A community integration for Pipecat

pipecat-effects

pipecat-effects runs an audio effects chain on the output of a pipecat bot. You build the chain from 8 effects, and it adds no latency.

Install

pip install pipecat-effects

Use

Pipecat 1.10.0 has no output filter field. FilterMixer runs the filter as the output mixer. Tested with pipecat 1.14.0.

from pipecat.transports.base_transport import TransportParams
from pipecat_effects import (
    AGC,
    Biquad,
    Compressor,
    DeEsser,
    Effects,
    EffectsFilter,
    FilterMixer,
    Limiter,
    Saturation,
)

CHAIN: Effects = (
    AGC(target_lufs=-20.0),
    Biquad(kind="highpass", hz=90.0),
    Biquad(kind="lowshelf", hz=200.0, gain_db=2.5),
    Biquad(kind="peak", hz=3200.0, q=1.2, gain_db=-2.0),
    DeEsser(hz=6500.0, threshold_db=-32.0, ratio=4.0),
    Compressor(threshold_db=-20.0, ratio=3.0, attack_ms=8.0, release_ms=120.0, makeup_db=2.0),
    Saturation(drive=1.2, mix=0.15),
    Limiter(ceiling_db=-1.0, knee_db=3.0),
)
CHANNELS = 1


def transport_params() -> TransportParams:
    return TransportParams(
        audio_in_enabled=True,
        audio_out_enabled=True,
        audio_out_channels=CHANNELS,
        audio_out_mixer=FilterMixer(EffectsFilter(CHAIN), channels=CHANNELS),
    )

examples/bot.py runs one voice bot with that chain. It needs 4 pipecat extras and OPENAI_API_KEY. The wheel has no examples/, so run it from a clone of this repository.

uv run --with "pipecat-ai[runner,webrtc,openai,silero]" examples/bot.py --chain telephone

--chain picks one of the 4 chains in Listen. --bypass runs the session with the chain off. The log gives the loudness and the true peak of each bot turn.

Listen

One sentence of Cartesia sonic-3.5 speech, 24 kHz mono, run in 40 ms chunks, the stock output chunk of pipecat. examples/chains.py holds each chain. examples/clips.py renders the clips with ffmpeg. GitHub mutes each player at load. Unmute it to listen. On PyPI each player is a link. Loudness is integrated, measured by ffmpeg ebur128.

Unprocessed

https://github.com/user-attachments/assets/9b4a4b80-8168-4380-a12d-b98f9fdcaaa7

No filter. -18.3 LUFS, -1.3 dBTP.

EQ and compression

https://github.com/user-attachments/assets/33bbbafc-3627-416c-84f0-baf398f4922f

The chain in Use: 2.5 dB low shelf at 200 Hz, 2 dB cut at 3.2 kHz, de-esser, 3:1 compressor. -23.2 LUFS, -5.5 dBTP.

Telephone

https://github.com/user-attachments/assets/6fff6b7a-ef53-44a1-b275-5e29ca4ab1bb

300 Hz to 3400 Hz band, 4:1 compressor, drive 3.0 at 0.3 mix. -22.0 LUFS, -5.1 dBTP.

Broadcast

https://github.com/user-attachments/assets/0e336600-fde6-4ddb-8210-bd74be7fe0b4

100 Hz high-pass, de-esser, 4:1 compressor with 0.5 ms attack and 18 dB makeup, +4 dB at 3.5 kHz. -16.3 LUFS, -1.4 dBTP. Against the unprocessed clip: +2.0 LU, and +3.7 dB in the share of power from 2 to 4 kHz.

Room

https://github.com/user-attachments/assets/6cbc794c-5a33-4cb4-a2be-ccfebffe1f79

Schroeder reverb, 400 ms decay, 0.3 mix. -21.2 LUFS, -3.5 dBTP.

Build a chain

• A chain is any sequence of effects. The filter runs them in order and adds no stage.
• Build one filter per session. Each effect holds its state across chunks.
• Put AGC first. It reads the level before any stage changes it.
• If a chain ends without Limiter, the int16 cast hard clips each sample over full scale. End each chain with Limiter.
• Give FilterMixer the audio_out_channels value as channels. start raises over 1 channel.
• Each effect validates its values at build time. A value outside the range raises ValueError that names the field and the range.

Effects

mix sets the dry/wet ratio. 0 gives only the input, the dry signal. 1 gives only the processed signal, the wet signal.

Method of each effect:

Control

Change the chain at runtime with 2 stock frames.

from pipecat.frames.frames import MixerEnableFrame, MixerUpdateSettingsFrame
from pipecat_effects import Gain, Limiter

await worker.queue_frame(MixerEnableFrame(enable=False))
await worker.queue_frame(MixerUpdateSettingsFrame(settings={"effects": (Gain(db=-3.0), Limiter())}))

• MixerEnableFrame(enable=False) bypasses the chain. The filter gives the input, and the chain keeps running on it, so envelopes and delay lines stay current.
• MixerUpdateSettingsFrame with an effects key builds a new chain and swaps it in.
• Each change fades over one chunk, from the output last heard to the new output. If 2 updates arrive before one chunk, the chain last heard fades to the last chain. The chain between them is not heard.
• FilterMixer maps the 2 mixer frames to FilterEnableFrame and FilterUpdateSettingsFrame. Call EffectsFilter.process_frame with those 2 frames when you hold the filter directly.
• An effects value outside a sequence of effects raises TypeError that names the field. An item whose start gives no callable raises TypeError that names the field and the index.
• A chain that fails to build raises ValueError that names the effects field. The old chain keeps running.
• An update before start builds at start. A failed build then raises at start and names the field of the effect, not effects.

Meter

reading = mixer.read()  # Reading(lufs=-19.92, dbtp=-1.04), or None on silence

• FilterMixer meters each chunk it gives to the transport, after the int16 cast.
• FilterMixer.read() gives a Reading with lufs and dbtp since the last read, then clears both. Silence gives None.
• lufs is the K-weighted loudness of ITU-R BS.1770, the loudness standard. The published 48 kHz filter moves to the session rate by the bilinear transform. A 997 Hz sine at 0 dBFS reads -3.01 LUFS.
• dbtp is the true peak, on 4 times oversampling with 48 taps.
• Meter reads float chunks for any other caller. Its read gives the floor, -120.0 dB, in place of None.

Cost

One 40 ms chunk at 24 kHz, the stock output chunk of pipecat. The 8 effect chain above, mean of 1000 chunks, median of 4 runs. Python 3.13.9, macOS arm64.

python examples/bench.py --out rows.jsonl --sha <commit> writes one row.

Limits

Chain

• The filter runs on mono. FilterMixer.start raises on more than 1 channel.
• The chain runs on each chunk, silence included, so attack and release stay continuous through silence. At the stock audio_out_10ms_chunks of 4, one idle session costs 25 silent chunks of 40 ms a second, 7.9 ms of compute a second on the Cost machine.
• A bypassed chain keeps running, so it costs the same as an active chain.
• Outside a bypass, the chunk after an update runs the old chain and the new chain.
• A chunk of 0 samples passes through. An odd byte count raises ValueError that names audio.
• A Biquad or DeEsser centre over 0.45 of the sample rate raises at start, with the highest allowed centre and the rate. The error names hz, not the effect.
• At 8 kHz the highest centre is 3600 Hz. The chain in Use raises there, since its DeEsser sits at 6500 Hz.
• Not included: lookahead, convolution, pitch shift, formant shift. The broadcast clip holds a peak-to-loudness ratio, true peak minus loudness, of 14.9 dB. The unprocessed clip holds 17.0 dB. A hall reverb needs convolution.

Effects

• Compressor and DeEsser set the gain of each 1 ms block from the peak of that block. AGC sets one target per chunk from the loudness at the chunk end. Each gain reads ahead inside its chunk, by up to 1 ms or 1 chunk.
• AGC reads momentary loudness without the gate of BS.1770. Under -50 LUFS the gain holds.
• AGC sets the level at its place in the chain. Later stages move the output level. The EQ and compression clip holds AGC(target_lufs=-20.0) and measures -23.2 LUFS.
• Limiter is a memoryless soft clipper. It has no attack or release, so a signal driven far over the ceiling distorts.
• The -1 dB ceiling leaves the margin for inter-sample peaks at a codec resampler. The true peak meter only reports.
• One section falls 12 dB per octave. A lowpass at 6000 Hz drops an 8 kHz tone by 10.0 dB at a 24 kHz rate.
• Reverb takes decay_ms to 500.

Meter

• The true peak meter cuts at the input Nyquist. At a 24 kHz rate it reads a 10 kHz sine 0.5 dB under its peak.
• The K-weighting at 8 kHz differs from the standard by 0.43 dB at most from 100 Hz to 3 kHz. At 24 kHz it differs by 0.040 dB at most.

Pipecat

• With an output mixer, a flush that fails to drain does not time out. Each mixer chunk reaches the pipeline sink and counts as progress. A flush that drains returns. The defect is in pipecat 1.10.0 and holds for each output mixer.

Develop

• The package ships a py.typed marker. It exports Effect, Apply and Samples for a caller who writes an effect.
• make lint checks the lock, the format, the lint rules, and the types with pyright.
• make test runs the tests. make test-lowest runs them on the lowest allowed pipecat-ai, numpy and scipy. CI runs both.
• make audit checks uv.lock for known vulnerabilities.
• make build builds the wheel and the sdist into dist/. CI runs it on each push to main.
• A v tag that matches the project version publishes the package to PyPI.

License

BSD 2-Clause. Softcery builds and maintains the package.