psj-lib 1.2.1

Python library for amplifiers and other devices of piezosystem jena

psj-lib

A comprehensive Python library for controlling piezoelectric amplifiers and control devices manufactured by piezosystem jena GmbH.

✨ Features

• Asynchronous Architecture - Built on Python's asyncio for efficient, non-blocking device communication
• Multi-Device Support - Extensible framework supporting multiple device families (currently d-Drive and 30DV50/300)
• Comprehensive Capabilities - Full access to position control, PID tuning, waveform generation, data recording, and filtering
• Multiple Transport Protocols - Connect via Serial (USB) or Telnet (Ethernet)
• Type-Safe API - Complete type hints for excellent IDE autocomplete and type checking
• Extensive Documentation - Comprehensive docstrings, examples, and developer guides

🔧 Supported Devices

d-Drive Modular Amplifier

The d-Drive series represents piezosystem jena's modular piezo amplifier family:

• High Resolution: 20-bit DAC/ADC for precision control
• Fast Sampling: 50 kHz (20 µs period) for responsive control
• Modular Design: 1-6 channel configurations in compact enclosure
• Advanced Control: Integrated PID controller with configurable filters
• Waveform Generation: Built-in function generator with scan modes
• Data Acquisition: 2-channel recorder with 500,000 samples per channel
• Hardware Triggers: Precise timing and synchronization

Note: For NV200 please use the nv200-python-lib.

PSJ 30DV50/300 (Standalone Amplifier)

The PSJ 30DV50/300 is a single-channel, d-Drive-compatible amplifier:

• Single Channel: Standalone unit with one channel (ID 0)
• d-Drive Compatible: Uses the same command set and capabilities
• Full Feature Set: PID control, waveform generation, data recorder, filters

📦 Installation

pip install psj-lib

Requirements

• Python 3.12 or higher
• Windows 10/11, Linux, or macOS 10.15+

🚀 Quick Start

Basic Position Control

import asyncio
from psj_lib import DDriveDevice, TransportType

async def main():
    # Connect to device
    device = DDriveDevice(TransportType.SERIAL, "COM3")
    
    async with device:
        # Get first channel
        channel = device.channels[0]
        
        # Enable closed-loop control
        await channel.closed_loop_controller.set(True)
        
        # Move to target position
        await channel.setpoint.set(50.0)
        
        # Read actual position
        position = await channel.position.get()
        print(f"Position: {position:.2f} µm")

if __name__ == "__main__":
    asyncio.run(main())

Device Discovery

from psj_lib import PiezoDevice, DiscoverFlags

# Discover all devices on Serial and Telnet
devices = await PiezoDevice.discover_devices(
    flags=DiscoverFlags.ALL_INTERFACES
)

for device in devices:
    info = device.device_info
    print(f"Found: {info.device_id} on {info.transport_info.identifier}")

PID Control Configuration

# Configure PID parameters for closed-loop control
await channel.pid_controller.set(
    p=10.0,      # Proportional gain
    i=5.0,       # Integral gain
    d=0.5,       # Derivative gain
    diff_filter=100.0  # Derivative filter
)

# Enable notch filter to suppress resonance
await channel.notch.set(
    enabled=True,
    frequency=500.0,
    bandwidth=50.0
)

Waveform Generation

from psj_lib import DDriveWaveformType

# Generate 10 Hz sine wave for scanning
await channel.waveform_generator.sine.set(
    amplitude=20.0,
    offset=50.0,
    frequency=10.0
)
await channel.waveform_generator.set_waveform_type(DDriveWaveformType.SINE)

Data Recording

from psj_lib import DDriveDataRecorderChannel

# Configure data recorder for 1 second capture at 50 kHz
await channel.data_recorder.set(
    memory_length=50000,  # 50k samples
    stride=1              # No decimation
)

# Start recording
await channel.data_recorder.start()

# ... perform motion ...

# Retrieve data
position_data = await channel.data_recorder.get_all_data(
    DDriveDataRecorderChannel.POSITION
)
voltage_data = await channel.data_recorder.get_all_data(
    DDriveDataRecorderChannel.VOLTAGE
)

📖 Documentation

Full documentation is available at: GitHub Repository

• Getting Started - Tutorials and basic usage
• API Reference - Complete API documentation
• Device Documentation - Device-specific guides (d-Drive)
• Base Capabilities - Common capabilities across all devices
• Examples - Practical usage examples
• Developer Guide - Extending the library

💡 Examples

Check out the examples directory for more practical examples:

1. Device Discovery and Connection
2. Simple Position Control
3. PID Configuration
4. Data Recorder Capture
5. Waveform Generation Basics
6. Filter Configuration
7. Backup and Restore Configuration

🏗️ Architecture

psj-lib uses a three-layer hierarchical architecture:

PiezoDevice (e.g., DDriveDevice)
  ├─ Transport protocol (Serial/Telnet) with command caching
  └─ PiezoChannels (e.g., DDriveChannel)
      └─ Capabilities (Position, PID, WaveformGenerator, etc.)

Key Design Patterns

• Capability-Based Architecture: Features are modular PiezoCapability subclasses
• Async/Await: All I/O operations use Python's asyncio
• Command Caching: Reduces latency for frequently read values
• Type Safety: Full type hints for IDE support and type checking

🤝 Contributing

Contributions are welcome! Please visit the GitHub repository for more information.

💬 Support

• Documentation: GitHub Pages
• Issues: GitHub Issues
• Website: piezosystem jena GmbH

📄 License

See LICENSE file in the GitHub repository.

---

Made with ❤️ by piezosystem jena GmbH