processforge 0.2.10

A Python-based process simulation framework for chemical engineering applications.

Process Forge

A Python-based process simulation framework for chemical process engineering applications.

Table of Contents

• Features
• Available Unit Operations
• Installation
• Usage
• Flowsheet Configuration
• Quick Start Examples
• Project Structure
• Dependencies
• License

Features

Core Capabilities

• Steady-state EO (equation-oriented) and dynamic process simulations
• Thermodynamic property calculations using CoolProp
• Multiple unit operations for hydraulic and thermal systems
• Flowsheet modeling with automatic recycle stream detection
• Modelica/OMPython bridge: transpile flowsheets to native .mo source and compile to Model Exchange FMU via OpenModelica

Steady-State EO Solver

• All unit equations assembled into a global F(x) = 0 system and solved simultaneously
• Newton-Raphson with Armijo backtracking line search (SciPy backend)
• Pluggable backends: SciPy (built-in), Pyomo + IPOPT (optional), CasADi (optional)
• Recycle loops handled natively — no tear stream initialisation or Wegstein iteration needed
• Recycle streams are auto-detected from the flowsheet graph topology

Dynamic Simulation

• ODE time-marching for Tank-based dynamic flowsheets
• Sequential-modular propagation with Wegstein convergence for recycle loops
• Timeseries results for transient analysis

Results & Visualization

• Export formats: Zarr stores containing both scalar and timeseries results for downstream analysis
• Optional plotting (use --export-images) for temperature profiles and composition charts
• Graphviz flowsheet diagrams (PNG and SVG)
• Timeseries visualization for dynamic simulations

Validation & Quality

• JSON schema validation for flowsheet configurations
• Connectivity checks (inlet sources, unused outlets, unreachable units)
• Comprehensive logging for debugging

Available Unit Operations

Unit Type	Mode	Description	Key Parameters
Pump	Steady-state (EO)	Adds pressure rise with efficiency losses	deltaP, efficiency
Valve	Steady-state (EO)	Isenthalpic pressure reduction	pressure_ratio
Strainer	Steady-state (EO)	Fixed pressure drop element	deltaP
Pipes	Steady-state (EO) & Dynamic	Laminar flow with friction losses	delta_p, diameter
Tank	Dynamic only	Well-mixed molar tank (ODE)	outlet_flow, initial_n, initial_T, P, duty
Flash	Steady-state (EO, SciPy backend)	Isothermal flash separator	P
Heater	Steady-state (EO, SciPy backend)	Temperature control unit	duty, flowrate

Note: Flash and Heater use CoolProp internally and are supported on the SciPy backend only. Pump, Valve, Strainer, and Pipes support all three backends (SciPy, Pyomo, CasADi).

Installation

From PyPI

# pip
pip install processforge

# uv
uv add processforge

With EO solver backends (optional)

# Pyomo + IPOPT backend
pip install "processforge[eo]"
uv add "processforge[eo]"

# Pyomo + IPOPT + CasADi backend
pip install "processforge[eo-casadi]"
uv add "processforge[eo-casadi]"

# Modelica transpiler + OMPython bridge (requires OpenModelica installed separately)
pip install "processforge[modelica]"
uv add "processforge[modelica]"

From source (development)

1. Clone the repository:

   git clone https://github.com/urjanova/processforge.git
   cd processforge
   

2. Install the package:

   pip install -e ".[dev]"
   

   Or using uv:

   uv sync
   

Usage

Command Line Interface

ProcessForge provides a CLI with three subcommands:

# Run a simulation (add --export-images to generate PNG plots)
processforge run flowsheets/closed-loop-chain.json [--export-images]

# Validate a flowsheet configuration
processforge validate flowsheets/closed-loop-chain.json

# Generate a flowsheet diagram
processforge diagram flowsheets/closed-loop-chain.json
processforge diagram flowsheets/closed-loop-chain.json --format svg --output-dir diagrams/

# Export flowsheet as Modelica .mo and compile to Model Exchange FMU via OMPython
processforge export-modelica flowsheets/my-flowsheet.json
processforge export-modelica flowsheets/my-flowsheet.json --output-dir modelica/ --no-compile

Running a simulation generates output files in the outputs/ directory:

• *_results.zarr - Simulation results stored as a Zarr directory
• *_validation.xlsx - Validation report derived directly from the Zarr store
• PNG plots for temperatures and compositions when --export-images is supplied

As a Python Module

from processforge import EOFlowsheet, validate_flowsheet

# Load and validate a flowsheet
config = validate_flowsheet("flowsheets/my-flowsheet.json")

# Run steady-state EO simulation (default SciPy backend)
fs = EOFlowsheet(config, backend="scipy")
results = fs.run()
# results: {stream_name: {"T": ..., "P": ..., "flowrate": ..., "z": {...}}}

# Use Pyomo + IPOPT backend (requires: pip install "processforge[eo]")
fs = EOFlowsheet(config, backend="pyomo")
results = fs.run()

# Use CasADi backend (requires: pip install "processforge[eo-casadi]")
fs = EOFlowsheet(config, backend="casadi")
results = fs.run()

Flowsheet Configuration

Flowsheets are defined as JSON files. The simulation.mode field controls which solver is used:

mode	Solver	Use case
"steady" (default)	EO — global Newton-Raphson	Steady-state without Tank units
"dynamic"	SM — ODE time-marching	Flowsheets containing Tank units

{
  "metadata": { "name": "My Flowsheet", "version": "2.0" },
  "streams": {
    "feed": { "T": 298.15, "P": 101325, "flowrate": 1.0, "z": { "Water": 0.8, "Toluene": 0.2 } }
  },
  "units": {
    "pump_1": { "type": "Pump", "in": "feed", "out": "after_pump", "deltaP": 200000, "efficiency": 0.75 },
    "valve_1": { "type": "Valve", "in": "after_pump", "out": "product", "pressure_ratio": 0.5 }
  },
  "simulation": {
    "mode": "steady",
    "backend": "scipy"
  }
}

The optional backend key selects the EO solver backend ("scipy", "pyomo", or "casadi"). Defaults to "scipy".

Recycle streams

Recycle streams require no special configuration. Any stream produced as the out of one unit can be used as the in of any other unit — including upstream units. The EO solver resolves the full coupled system simultaneously.

"units": {
  "tank_1": { "type": "Tank", "in": ["feed", "recycle"], "out": "after_tank", ... },
  "pipe_1": { "in": "after_tank", "out": "recycle", ... }
}

Quick Start Examples

Run a steady-state simulation

processforge run flowsheets/hydraulic-chain.json

Run a dynamic simulation

processforge run flowsheets/closed-loop-chain.json

Validate a flowsheet

processforge validate flowsheets/closed-loop-chain.json

Generate a flowsheet diagram

processforge diagram flowsheets/closed-loop-chain.json

Project Structure

processforge/
├── src/processforge/              # Core package
│   ├── __init__.py               # Public API
│   ├── flowsheet.py              # Sequential-modular solver (dynamic mode)
│   ├── thermo.py                 # Thermodynamic calculations via CoolProp
│   ├── result.py                 # Results export (Zarr, Excel, plotting)
│   ├── simulate.py               # CLI entry point with subcommands
│   ├── solver.py                 # ODE solver interface (dynamic)
│   ├── validate.py               # Simple schema validation
│   ├── _schema.py                # Schema loader (importlib.resources)
│   ├── eo/                       # Equation-oriented (EO) steady-state solver
│   │   ├── flowsheet.py          # EOFlowsheet — build, warm-start, solve
│   │   ├── solver.py             # EOSolver — backend selector
│   │   ├── jacobian.py           # GlobalJacobianManager — F(x), J(x)
│   │   ├── stream_var.py         # StreamVar — per-stream variable container
│   │   ├── mixin.py              # EOUnitModelMixin — unit residual interface
│   │   ├── backends/             # Pluggable solver backends
│   │   │   ├── scipy_backend.py  # Newton-Raphson + Armijo (built-in)
│   │   │   ├── pyomo_backend.py  # Pyomo ConcreteModel + IPOPT (optional)
│   │   │   └── casadi_backend.py # CasADi SX + rootfinder (optional)
│   │   └── units/                # EO residual equations per unit type
│   │       ├── pump_eo.py
│   │       ├── valve_eo.py
│   │       ├── strainer_eo.py
│   │       ├── pipes_eo.py
│   │       ├── heater_eo.py
│   │       └── flash_eo.py
│   ├── units/                    # Unit operation implementations
│   │   ├── pump.py               # Pump with efficiency
│   │   ├── valve.py              # Pressure-reducing valve
│   │   ├── strainer.py           # Pressure drop element
│   │   ├── pipes.py              # Pipe with friction losses
│   │   ├── tank.py               # Well-mixed tank (dynamic ODE)
│   │   ├── flash.py              # Isothermal flash separator
│   │   └── heater.py             # Temperature control heater
│   ├── modelica/                 # OMPython bridge: .mo transpiler + omc runner
│   │   ├── transpiler.py         # transpile() — config → Modelica source
│   │   ├── mo_writer.py          # build_model_source() — string builder
│   │   ├── unit_equations.py     # Per-unit equation generators
│   │   └── omc_runner.py         # compile_modelica() — OMPython validate + FMU
│   ├── utils/                    # Utilities
│   │   ├── validate_flowsheet.py # Schema + connectivity validation
│   │   └── flowsheet_diagram.py  # Graphviz visualization
│   └── schemas/                  # Bundled JSON schemas
│       └── flowsheet_schema.json
├── flowsheets/                    # Example flowsheet configurations
│   ├── closed-loop-chain.json    # Dynamic recycle example
│   └── archive/                  # Additional examples
├── pyproject.toml                # Project configuration
└── MANIFEST.in                   # Source distribution manifest

Dependencies

Core dependencies (always installed):

• numpy - Numerical computing
• scipy - Scientific computing, ODE solvers, sparse linear algebra
• coolprop - Thermodynamic property calculations
• matplotlib - Plotting and visualization
• loguru - Logging
• jsonschema - Configuration validation
• graphviz - Flowsheet diagram generation
• pandas - Data manipulation
• openpyxl - Excel report generation
• zarr - Chunked storage for simulation outputs

Optional EO solver backends:

• pyomo ≥ 6.7 — Pyomo + IPOPT backend (pip install "processforge[eo]")
• casadi ≥ 3.6 — CasADi AD-based backend (pip install "processforge[eo-casadi]")
• OMPython ≥ 1.4 — Python API to OpenModelica compiler (pip install "processforge[modelica]"). Requires OpenModelica installed on the system.

Logo credit

Google Gemini / Nano Banana

License

This project is licensed under the BSD 3-Clause License. See the LICENSE file for details.

For licensing inquiries, please contact the development team.