prom433

Exposes Prometheus metrics based on data received by rtl_433.

To use this you need to also be running rtl_433 and an MQTT broker. Configure rtl_433 to report its messages to MQTT (by running rtl_433 -F mqtt://mqttbroker:1883) and then point prom433 to the same broker (prom433 --mqtt mqtt://mqttbroker:1883)

You may find it useful to pass -M level to rtl_433, which will add frequency and signal strength details to the messages received. These will be exposed as additional metrics.

usage: prom433 [-h] [-q] [--bind [BIND]] [--mqtt [MQTT]] [--drop-after [DROP_AFTER]]

Listens to messages from rtl_433 and exposes them as prometheus metrics

options:
  -h, --help            show this help message and exit
  -q, --quiet           don't log HTTP requests
  --bind [BIND]         the ip address and port to bind to. Default: *:9100
  --mqtt [MQTT]         the mqtt host to connect to. Default: mqtt:1883
  --drop-after [DROP_AFTER]
                        drop metrics this many seconds after the device was last seen. 0 disables
                        dropping metrics

By default the metrics are exposed on port 9100 (configure using --bind). To scrape the metrics with Prometheus, add the following to your promethus.cfg file.

scrape_configs:
  - job_name: 'prom433'
    static_configs:
      - targets: ['hostname:9100']

What metrics are exposed depends on what devices are detected by rtl_433. Below is an example of the metrics that could be exposed. If you have other devices, please free to raise an issue so we can add more supported device types.

#HELP prom433_battery_ok The battery status.
#TYPE prom433_battery_ok gauge 
prom433_battery_ok{id="250", model="Fineoffset-WHx080"} 1.000000
prom433_battery_ok{channel="3", id="91", model="Nexus-TH"} 1.000000
prom433_battery_ok{channel="6", id="3672", model="Eurochron-EFTH800"} 1.000000
prom433_battery_ok{channel="4", id="1864", model="Eurochron-EFTH800"} 1.000000
prom433_battery_ok{channel="1", id="146", model="Nexus-TH"} 0.000000
prom433_battery_ok{channel="2", id="480", model="Eurochron-EFTH800"} 1.000000
prom433_battery_ok{channel="5", id="2492", model="Eurochron-EFTH800"} 1.000000
prom433_battery_ok{channel="E", id="11922", model="Acurite-3n1"} 0.000000
#HELP prom433_freq The frequency the last message was received on.
#TYPE prom433_freq guage 
prom433_freq{id="250", model="Fineoffset-WHx080"} 433.936990
prom433_freq{channel="3", id="91", model="Nexus-TH"} 433.936990
prom433_freq{channel="6", id="3672", model="Eurochron-EFTH800"} 433.929380
prom433_freq{channel="4", id="1864", model="Eurochron-EFTH800"} 433.929090
prom433_freq{channel="1", id="146", model="Nexus-TH"} 434.127870
prom433_freq{channel="2", id="480", model="Eurochron-EFTH800"} 433.926750
prom433_freq{channel="5", id="2492", model="Eurochron-EFTH800"} 433.925700
prom433_freq{id="225212", model="Akhan-100F14"} 434.023230
prom433_freq{channel="E", id="11922", model="Acurite-3n1"} 433.929090
#HELP prom433_humidity The humidity in %.
#TYPE prom433_humidity gauge 
prom433_humidity{id="250", model="Fineoffset-WHx080"} 61.000000
prom433_humidity{channel="3", id="91", model="Nexus-TH"} 53.000000
prom433_humidity{channel="6", id="3672", model="Eurochron-EFTH800"} 60.000000
prom433_humidity{channel="4", id="1864", model="Eurochron-EFTH800"} 60.000000
prom433_humidity{channel="1", id="146", model="Nexus-TH"} 55.000000
prom433_humidity{channel="2", id="480", model="Eurochron-EFTH800"} 61.000000
prom433_humidity{channel="5", id="2492", model="Eurochron-EFTH800"} 60.000000
prom433_humidity{channel="E", id="11922", model="Acurite-3n1"} 52.000000
#HELP prom433_last_message The time the last message was received.
#TYPE prom433_last_message counter 
prom433_last_message{id="250", model="Fineoffset-WHx080"} 1668007594.000000
prom433_last_message{channel="3", id="91", model="Nexus-TH"} 1668007594.000000
prom433_last_message{channel="6", id="3672", model="Eurochron-EFTH800"} 1668007521.000000
prom433_last_message{channel="4", id="1864", model="Eurochron-EFTH800"} 1668007563.000000
prom433_last_message{channel="1", id="146", model="Nexus-TH"} 1668007581.000000
prom433_last_message{channel="2", id="480", model="Eurochron-EFTH800"} 1668007586.000000
prom433_last_message{channel="5", id="2492", model="Eurochron-EFTH800"} 1668007306.000000
prom433_last_message{id="225212", model="Akhan-100F14"} 1668001774.000000
prom433_last_message{channel="E", id="11922", model="Acurite-3n1"} 1668007563.000000
#HELP prom433_noise The noise level of the last message.
#TYPE prom433_noise guage 
prom433_noise{id="250", model="Fineoffset-WHx080"} -18.526900
prom433_noise{channel="3", id="91", model="Nexus-TH"} -18.526900
prom433_noise{channel="6", id="3672", model="Eurochron-EFTH800"} -18.564800
prom433_noise{channel="4", id="1864", model="Eurochron-EFTH800"} -19.449100
prom433_noise{channel="1", id="146", model="Nexus-TH"} -18.720000
prom433_noise{channel="2", id="480", model="Eurochron-EFTH800"} -18.526900
prom433_noise{channel="5", id="2492", model="Eurochron-EFTH800"} -18.360200
prom433_noise{id="225212", model="Akhan-100F14"} -14.399000
prom433_noise{channel="E", id="11922", model="Acurite-3n1"} -19.449100
#HELP prom433_rain The total rainfall in mm.
#TYPE prom433_rain counter 
prom433_rain{id="250", model="Fineoffset-WHx080"} 863.700010
#HELP prom433_rssi The RSSI of the last message.
#TYPE prom433_rssi guage 
prom433_rssi{id="250", model="Fineoffset-WHx080"} -0.112511
prom433_rssi{channel="3", id="91", model="Nexus-TH"} -0.112511
prom433_rssi{channel="6", id="3672", model="Eurochron-EFTH800"} -0.186035
prom433_rssi{channel="4", id="1864", model="Eurochron-EFTH800"} -0.117409
prom433_rssi{channel="1", id="146", model="Nexus-TH"} -1.056520
prom433_rssi{channel="2", id="480", model="Eurochron-EFTH800"} -0.126133
prom433_rssi{channel="5", id="2492", model="Eurochron-EFTH800"} -0.143085
prom433_rssi{id="225212", model="Akhan-100F14"} -6.768530
prom433_rssi{channel="E", id="11922", model="Acurite-3n1"} -0.117409
#HELP prom433_snr The Signal to noise ratio of the last message.
#TYPE prom433_snr guage 
prom433_snr{id="250", model="Fineoffset-WHx080"} 18.414410
prom433_snr{channel="3", id="91", model="Nexus-TH"} 18.414410
prom433_snr{channel="6", id="3672", model="Eurochron-EFTH800"} 18.378820
prom433_snr{channel="4", id="1864", model="Eurochron-EFTH800"} 19.331660
prom433_snr{channel="1", id="146", model="Nexus-TH"} 17.663450
prom433_snr{channel="2", id="480", model="Eurochron-EFTH800"} 18.400790
prom433_snr{channel="5", id="2492", model="Eurochron-EFTH800"} 18.217140
prom433_snr{id="225212", model="Akhan-100F14"} 7.630500
prom433_snr{channel="E", id="11922", model="Acurite-3n1"} 19.331660
#HELP prom433_temperature The temperature in degrees celcius.
#TYPE prom433_temperature gauge 
prom433_temperature{id="250", model="Fineoffset-WHx080"} 13.600000
prom433_temperature{channel="3", id="91", model="Nexus-TH"} 20.000000
prom433_temperature{channel="6", id="3672", model="Eurochron-EFTH800"} 19.000000
prom433_temperature{channel="4", id="1864", model="Eurochron-EFTH800"} 19.600000
prom433_temperature{channel="1", id="146", model="Nexus-TH"} 20.400000
prom433_temperature{channel="2", id="480", model="Eurochron-EFTH800"} 18.700000
prom433_temperature{channel="5", id="2492", model="Eurochron-EFTH800"} 20.000000
#HELP prom433_wind_avg The average windspeed in km/h.
#TYPE prom433_wind_avg gauge 
prom433_wind_avg{id="250", model="Fineoffset-WHx080"} 3.672000
#HELP prom433_wind_dir_deg The wind direction in degrees.
#TYPE prom433_wind_dir_deg gauge 
prom433_wind_dir_deg{id="250", model="Fineoffset-WHx080"} 270.000000
#HELP prom433_wind_max The maximum windspeed in km/h.
#TYPE prom433_wind_max gauge 
prom433_wind_max{id="250", model="Fineoffset-WHx080"} 4.896000

Metadata

Release files for prom433 3.1.1

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for prom433 3.1.1
File	Size	Uploaded	Provenance
prom433-3.1.1.tar.gz	24.7 kB	Jan 16, 2026	Without provenance	Details

Release files / prom433-3.1.1.tar.gz

Download URL	prom433-3.1.1.tar.gz
Size	24.7 kB
Tags	Source
SHA-256 checksum How to use checksums	`421823820ead2d70762286f2852a7517bfad28778d135b9051eacc0f99265edc`
BLAKE2b-256 checksum How to use checksums	`d3518c815c267f0ae895d2c8242dc90ab7f9b10f7f0d47e35712b0d26979085f`
Upload date	Jan 16, 2026
Uploaded using Trusted Publishing? What is trusted publishing?	No
Uploaded via	`twine/6.2.0 CPython/3.14.2`

Security for prom433 3.1.1

Report project as malware

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

No provenance found

None of the files in this release were uploaded with provenance metadata.

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

To learn more about protecting yourself from malicious actors, visit our package security documentation.