status:        delivered
  Payment:       paid (x402)

  Result: x^3/3 + C

External handoff (escrow + handoff URL):

Order placed (external handoff).

  Order ID:      ord_63ab7e934300
  Service:       Aethir GPU Cloud
  Status:        handoff
  Handoff:       Open Aethir Cloud → https://app.aethir.com/

  After using the external service:
    peaqos scale order received ord_63ab7e934300

JSON output (scripting):

peaqos scale order svc_pyth_btc_usd \
  --machine-id mach_1 \
  --agent-pairing-id pair_67c50f8fdd3c \
  --pairing-token-file ./token.txt \
  --yes --json

{
  "order": { "id": "ord_e89c70259bdb", "status": "delivered", "...": "..." },
  "execution": {
    "status_code": 200,
    "run": { "...": "..." },
    "outcome": { "...": "..." }
  }
}

When the order requires payment, the response also includes "payment": { "status": "held", ... }.

On partial failure after create, the error includes the order ID, current payment status, and a hint to run peaqos scale order status <id>.

peaqos scale order status <order-id>

Check order and payment state.

peaqos scale order status ord_e89c70259bdb
peaqos scale order status ord_e89c70259bdb --json

Example output

Order ord_e89c70259bdb

  Service:        BTC/USD (pyth-price-feed)
  Status:         delivered
  Execution:      native
  Created:        2026-05-16T12:00:00Z

  Payment:
    Status:       not_required
    Rail:         —
    Amount:       —

  Next: peaqos scale order received ord_e89c70259bdb

--json returns { "order": { ... }, "payment": { ... } }.

peaqos scale order list

List market orders for a machine (GET /market/orders). Supports page-by-page listing with --limit and --cursor, or fetching every order in one shot when using --json without --limit.

Flags:

Flag	Description
--machine-id	Required. Machine whose orders to list.
--limit	Page size (1–500). Omitted → server default (100).
--cursor	Opaque cursor from a previous response (next page).
--json	Machine-readable output (see below).

Human output (default) returns one page. When the API includes a next_cursor, a copy-paste hint is printed after the table. Cursors are shown verbatim in the hint and are never written to logs (even with --verbose).

peaqos scale order list --machine-id mach_prod_smoke_mcr_1
peaqos scale order list --machine-id mach_prod_smoke_mcr_1 --limit 10
peaqos scale order list --machine-id mach_prod_smoke_mcr_1 \
  --limit 10 --cursor eyJ2IjoxLCJvZmZzZXQiOjJ9

Example output (human)

Orders for mach_prod_smoke_mcr_1

  ID                     Service                   Status      Execution   Created
  ─────────────────────────────────────────────────────────────────────────────────
  ord_e89c70259bdb       BTC/USD (pyth-price-feed) confirmed   native      2026-05-16T12:25:00Z
  ord_63ab7e934300       Aethir GPU Cloud          disputed    ext-handoff 2026-05-16T13:00:00Z

2 orders shown.

Next page: peaqos scale order list --machine-id mach_prod_smoke_mcr_1 --cursor eyJ2IjoxLCJvZmZzZXQiOjJ9

When there is no next page, only the count line is shown (no Next page: line).

JSON output:

Invocation	Shape
--json (no --limit)	Root array of all orders across pages (auto-paginated).
--json --limit N	Single page: { "items": [...], "next_cursor": "..." | null }.

# All orders (pipe-friendly for jq)
peaqos scale order list --machine-id mach_1 --json | jq '.[] | .id'

# Manual paging
peaqos scale order list --machine-id mach_1 --json --limit 5

[
  { "id": "ord_e89c70259bdb", "status": "delivered", "...": "..." },
  { "id": "ord_63ab7e934300", "status": "handoff", "...": "..." }
]

{
  "items": [{ "id": "ord_e89c70259bdb", "...": "..." }],
  "next_cursor": "eyJ2IjoxLCJvZmZzZXQiOjJ9"
}

Invalid --limit (0, negative, or above 500) exits with code 1 and: Limit must be between 1 and 500.

peaqos scale order received <order-id>

Confirm delivery and release escrowed funds. The order must be in delivered status (native execution or after external handoff).

peaqos scale order received ord_e89c70259bdb \
  --pairing-token-file ./token.txt

peaqos scale order received ord_e89c70259bdb \
  --pairing-token-file ./token.txt \
  --json

Example output

Delivery confirmed.

  Order ID:  ord_e89c70259bdb
  Status:    confirmed
  Payment:   release_pending

peaqos scale order dispute <order-id>

Raise a dispute and freeze escrowed payment. Requires --reason and the pairing token. Prompts for confirmation unless --yes or --json.

peaqos scale order dispute ord_63ab7e934300 \
  --reason "Service unavailable after payment" \
  --pairing-token-file ./token.txt \
  --yes

# Optional evidence JSON file
peaqos scale order dispute ord_63ab7e934300 \
  --reason "Incorrect deliverable" \
  --evidence ./evidence.json \
  --pairing-token-file ./token.txt \
  --json

Example output

Dispute raised.

  Order ID:  ord_63ab7e934300
  Status:    disputed
  Payment:   frozen
  Reason:    Service unavailable after payment

Integration tests

Order lifecycle integration tests live at tests/integration/commands/scale/test_order_integration.py. Enable with PEAQOS_CLI_ORCH_INTEGRATION=1 and the PEAQOS_INTEGRATION_* variables documented in that file.

peaqos stream grant

Grant a buyer decryption access to a published chunk chain. Reads chunk envelope files from a publish output directory, unwraps the owner's per-chunk keys, re-wraps them for the buyer, and writes peaq.stream.buyer-access.v1 files. Chunk envelope files are never modified — only new buyer access files are produced.

Prerequisites:

• A publish output directory containing chunk-*.json envelope files (from peaqos stream publish). The encrypted chunk-*.bin blobs and manifest.json are not read by this command.
• Owner X25519 private key file (the key used when the chain was published).
• Buyer X25519 public key (hex) and buyer recipient ID (e.g. did:peaq:<buyer-address>).

Progress and the human summary are written to stderr; --json writes only the summary object to stdout.

Key file format: --owner-private-key-file expects an X25519 private key as a single line of hex — exactly 64 hex characters, with an optional 0x prefix. This is not the secp256k1 0x-prefixed 64-hex format used by read_key_file in Utilities below.

Flags

Flag	Required	Default	Description
--chunk-dir	Yes	—	Directory containing published chunk envelope files (chunk-*.json).
--buyer-public-key	Yes	—	Buyer's X25519 public key (hex).
--buyer-id	Yes	—	Buyer recipient ID (e.g. did:peaq:<buyer-address>).
--owner-private-key-file	Yes	—	Path to file containing the owner's X25519 private key (hex).
--output-dir	Yes	—	Directory to write buyer access files (created if missing).
--max-file-size	No	512000	Maximum buyer access file size in bytes (500 KB).
--json	No	—	Output summary JSON to stdout (no other stdout output).

Output files

Buyer access files use schema peaq.stream.buyer-access.v1. Files are named <buyerPublicKeyHex>-<n>.json with a 1-based index (e.g. a1b2c3d4...-1.json, a1b2c3d4...-2.json). Entries are batched up to --max-file-size (default 500 KB). A single oversized entry gets its own file; entries are never split across files.

Examples

peaqos stream grant \
  --chunk-dir ./publish-output \
  --buyer-public-key a1b2c3d4e5f6789012345678901234567890abcdef1234567890abcdef123456 \
  --buyer-id did:peaq:0xBuyer00000000000000000000000000000001 \
  --owner-private-key-file ./owner-x25519.key \
  --output-dir ./access

Progress and summary on stderr:

Granting access to 4 chunks for buyer did:peaq:0xBuyer00000000000000000000000000000001...

Wrote 1 buyer access file to ./access

  Schema:       peaq.stream.buyer-access.v1
  Buyer ID:     did:peaq:0xBuyer00000000000000000000000000000001
  Chunks:       4
  Files:        1

    a1b2c3d4e5f6789012345678901234567890abcdef1234567890abcdef123456-1.json  (12.3 KB)

# Smaller batch size → more access files
peaqos stream grant \
  --chunk-dir ./publish-output \
  --buyer-public-key a1b2c3d4e5f6789012345678901234567890abcdef1234567890abcdef123456 \
  --buyer-id did:peaq:0xBuyer00000000000000000000000000000001 \
  --owner-private-key-file ./owner-x25519.key \
  --output-dir ./access \
  --max-file-size 1024

# JSON summary to stdout (stderr empty)
peaqos stream grant \
  --chunk-dir ./publish-output \
  --buyer-public-key a1b2c3d4e5f6789012345678901234567890abcdef1234567890abcdef123456 \
  --buyer-id did:peaq:0xBuyer00000000000000000000000000000001 \
  --owner-private-key-file ./owner-x25519.key \
  --output-dir ./access \
  --json

{
  "schemaVersion": "peaq.stream.buyer-access.v1",
  "buyerId": "did:peaq:0xBuyer00000000000000000000000000000001",
  "chunkCount": 4,
  "fileCount": 1,
  "outputDir": "./access",
  "files": [
    {
      "name": "a1b2c3d4e5f6789012345678901234567890abcdef1234567890abcdef123456-1.json",
      "sizeBytes": 12634
    }
  ]
}

Common errors

Condition	Exit code	Message
Wrong owner private key (key_commitment mismatch)	2	Key commitment verification failed — wrong owner key?
No chunk-*.json files in --chunk-dir	1	No chunk files found in {path}
Gap or duplicate chunk indices	1	Missing chunk at index {n} / Duplicate chunk at index {n}
Invalid buyer public key hex	1	Validation error before SDK call
Empty --buyer-id	1	--buyer-id must not be empty.
Output directory not writable	1	Cannot write to: {path}

peaqos stream consume

Decrypt a purchased chunk chain and reassemble the original data. Verifies the chain integrity, decrypts each chunk using the buyer's wrapped key, and writes the reassembled original data to an output file.

Supports two input modes:

• Local directories — provide --chunk-dir, --access-dir, and --data-dir pointing to directories already on disk.
• Remote download — provide --download-url pointing to an HTTP/HTTPS release package. The package is downloaded to a work directory first, then the existing verify → decrypt → reassemble pipeline runs on the downloaded files. The work directory is deleted after successful reassembly unless --keep-files is set.

Prerequisites:

• Buyer X25519 private key file (the key whose public key was used in grant).
• For local mode: chunk directory (chunk-*.json envelopes, optionally manifest.json from peaqos stream publish), encrypted data directory (chunk-*.bin blobs), and buyer access directory (*.json files from peaqos stream grant).
• For remote mode: an HTTP/HTTPS URL to a self-contained release package that bundles everything the pipeline needs — chunk envelopes (chunk-*.json), encrypted data blobs (chunk-*.bin), and buyer access files (*.json) — exposed either as a manifest.json listing those files or as a ZIP archive containing them. This is a self-hosted bundle, distinct from the SDK S3DeliveryChannel pre-signed URL, which delivers only the buyer access files (the ciphertext stays referenced by each chunk's storage_ref). Manifest file names are restricted to flat *.json / *.bin names. A query token on the URL (for a self-hosted endpoint that authorises that way) is preserved when fetching each file — but note an S3 pre-signed single-object URL cannot address the manifest's sub-paths (SigV4 signs the object path, so a changed path returns 403). A pre-signed URL pointing at a single ZIP object still works: the manifest probe returns 403/404 and the command falls back to fetching the signed object as a ZIP.

Roundtrip note (acceptance-criterion deviation). --download-url does not consume the URL produced by peaqos stream distribute / S3DeliveryChannel directly. That pre-signed URL delivers only the first buyer-access file; the chunk envelopes are not delivered and the ciphertext stays referenced by each chunk's storage_ref, and the SDK ships no buyer-side S3 receiver. A complete distribute → consume roundtrip therefore requires SDK/orchestration support (an S3 delivery receiver plus a descriptor enumerating every access file, chunk-envelope location, and a storage_ref resolver) that does not exist yet. Until then, point --download-url at a self-contained bundle as described above.

Progress and the human summary are written to stderr; --json writes only the summary object to stdout.

Flags

Flag	Required	Default	Description
--chunk-dir	Yes (local mode)	—	Directory containing chunk envelope files (chunk-*.json). Not used with --download-url.
--access-dir	Yes (local mode)	—	Directory containing buyer access files (*.json). Not used with --download-url.
--data-dir	Yes (local mode)	—	Directory containing encrypted data blobs (chunk-*.bin). Not used with --download-url.
--buyer-private-key-file	Yes	—	Path to file containing buyer's X25519 private key (hex).
--buyer-id	Yes	—	Buyer recipient ID matching the access files.
--output	Yes	—	Output file path for the reassembled data.
--skip-verify	No	False	Skip chain verification (not recommended, debugging only).
--json	No	False	Output summary JSON to stdout (no other stdout output).
--download-url	No	—	HTTP/HTTPS URL to a release package. Mutually exclusive with --chunk-dir, --access-dir, --data-dir.
--work-dir	No	temp dir	Working directory for downloaded files. Cleaned up after success unless --keep-files. Ignored when --download-url is absent.
--keep-files	No	False	Keep the work directory after successful reassembly. Ignored when --download-url is absent.

Examples

# Local mode — directories already on disk
peaqos stream consume \
  --chunk-dir ./chunks \
  --access-dir ./access \
  --data-dir ./chunks \
  --buyer-private-key-file ./buyer-x25519.key \
  --buyer-id did:peaq:0xBuyer00000000000000000000000000000001 \
  --output ./recovered-data.bin

# Remote download — fetch a self-contained release bundle
peaqos stream consume \
  --download-url "https://bundles.example.com/releases/ord-001/" \
  --buyer-private-key-file ./buyer-x25519.key \
  --buyer-id did:peaq:0xBuyer00000000000000000000000000000001 \
  --output ./recovered-data.bin

# Remote download — keep the downloaded files for inspection
peaqos stream consume \
  --download-url "https://bundles.example.com/releases/ord-001/" \
  --work-dir ./downloaded \
  --keep-files \
  --buyer-private-key-file ./buyer-x25519.key \
  --buyer-id did:peaq:0xBuyer00000000000000000000000000000001 \
  --output ./recovered-data.bin

# Skip verification (debugging only)
peaqos stream consume \
  --chunk-dir ./chunks \
  --access-dir ./access \
  --data-dir ./chunks \
  --buyer-private-key-file ./buyer-x25519.key \
  --buyer-id did:peaq:0xBuyer00000000000000000000000000000001 \
  --output ./recovered-data.bin \
  --skip-verify

# JSON summary to stdout
peaqos stream consume \
  --chunk-dir ./chunks \
  --access-dir ./access \
  --data-dir ./chunks \
  --buyer-private-key-file ./buyer-x25519.key \
  --buyer-id did:peaq:0xBuyer00000000000000000000000000000001 \
  --output ./recovered-data.bin \
  --json

Human output on stderr:

Downloading release package from https://bundles.example.com/releases/ord-001/...
Downloading chunk-0.json...
Downloading chunk-0.bin...
Downloading chunk-1.json...
Downloading chunk-1.bin...
Downloading buyer-access-abc123.json...
Verifying chain... ✓ 4 chunks valid.
Decrypting chunk 0/4...
Decrypting chunk 1/4...
Decrypting chunk 2/4...
Decrypting chunk 3/4...

Reassembled 1048576 bytes to ./recovered-data.bin

  Source Hash:  0xabc123...
  Chunks:       4
  Buyer ID:     did:peaq:0xBuyer00000000000000000000000000000001

JSON output:

{
  "output": "./recovered-data.bin",
  "totalBytes": 1048576,
  "chunkCount": 4,
  "sourceHash": "0xabc123...",
  "buyerId": "did:peaq:0xBuyer00000000000000000000000000000001",
  "verified": true
}

Download behaviour

When --download-url is provided, the command:

1. Creates the work directory (--work-dir if given, otherwise a temp dir).
2. Downloads land in a command-owned, uniquely named peaqos-package-* subdirectory of the work directory, so a pre-existing --work-dir's files (including any prior peaqos-package-* kept via --keep-files) are never touched.
3. Fetches manifest.json from the URL path (a query token is preserved). If the manifest contains a "files" list, each file is downloaded individually with per-file progress on stderr (suppressed under --quiet). The manifest itself is persisted so its sourceHash survives.
4. If manifest.json returns 404 (absent) or 403 (e.g. a pre-signed single object), or has no "files" key, the base URL is downloaded as a ZIP archive and extracted.
5. Downloaded files are sorted (recursively, so a ZIP wrapping the package in a top-level directory works) into chunks/, data/, and access/ subdirectories; manifest.json is co-located with the chunks so its sourceHash is recovered before the pipeline runs.
6. On success, cleanup removes only what the command created: a work directory it created is removed entirely; otherwise only the peaqos-package-* staging subdirectory is removed, and an --output inside it is preserved. --keep-files skips cleanup; a cleanup failure is reported as a warning.
7. On any error, the work directory is preserved for debugging.

Common errors

Condition	Exit code	Message
Chain verification failed	2	Chain verification failed at chunk {n}: {reason}
Missing encrypted data for a chunk	2	Missing encrypted data for chunk {n}
No buyer access for a chunk	2	No buyer access for chunk {n} ({chunk_id})
Wrong buyer private key	2	Decryption failed for chunk {n} — access not granted for this buyer private key
key_commitment mismatch	2	Key commitment verification failed for chunk {n}
plaintext_hash mismatch	2	Data integrity check failed for chunk {n} — plaintext hash mismatch
Download HTTP error	2	Download failed: HTTP {code} from {url}
Download timeout	2	Download failed: connection timed out after 60s
Downloaded archive not a valid ZIP	2	Downloaded archive is not a valid ZIP file: {detail}
No chunk files in dir	1	No chunk files found in {path}
No encrypted data files	1	No encrypted data files found in {path}
No buyer access files	1	No buyer access files found in {path}
--download-url with a dir flag	1	--download-url is mutually exclusive with --chunk-dir, --access-dir, and --data-dir.
Invalid --download-url scheme	1	--download-url must start with http:// or https://.
Missing --chunk-dir (local mode)	1	--chunk-dir is required when --download-url is not provided.
Empty --buyer-id	1	--buyer-id must not be empty.
Output path not writable	1	Cannot write to: {path}

peaqos stream pay

Transfer tokens on-chain to a seller and optionally submit the transaction hash as payment proof. Supports native token and ERC-20/SPL contract transfers on peaq, Base, and Solana.

When --confirmation-url is provided, proof is submitted immediately after the transfer. If omitted, only the transfer executes and a peaqos stream payproof hint is printed so proof can be submitted separately.

Progress lines are written to stderr; the transfer summary and --json payload go to stdout. The transaction hash is always written to stdout before the proof step, so it is captured even if proof submission fails.

Flags

Flag	Required	Default	Description
--seller-address	Yes	—	Recipient address (EVM 0x... or Solana base58).
--amount	Yes	—	Human-readable transfer amount (e.g. "10.5").
--chain	Yes	—	Target chain: peaq, base, or solana.
--order-id	Yes	—	Order ID for the purchase.
--confirmation-url	No	—	URL to submit payment proof after transfer. Omit to transfer only.
--token-address	No	—	ERC-20 contract (EVM) or SPL mint address (Solana). Omit for native token.
--token-decimals	No	—	Token decimal count override (for tokens not in the well-known registry).
--rpc-url	No	—	RPC endpoint. Required for --chain base and --chain solana.
--private-key-file	No	from config	Path to buyer private key file (0x-prefixed hex). Falls back to PEAQOS_PRIVATE_KEY.
--json	No	False	Output result as JSON to stdout.

Examples

# Native PEAQ transfer (no proof)
peaqos stream pay \
  --seller-address 0xSeller...1234 \
  --amount 10.5 \
  --chain peaq \
  --order-id order-001

# Base EVM transfer with proof submission
peaqos stream pay \
  --seller-address 0xSeller...1234 \
  --amount 1.0 \
  --chain base \
  --order-id order-002 \
  --rpc-url https://mainnet.base.org \
  --token-address 0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913 \
  --confirmation-url https://api.example.com/payments/proof

# Solana SPL transfer
peaqos stream pay \
  --seller-address So111...base58 \
  --amount 5.0 \
  --chain solana \
  --order-id order-003 \
  --rpc-url https://api.mainnet-beta.solana.com \
  --token-address EPjFWdd5AufqSSqeM2qN1xzybapC8G4wEGGkZwyTDt1v

# JSON output with proof
peaqos stream pay \
  --seller-address 0xSeller...1234 \
  --amount 10.5 \
  --chain peaq \
  --order-id order-001 \
  --confirmation-url https://api.example.com/payments/proof \
  --json

Human output (with --confirmation-url):

Transferring 10.5 on peaq to 0xSeller...1234...

  Tx Hash:     0xabc123...
  Chain:       peaq
  Status:      submitted

  Proof:       accepted
  Order ID:    order-001
  Submitted:   2026-06-25T12:00:05Z

Human output (without --confirmation-url):

Transferring 10.5 on peaq to 0xSeller...1234...

  Tx Hash:     0xabc123...
  Chain:       peaq
  Status:      submitted

  Submit proof manually: peaqos stream payproof --tx-hash 0xabc123... --order-id order-001 --confirmation-url <url>

JSON output:

{
  "txHash": "0xabc123...",
  "chain": "peaq",
  "status": "submitted",
  "payerAddress": "0xPayer...5678",
  "payeeAddress": "0xSeller...1234",
  "amount": "10.5",
  "token": "PEAQ",
  "tokenAddress": null,
  "proof": {
    "accepted": true,
    "orderId": "order-001",
    "submittedAt": "2026-06-25T12:00:05Z"
  }
}

"proof" is null when --confirmation-url is omitted.

Error codes

Condition	Exit	Message
Invalid or empty --amount	1	Validation message
Empty --seller-address or --order-id	1	Validation message
Missing Solana dependency	1	Install instructions (pip install peaq-os-sdk[solana])
Signing failure	1	Sanitized message (no key material)
Insufficient balance	2	Insufficient balance for transfer
Transaction reverted	2	Transaction reverted: {reason}
Proof HTTP failure	2	Payment proof submission failed: {reason}
Missing env vars / config	3	Actionable config message

peaqos stream payproof

Submit a payment proof for a completed on-chain transfer. Use this when the transfer was done outside of peaqos stream pay, or when the proof step from that command failed and needs to be retried.

Progress is written to stderr; the proof result and --json payload go to stdout.

Flags

Flag	Required	Default	Description
--tx-hash	Yes	—	EVM transaction hash (0x...) or Solana transaction signature.
--order-id	Yes	—	Order ID associated with the payment.
--confirmation-url	Yes	—	URL to submit the payment proof to.
--chain	Yes	—	Chain the transfer was on: peaq, base, or solana.
--payer-address	Yes	—	Buyer wallet address that signed the transfer.
--payee-address	Yes	—	Seller wallet address that received the transfer.
--amount	Yes	—	Human-readable amount transferred (must match the original transfer).
--token	No	—	Token symbol metadata (e.g. USDC).
--token-address	No	—	Token contract or SPL mint address. Omit for native transfers.
--json	No	False	Output result as JSON to stdout.

Examples

# Submit proof for a previously completed transfer
peaqos stream payproof \
  --tx-hash 0xabc123... \
  --order-id order-001 \
  --confirmation-url https://api.example.com/payments/proof \
  --chain peaq \
  --payer-address 0xPayer...5678 \
  --payee-address 0xSeller...1234 \
  --amount 10.5

# ERC-20 transfer proof (Base USDC)
peaqos stream payproof \
  --tx-hash 0xdef456... \
  --order-id order-002 \
  --confirmation-url https://api.example.com/payments/proof \
  --chain base \
  --payer-address 0xPayer...5678 \
  --payee-address 0xSeller...1234 \
  --amount 1.0 \
  --token USDC \
  --token-address 0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913

# JSON output
peaqos stream payproof \
  --tx-hash 0xabc123... \
  --order-id order-001 \
  --confirmation-url https://api.example.com/payments/proof \
  --chain peaq \
  --payer-address 0xPayer...5678 \
  --payee-address 0xSeller...1234 \
  --amount 10.5 \
  --json

Human output:

Submitting payment proof...

  Proof:       accepted
  Order ID:    order-001
  Submitted:   2026-06-25T12:00:05Z

JSON output:

{
  "accepted": true,
  "orderId": "order-001",
  "submittedAt": "2026-06-25T12:00:05Z"
}

Error codes

Condition	Exit	Message
Empty --tx-hash or --order-id	1	Validation message
Proof HTTP failure	2	Payment proof submission failed: {reason}
Missing env vars / config	3	Actionable config message

peaqos stream distribute

Listen for buyer payment confirmation and deliver buyer access files. After publishing a chunk chain, the seller runs this command to wait for a buyer's payment to be confirmed, then automatically generates buyer access files and delivers them to S3.

The command polls --confirmation-url every --poll-interval seconds until the endpoint reports a confirmed payment or --timeout seconds elapse. On confirmation the SDK builds buyer access files (the same as peaqos stream grant), uploads them to the S3 path under {prefix}{buyer_id}/, and returns a pre-signed download URL.

Prerequisites:

• A published chunk directory containing chunk-*.json envelope files (from peaqos stream publish).
• Owner X25519 private key file (the same key used at publish time).
• A reachable HTTP endpoint at --confirmation-url that returns a JSON body containing at minimum status, buyer_id, and buyer_public_key_hex.
• AWS S3 credentials in PEAQOS_S3_ACCESS_KEY_ID / PEAQOS_S3_SECRET_ACCESS_KEY (or the standard boto3 credential chain) when --delivery s3.
• boto3 installed (pip install peaq-os-cli[s3]).

Progress lines are written to stderr; the human summary is written to stdout. --json writes only the result object to stdout.

Key file format: --owner-private-key-file expects an X25519 private key as a single line of hex — exactly 64 hex characters, with an optional 0x prefix. This is the same format accepted by peaqos stream grant.

Flags

Flag	Required	Default	Description
--chunk-dir	Yes	—	Directory containing published chunk envelope files (chunk-*.json).
--owner-private-key-file	Yes	—	Path to file containing the owner's X25519 private key (hex).
--confirmation-url	Yes	—	HTTP endpoint to poll for payment confirmation.
--order-id	Yes	—	Purchase order identifier (purchaseId in the orchestration API).
--poll-interval	No	30	Seconds between confirmation polls.
--timeout	No	3600	Max seconds to wait for confirmation before giving up.
--delivery	Yes	—	Delivery channel. Currently only s3.
--s3	Conditional	—	S3 bucket path (e.g. s3://my-bucket/prefix/). Required when --delivery s3.
--s3-region	No	from env	S3 region (overrides PEAQOS_S3_REGION).
--s3-endpoint	No	from env	Custom S3-compatible endpoint URL (MinIO, R2, etc.).
--presign-expiry	No	3600	Pre-signed download URL expiry in seconds.
--max-file-size	No	512000	Maximum buyer access file size in bytes (500 KB).
--json	No	—	Output result as JSON to stdout (no other stdout output).

Examples

# Basic — poll every 30 seconds, 1-hour timeout
peaqos stream distribute \
  --chunk-dir ./publish-output \
  --owner-private-key-file ./owner-x25519.key \
  --confirmation-url https://api.example.com/orders/ord-001/status \
  --order-id ord-001 \
  --delivery s3 \
  --s3 s3://my-bucket/distributes/

# Faster polling with a shorter timeout
peaqos stream distribute \
  --chunk-dir ./publish-output \
  --owner-private-key-file ./owner-x25519.key \
  --confirmation-url https://api.example.com/orders/ord-001/status \
  --order-id ord-001 \
  --delivery s3 \
  --s3 s3://my-bucket/distributes/ \
  --poll-interval 10 \
  --timeout 300

# Longer-lived download links (24 hours)
peaqos stream distribute \
  --chunk-dir ./publish-output \
  --owner-private-key-file ./owner-x25519.key \
  --confirmation-url https://api.example.com/orders/ord-001/status \
  --order-id ord-001 \
  --delivery s3 \
  --s3 s3://my-bucket/distributes/ \
  --presign-expiry 86400

# JSON output to stdout
peaqos stream distribute \
  --chunk-dir ./publish-output \
  --owner-private-key-file ./owner-x25519.key \
  --confirmation-url https://api.example.com/orders/ord-001/status \
  --order-id ord-001 \
  --delivery s3 \
  --s3 s3://my-bucket/distributes/ \
  --json

Progress on stderr, summary on stdout:

Waiting for payment confirmation (polling every 30s)...
Payment confirmed for buyer did:peaq:0xBuyer00000000000000000000000000000001 (tx: 0xabc...)

Distributing 4 chunks to s3://my-bucket/distributes/

  Buyer ID:      did:peaq:0xBuyer00000000000000000000000000000001
  Access Files:  1
  Download URL:  https://my-bucket.s3.amazonaws.com/distributes/did:peaq:0xBuyer.../access-1.json?X-Amz-Signature=...
  Expires:       3600s

JSON output:

{
  "order_id": "ord-001",
  "buyer_id": "did:peaq:0xBuyer00000000000000000000000000000001",
  "tx_hash": "0xabc...",
  "chunks_distributed": 4,
  "access_files_count": 1,
  "delivery": {
    "channel": "s3",
    "download_url": "https://my-bucket.s3.amazonaws.com/distributes/...?X-Amz-Signature=...",
    "delivered_at": "2026-06-25T12:00:00Z",
    "presign_expiry": 3600
  }
}

Common errors

Condition	Exit code	Message
Payment confirmation timed out	2	Payment confirmation timed out after {N}s for order {order_id}
S3 upload failed	2	S3 upload failed: {reason}
--delivery s3 without --s3	1	--s3 is required when --delivery is s3
--poll-interval not positive	1	--poll-interval must be a positive integer.
--timeout not positive	1	--timeout must be a positive integer.
Non-confirmed payment status from SDK	1	payment.status — ... (constraint: confirmed)
No chunk-*.json files in --chunk-dir	1	No chunk files found in {path}
Missing or unreadable owner key file	1	Could not read key file: {path} (...)
boto3 not installed	3	boto3 is required for S3 delivery but is not installed — install with: pip install boto3

Errors

The CLI maps SDK and network exceptions to stable exit codes:

Exit code	Meaning
0	Success
1	User / validation error (bad input, cap, rate limit)
2	Network, RPC, or on-chain error (connection, HTTP, revert)
3	Configuration error (missing env vars, invalid private key)

Subcommands funnel exceptions through peaq_os_cli.errors.handle_sdk_error, which raises click.ClickException with the mapped exit code and a user-friendly message. Known on-chain revert reasons and Faucet API error codes are translated by map_revert_reason and map_faucet_error.

Output formatting

Subcommands render results through peaq_os_cli.formatting to keep human output consistent across the CLI:

• truncate_address — shortens a hex address to 0x{first4}...{last4}.
• format_timestamp — renders a Unix timestamp as ISO 8601 UTC, or — for None.
• format_key_value — aligns key: value pairs so the colons line up.
• format_table — left-aligned columnar table with a header separator.
• print_json — writes json.dumps(data, indent=2) to stdout for pipe-friendly output.
• print_step — writes [{step}/{total}] {label} progress lines to stderr, suppressed when the active Click context is quiet.

Utilities

Input parsing and validation helpers in peaq_os_cli.utils:

• parse_timestamp — accepts pure-digit Unix seconds or ISO 8601 strings with an explicit UTC offset (...Z or ...+HH:MM). Raises click.BadParameter on unrecognised input.
• validate_did_format — requires did:peaq:0x followed by 40 hex characters.
• validate_address_format — requires a 0x-prefixed 40-hex-character address.
• read_key_file — reads, strips, and validates a 0x-prefixed 64-hex private key file. Raises click.ClickException with exit code 1 on missing files or invalid content.