protozfits 2.12.0

Python bindings for the protobuf zfits library

protozfits-python

Low-level reading and writing of zfits files using google protocol buffer objects.

To analyze data, you might be more interested in using a ctapipe plugin to load your data into ctapipe. There are currently several plugins using this library as a dependency for several CTA(O) prototypes:

• ctapipe_io_lst to read LST-1 commissioning raw data: https://github.com/cta-observatory/ctapipe_io_lst
• ctapipe_io_nectarcam to read NectarCam commissiong raw data: https://github.com/cta-observatory/ctapipe_io_nectarcam/
• ctapipe_io_zfits for general reading of CTA zfits data, currently only supports DL0 as written during the ACADA-LST test campaign.

Note: before version 2.4, the protozfits python library was part of the adh-apis Repository.

To improve maintenance, the two repositories were decoupled and this repository now only hosts the python bindings (protozfits). The needed C++ libZFitsIO is build from a git submodule of the adh-apis.

Table of Contents

• Installation
• Usage
  • Open a file
  • Get an event
  • RunHeader
  • Table header
  • Performance
• Command-Line Tools

Installation

Users

This package is published to PyPI and conda-forge. PyPI packages include pre-compiled manylinux wheels (no macOS wheels though) and conda packages are built for Linux and macOS.

When using conda, it's recommended to use the miniforge conda distribution, as it is fully open source and comes with the faster mamba package manager.

So install using:

pip install protozfits

or

mamba install protozfits

For development

This project is build using scikit-build-core, which supports editable installs recompiling the project on import by setting a couple of config-options for pip. See https://scikit-build-core.readthedocs.io/en/latest/configuration.html#editable-installs.

To setup a development environment, create a venv, install the build requirements and then run the pip install command with the options given below:

$ python3 -m venv venv
$ source venv/bin/activate
$ pip install 'scikit-build-core[pyproject]' pybind11 'setuptools_scm[toml]'
$ pip install -e '.[all]' --no-build-isolation

You can now e.g. run the tests:

$ pytest src

scikit-build-core will automatically recompile the project when importing the library. Some caveats remain though, see the scikit-build-core documentation linked above.

Usage

If you are just starting with proto-z-fits files and would like to explore the file contents, try this:

Open a file

>>> from protozfits import File
>>> example_path = 'protozfits/tests/resources/example_9evts_NectarCAM.fits.fz'
>>> file = File(example_path)
>>> file
File({
    'RunHeader': Table(1xDataModel.CameraRunHeader),
    'Events': Table(9xDataModel.CameraEvent)
})

From this we learn, the file contains two Table named RunHeader and Events which contains 9 rows of type CameraEvent. There might be more tables with other types of rows in other files. For instance LST has its RunHeader called CameraConfig.

Getting an event

Usually people just iterate over a whole Table like this:

for event in file.Events:
    # do something with the event
    pass

But if you happen to know exactly which event you want, you can also directly get an event, like this:

event_17 = file.Events[17]

You can also get a range of events, like this:

for event in file.Events[100:200]:
    # do something events 100 until 200
    pass

It is not yet possible to specify negative indices, like file.Events[:-10] does not work.

If you happen to have a list or any iterable or a generator with event ids you are interested in you can get the events in question like this:

interesting_event_ids = range(100, 200, 3)
for event in file.Events[interesting_event_ids]:
    # do something with intesting events
    pass

RunHeader

Even though there is usually only one run header per file, technically this single run header is stored in a Table. This table could contain multiple "rows" and to me it is not clear what this would mean... but technically it is possible.

At the moment I would recommend getting the run header out of the file we opened above like this (replace RunHeader with CameraConfig for LST data):

assert len(file.RunHeader) == 1
header = file.RunHeader[0]

For now, I will just get the next event

event = file.Events[0]
type(event)
<class 'protozfits.CameraEvent'>
event._fields
('telescopeID', 'dateMJD', 'eventType', 'eventNumber', 'arrayEvtNum', 'hiGain', 'loGain', 'trig', 'head', 'muon', 'geometry', 'hilo_offset', 'hilo_scale', 'cameraCounters', 'moduleStatus', 'pixelPresence', 'acquisitionMode', 'uctsDataPresence', 'uctsData', 'tibDataPresence', 'tibData', 'swatDataPresence', 'swatData', 'chipsFlags', 'firstCapacitorIds', 'drsTagsHiGain', 'drsTagsLoGain', 'local_time_nanosec', 'local_time_sec', 'pixels_flags', 'trigger_map', 'event_type', 'trigger_input_traces', 'trigger_output_patch7', 'trigger_output_patch19', 'trigger_output_muon', 'gps_status', 'time_utc', 'time_ns', 'time_s', 'flags', 'ssc', 'pkt_len', 'muon_tag', 'trpdm', 'pdmdt', 'pdmt', 'daqtime', 'ptm', 'trpxlid', 'pdmdac', 'pdmpc', 'pdmhi', 'pdmlo', 'daqmode', 'varsamp', 'pdmsum', 'pdmsumsq', 'pulser', 'ftimeoffset', 'ftimestamp', 'num_gains')
event.hiGain.waveforms.samples
array([241, 245, 248, ..., 218, 214, 215], dtype=int16)

An LST event will look something like so:

>>> event
CameraEvent(
    configuration_id=1
    event_id=1
    tel_event_id=1
    trigger_time_s=0
    trigger_time_qns=0
    trigger_type=0
    waveform=array([  0,   0, ..., 288, 263], dtype=uint16)
    pixel_status=array([ 0,  0,  0,  0,  0,  0,  0, 12, 12, 12, 12, 12, 12, 12], dtype=uint8)
    ped_id=0
    nectarcam=NectarCamEvent(
        module_status=array([], dtype=float64)
        extdevices_presence=0
        tib_data=array([], dtype=float64)
        cdts_data=array([], dtype=float64)
        swat_data=array([], dtype=float64)
        counters=array([], dtype=float64))
    lstcam=LstCamEvent(
        module_status=array([0, 1], dtype=uint8)
        extdevices_presence=0
        tib_data=array([0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0], dtype=uint8)
        cdts_data=array([0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
               0, 0, 0, 0, 0, 0, 0, 0], dtype=uint8)
        swat_data=array([0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
               0, 0, 0, 0], dtype=uint8)
        counters=array([  0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
                 0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,   0,
                 0,   0,   1,   0,   0,   0,  31,   0,   0,   0, 243, 170, 204,
                 0,   0,   0,   0,   0], dtype=uint8)
        chips_flags=array([    0,     0,     0,     0,     0,     0,     0,     0, 61440,
                 245, 61440,   250, 61440,   253, 61440,   249], dtype=uint16)
        first_capacitor_id=array([    0,     0,     0,     0,     0,     0,     0,     0, 61440,
                 251, 61440,   251, 61440,   241, 61440,   245], dtype=uint16)
        drs_tag_status=array([ 0, 12], dtype=uint8)
        drs_tag=array([   0,    0, ..., 2021, 2360], dtype=uint16))
    digicam=DigiCamEvent(
        ))
>>> event.waveform
array([  0,   0,   0, ..., 292, 288, 263], dtype=uint16)

event supports tab-completion, which I regard as very important while exploring. It is implemented using collections.namedtuple. I tried to create a useful string representation, it is very long, yes ... but I hope you can still enjoy it:

>>> event
CameraEvent(
    telescopeID=1
    dateMJD=0.0
    eventType=<eventType.NONE: 0>
    eventNumber=97750287
    arrayEvtNum=0
    hiGain=PixelsChannel(
        waveforms=WaveFormData(
            samples=array([241, 245, ..., 214, 215], dtype=int16)
            pixelsIndices=array([425, 461, ..., 727, 728], dtype=uint16)
            firstSplIdx=array([], dtype=float64)
            num_samples=0
            baselines=array([232, 245, ..., 279, 220], dtype=int16)
            peak_time_pos=array([], dtype=float64)
            time_over_threshold=array([], dtype=float64))
        integrals=IntegralData(
            gains=array([], dtype=float64)
            maximumTimes=array([], dtype=float64)
            tailTimes=array([], dtype=float64)
            raiseTimes=array([], dtype=float64)
            pixelsIndices=array([], dtype=float64)
            firstSplIdx=array([], dtype=float64)))
# [...]

Table header

fits.fz files are still normal FITS files and each Table in the file corresponds to a so called "BINTABLE" extension, which has a header. You can access this header like this:

>>> file.Events
Table(100xDataModel.CameraEvent)
>>> file.Events.header
# this is just a sulection of all the contents of the header
XTENSION= 'BINTABLE'           / binary table extension
BITPIX  =                    8 / 8-bit bytes
NAXIS   =                    2 / 2-dimensional binary table
NAXIS1  =                  192 / width of table in bytes
NAXIS2  =                    1 / number of rows in table
TFIELDS =                   12 / number of fields in each row
EXTNAME = 'Events'             / name of extension table
CHECKSUM= 'BnaGDmS9BmYGBmY9'   / Checksum for the whole HDU
DATASUM = '1046602664'         / Checksum for the data block
DATE    = '2017-10-31T02:04:55' / File creation date
ORIGIN  = 'CTA'                / Institution that wrote the file
WORKPKG = 'ACTL'               / Workpackage that wrote the file
DATEEND = '1970-01-01T00:00:00' / File closing date
PBFHEAD = 'DataModel.CameraEvent' / Written message name
CREATOR = 'N4ACTL2IO14ProtobufZOFitsE' / Class that wrote this file
COMPILED= 'Oct 26 2017 16:02:50' / Compile time
TIMESYS = 'UTC'                / Time system
>>> file.Events.header['DATE']
'2017-10-31T02:04:55'
>>> type(file.Events.header)
<class 'astropy.io.fits.header.Header'>

The header is provided by astropy.

pure protobuf mode

The library by default converts the protobuf objects into namedtuples and converts the AnyArray data type to numpy arrays. This has some runtime overhead. In case you for example know exactly what you want from the file, then you can get a speed-up by passing the pure_protob=True option:

>>> from protozfits import File
>>> file = File(example_path, pure_protobuf=True)
>>> event = next(file.Events)
>>> type(event)
<class 'ProtoDataModel_pb2.CameraEvent'>

Now iterating over the file is faster than before. But you have no tab-completion and some contents are less useful for you:

>>> event.eventNumber
97750288   # <--- just fine
>>> event.hiGain.waveforms.samples

type: S16
data: "\362\000\355\000 ... "   # <---- goes on "forever" .. raw bytes of the array data
>>> type(event.hiGain.waveforms.samples)
<class 'CoreMessages_pb2.AnyArray'>

You can convert these AnyArrays into numpy arrays like this:

>>> from protozfits import any_array_to_numpy
>>> any_array_to_numpy(event.hiGain.waveforms.samples)
array([242, 237, 234, ..., 218, 225, 229], dtype=int16)

Command-Line Tools

This module comes with a command-line tool that can re-compress zfits files using different options for the default and specific column compressions. This can also be used to extract the first N events from a large file, e.g. to produce smaller files for unit tests.

Usage:

$ python -m protozfits.recompress_zfits --help