picodev 0.1.6

Raspberry Pi Pico development helper for installing Pico SDK and ARM GCC toolchain.

picodev

picodev is a Python CLI package for Raspberry Pi Pico development. It installs the Pico SDK and ARM GCC toolchain for the current operating system, creates Pico C/C++ projects, and runs build/flash commands from picodev.toml.

Install

pip install picodev

For local development from this repository:

pip install -e .

Commands

picodev doctor
picodev install
picodev new blink
picodev new hello-world
cd blink
picodev build
picodev flash

picodev install downloads the Pico SDK and ARM GCC toolchain. The installer selects the correct toolchain for:

• Linux x64
• Linux arm64
• macOS x64
• macOS arm64
• Windows x64

The default install location is ~/.devlab. Set DEVLAB_HOME to use a different directory.

picodev build and picodev flash automatically run with the installed Pico SDK and ARM GCC toolchain environment. You do not need to manually configure paths. picodev doctor checks the tools required by the current platform.

The installed tree layout:

~/.devlab/toolchains/pico-sdk-2.0.0/
  pico-sdk/
~/.devlab/toolchains/arm-none-eabi-gcc-13.2.1/
  bin/
  arm-none-eabi/

Pico SDK and Toolchain Sources

Pico SDK: https://github.com/raspberrypi/pico-sdk

ARM GCC: https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads

Downloaded archives are verified with SHA-256 digests.

Project Format

picodev new blink creates a Pico project:

blink/
  picodev.toml
  CMakeLists.txt
  pico_sdk_import.cmake
  main.c
  .gitignore

Use --board pico_w to create a Pico W project:

picodev new my-project --board pico_w

Default picodev.toml:

[pico]
board = "pico"

[build]
name = "blink"
build_dir = "build"
sources = ["main.c"]

Build Flow

picodev build uses CMake to compile your Pico project:

1. Configures CMake with Pico SDK path
2. Builds the project with ARM GCC toolchain
3. Generates .uf2 file for flashing

Example:

cd blink
picodev build

Output will be in build/blink.uf2.

Flashing

picodev flash programs the ELF firmware over SWD using pyOCD:

1. Connect a CMSIS-DAP compatible debug probe to the Pico SWD pins
2. Connect the probe over USB
3. Run picodev flash

The command selects rp2040 for Pico/Pico W and rp2350 for Pico 2, then programs build/<project>.elf. Use --probe <ID> when multiple probes are connected.

picodev flash

To list the debug probes detected by pyOCD:

picodev flash --detect

Supported Boards

• pico - Raspberry Pi Pico (RP2040)
• pico_w - Raspberry Pi Pico W (RP2040 with WiFi)
• pico2 - Raspberry Pi Pico 2 (RP2350)
• pulsar_rp - UNIT Pulsar RP (RP2350; uses the Pico 2 SDK definition)
• dualmcu_rp - UNIT DualMCU RP (RP2040; uses the Pico SDK definition)

For example:

picodev new pulsar-project --board pulsar_rp
picodev new dualmcu-project --board dualmcu_rp

Example Project

Default blink project (main.c):

#include <stdio.h>
#include "pico/stdlib.h"

int main() {
    stdio_init_all();
    
    const uint LED_PIN = 25;
    gpio_init(LED_PIN);
    gpio_set_dir(LED_PIN, GPIO_OUT);

    while (true) {
        gpio_put(LED_PIN, 1);
        sleep_ms(500);
        gpio_put(LED_PIN, 0);
        sleep_ms(500);
    }
}

For Pico W, the LED control uses the CYW43 wireless chip:

#include <stdio.h>
#include "pico/stdlib.h"
#include "pico/cyw43_arch.h"

int main() {
    stdio_init_all();
    
    if (cyw43_arch_init()) {
        printf("Wi-Fi init failed\n");
        return -1;
    }

    while (true) {
        cyw43_arch_gpio_put(CYW43_WL_GPIO_LED_PIN, 1);
        sleep_ms(500);
        cyw43_arch_gpio_put(CYW43_WL_GPIO_LED_PIN, 0);
        sleep_ms(500);
    }
}

Development Workflow

1. Install toolchains:

   picodev install
   

2. Create a project:

   picodev new my-project
   cd my-project
   

3. Edit main.c with your code

4. Build:

   picodev build
   

5. Flash to Pico over SWD:

   picodev flash
   

6. Your code runs immediately after flashing!

Requirements

• Python 3.9+
• CMake 3.20 or newer (install separately)
• Ninja on Windows (installed by picodev install)
• picotool on Windows (installed by picodev install)
• Git (optional, for submodule initialization)

On Ubuntu/Debian:

sudo apt install cmake git

On macOS:

brew install cmake git

On Windows: Download CMake from https://cmake.org/download/

Support

For documentation, bug reports, and feature requests, visit the UNIT-Electronics-Labs/unit_devlab_pico repository. Report problems through GitHub Issues.

License

MIT