Skip to main content

A Photo Booth application in pure Python for the Raspberry Pi.

Project description


The pibooth project attempts to provide a Photo Booth application out-of-the-box for Raspberry Pi.


The requirements listed below are the one used for the development of pibooth, but other configuration may work fine. All hardware buttons and lights are optional.


  • 1 Raspberry Pi Model B+

  • 1 Camera (Pi Camera v2.1 8 MP 1080p or any camera compatible with gphoto2)

  • 2 push buttons

  • 2 LED

  • 2 resistor of 100 Ohm


  • Python 3.5.3

  • RPi.GPIO 0.6.3

  • picamera 1.13

  • Pillow 4.0.0

  • pygame 1.9.3

  • gphoto2 1.8.0 ( libgphoto2 2.5.15 )

  • pycups 1.9.73 ( CUPS 2.2.1 )


A brief description on how to set-up a Raspberry Pi to use this software.

  1. Download latest Raspbian image and set-up an SD-card. You can follow these instructions .

  2. Insert the SD-card into the Raspberry Pi and fire it up. Use the raspi-config tool that is shown automatically on the first boot to configure your system (e.g., expand partition, change hostname, password, enable SSH, configure to boot into GUI, etc.).

  3. Reboot and open a terminal. Install the latest firmware version:

    $ sudo rpi-update
  4. Upgrade all installed software:

    $ sudo apt-get update
    $ sudo apt-get upgrade
  5. Optionally install gphoto2 (required only for external camera):

    $ sudo wget
    $ sudo chmod 755
    $ sudo ./
  6. Optionally install CUPS to handle printers (more instruction to add a new printer can be found here):

    $ sudo apt-get install cups libcups2-dev
  7. Install pibooth from the pypi repository:

    $ sudo pip install pibooth


Start the Photo Booth application using the command:

$ pibooth

After the graphical interface is started, the following actions are available:


Keyboard key

Physical button

Toggle Full screen

Ctrl + F


Choose pictures


Button 1

Take pictures


Button 1

Export Printer/Cloud

Ctrl + E

Button 2




All pictures taken are stored in a subfolder of the one defined in the configuration, named YYYY-mm-dd hh-mm-ss which the time when first photo of the sequence was taken.


At the first run, a configuration file is generated in ~/.config/pibooth/pibooth.cfg which permits to configure the behavior of the application. The configuration can be easily edited using the command:

$ pibooth --config

The default configuration can be restored with the command:

$ pibooth --reset

Below is the default configuration file:

# User interface language (fallback to English if not found)
language = en

# Path to save pictures
directory = ~/Pictures/pibooth

# Cleanup the 'directory' before start
clear_on_startup = True

# How long to debounce the button in seconds
debounce_delay = 0.3

# Name of the printer to send the pictures
printer_name = default

# (Width, Height) of the display monitor
size = (800, 480)

# Blinking background when picture is taken
flash = True

# How long is the preview in seconds
preview_delay = 3

# Show a countdown timer during the preview
preview_countdown = True

# How many pictures to take by default (4 max)
captures = 4

# First text displayed
footer_text1 = Footer 1

# Second text displayed
footer_text2 = Footer 2

# Footer text RGB color
text_color = (0, 0, 0)

# Background RGB color
bg_color = (255, 255, 255)

# Resolution for camera captures (see picamera modes)
resolution = (1920, 1080)

# Adjust for lighting issues (normal is 100 or 200. Dark is 800 max)
iso = 100

# Rotation of the camera (valid values are 0, 90, 180, and 270)
rotation = 0

Circuit diagram

Electronic sketch


Icons from the Noun Project

  • Thumb up by Symbolon

  • Polaroid by icon 54

  • Cat by Внталий Плут

Project details

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distributions

No source distribution files available for this release.See tutorial on generating distribution archives.

Built Distribution

pibooth-0.0.5-py2.py3-none-any.whl (654.4 kB view hashes)

Uploaded Python 2 Python 3

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page