pipecat-dotwave

.wave streaming speech-to-text for Pipecat.

WaveSTTService streams your pipeline's audio to the .wave /v1/listen socket, a Deepgram-compatible streaming transcription endpoint, and pushes InterimTranscriptionFrame and TranscriptionFrame frames as results arrive.

Built and maintained by .wave (dotwave.ai).

Installation

uv add pipecat-dotwave

or with pip:

pip install pipecat-dotwave

Prerequisites

Create an API key in the .wave console and export it:

export DOTWAVE_API_KEY=...

Usage

import os

from pipecat.transcriptions.language import Language

from pipecat_dotwave import WaveSTTService

stt = WaveSTTService(
    api_key=os.getenv("DOTWAVE_API_KEY"),
    settings=WaveSTTService.Settings(language=Language.EN_US),
)

pipeline = Pipeline(
    [
        transport.input(),
        vad,  # e.g. VADProcessor(vad_analyzer=SileroVADAnalyzer())
        stt,
        ...,
    ]
)

Put a VAD upstream of the service (a VADProcessor, or the user aggregator's VAD in an agent pipeline). When the VAD reports the end of speech, the service sends Finalize, and the final that answers it is pushed as a finalized TranscriptionFrame.

Each final carries the whole words since the previous final, so successive TranscriptionFrame texts join with one space, which is what Pipecat's user aggregator does. Each interim replaces the previous one.

Constructor parameters

Parameter	Type	Default	Description
api_key	str	required	.wave API key, sent as Authorization: Token <key>.
base_url	str	"api.dotwave.ai"	Bare host, or a URL with a scheme ("ws://localhost:8080").
encoding	str	"linear16"	"linear16", "mulaw" or "alaw". Pipeline audio is converted: linear16 is sent at 16 or 24 kHz (other rates are resampled to 16 kHz), mulaw and alaw at 8 kHz.
sample_rate	int | None	None	Sample rate of the incoming audio; the pipeline's input rate if None.
utterance_end_ms	int | None	None	1000 to 3200. Silence after which the socket ends a segment on its own (a final with speech_final, then UtteranceEnd). If None, segments end on Finalize.
interim_results	bool	True	Receive interim results.
extra_headers	dict[str, str] | None	None	Extra handshake headers.
settings	WaveSTTService.Settings | None	None	Runtime-updatable settings (below).
ttfs_p99_latency	float | None	None	P99 speech-end-to-final latency, in seconds, used by turn strategies. .wave has not measured it for Pipecat, so Pipecat's default applies; measure your deployment with stt-benchmark and pass the result.

Settings

WaveSTTService.Settings fields can be changed at runtime with STTUpdateSettingsFrame; a change reconnects the socket (after the user's turn if they are speaking).

Field	Type	Default	Description
model	str	"nemotron-asr-streaming"	Transcription model.
language	Language | str | None	None	Language to transcribe. None or "multi" selects automatic language detection.
extra	dict	{}	Additional query parameters, sent as given.

A Pipecat Language is sent as the tag the socket expects: regional values pass through (Language.PT_BR as pt-BR, Language.EN_US as en-US), Language.EN is sent as en (English, United States), and a bare code with a single regional variant on .wave is sent as that variant (Language.DE as de-DE). You can also pass a tag string such as "pt-BR". A language .wave does not serve is refused when the socket opens, with an error naming the tags it does serve; see the socket reference for the list.

Results report the language as Deepgram spells it (en-US, pt-BR, de), and the service sets it on each frame as a Pipecat Language. With automatic detection, frames carry no language.

Not supported

diarize, multichannel, channels, keywords and endpointing are not supported by the socket. Passing them to WaveSTTService raises TypeError instead of being ignored, and a parameter the socket refuses through extra is reported as an ErrorFrame.

Errors and reconnection

An Error message from the socket is pushed upstream as an ErrorFrame. A refused key (close code 4401) or a malformed request (4400) is reported as a permanent error and is not retried. Other closes, such as the service restarting (1012) or being temporarily unable to take a new session (4429), reconnect with backoff.

A session closes after 30 seconds without audio, so the service sends a short burst of silence after 20 idle seconds.

Event handlers

Event	Arguments	Description
on_connected	(service)	The socket connected.
on_disconnected	(service)	The socket disconnected.
on_connection_error	(service, error: str)	A connection error occurred.

@stt.event_handler("on_connected")
async def on_connected(service):
    logger.info("Connected to .wave")

Running the example

examples/transcription-dotwave.py prints what you say into your browser's microphone:

git clone https://github.com/dotwave-ai/pipecat-dotwave
cd pipecat-dotwave
uv sync
uv pip install "pipecat-ai[runner,webrtc,silero]"
export DOTWAVE_API_KEY=...
uv run examples/transcription-dotwave.py

Open http://localhost:7860, connect, and talk.

Pricing

Streaming transcription is billed at $0.00045 per minute of audio. See pricing and limits.

Compatibility

	Version
Pipecat	>= 1.12.0
Python	>= 3.11 (Pipecat 1.12.0 requires it)

Tested with Pipecat 1.12.0.

Development

uv venv && uv pip install -e ".[dev]"
uv run pytest
uv run ruff check && uv run ruff format --check

The tests run against a local fake of the socket and need neither a network connection nor an API key.

License

BSD 2-Clause. See LICENSE.

About

Built and maintained by .wave (dotwave.ai). Questions: info@dotwave.ai.

Releasing

Tag a version (git tag v0.1.0 && git push --tags). The publish.yml workflow builds the wheel and sdist with uv build and uploads them to PyPI through a trusted publisher configured for this repository. Without Actions, uv build && uv publish does the same from a machine with a PyPI token.