psychopy-chronos

Python driver for the PST Chronos response box, with a drop-in PsychoPy keyboard replacement.

Installation

pip install psychopy-chronos

Windows driver

If you've never installed E-Prime on your machine, install the USB driver for Chronos from the chronos_driver_win/ directory.

Usage

Standalone

import time
from chronos import Chronos

with Chronos() as box:
    time.sleep(5)    
    for evt in box.get_button_events():
        print(f"Button: {evt.button}, Press: {evt.is_press}, Hardware timestamp (μs): {evt.hw_timestamp_us}")

AUX inputs

Chronos comes with AUX cable for digital inputs and outputs. You could, for example, send TTL trigger from your PC into Chronos at stimulus onset to obtain Chronos hardware timestamp. Comparing this with chronos timestamp of the button press gives you jitter-free RTs.

import time
from chronos import Chronos

with Chronos() as box:
    while True:
        # send TTL trigger via for example psychopy.parallel 
        for e in box.get_aux_events():
            if e.is_rising: # trigger onset
                stim_onset_us = e.hw_timestamp_us

        for e in box.get_button_events():
            if e.is_press and stim_onset_us:
                print((e.hw_timestamp_us - stim_onset_us) / 1000.0)
                exit()
        time.sleep(0.001)

Two digital inputs channels are coded as 'F' and 'G' following PST pinout.

Led control

Use ChronosLEDs to manipulate the five onboard lights.

from chronos import ChronosLEDs

with ChronosLEDs() as box:
    box.init_leds()
    # light leftmost, centre, and rightmost leds in red for 1.5 seconds
    box.set_leds(colors=(255, 0, 0), duration=1.5, leds=(0, 2, 4))
    
    # or leave them on without blocking code execution
    box.leds_on(colors=[(255,0,0), (0,255,0)], leds=(0, 1))
    box.leds_off()

PsychoPy Builder

Add a Code Component with this in the Before Experiment tab:

from chronos import HybridKeyboard
from psychopy.hardware import keyboard
keyboard.Keyboard = HybridKeyboard

All Builder Keyboard Response components will then capture Chronos button presses alongside regular keyboard input. Buttons are coded '1' through '5' left to right, so add them to the allowed keys list in your Keyboard Response component.

To save hardware timestamps, add this to the End Routine tab:

if key_resp.response_log:
    thisExp.addData('chronos_hw_us',
        [getattr(k, 'hw_timestamp_us', '') for k in key_resp.response_log])
    thisExp.addData('chronos_pc_time_s',
        [getattr(k, 'tDown', '') for k in key_resp.response_log])

You can find a simple Builder demo in the examples/ directory.

Hardware timestamps and drift correction

Each press is timestamped by both the host PC (chronos_pc_time_s, seconds from experiment start) and the Chronos internal crystal (chronos_hw_us, microseconds). The crystal drifts relative to the PC clock. I measured +68.7ppm on my laptop (1001 presses over 685s, about 47ms of total drift). The drift is linear and can be corrected offline by regressing chronos_pc_time_s onto chronos_hw_us:

import numpy as np
slope, intercept = np.polyfit(hw_us_array, pc_time_array, 1)
corrected_rt = slope * hw_rt_us + intercept

Drift magnitude will vary across different computers. The test script used for this measurement is in test_chronos_timing.py. Feel free to push the buttons few hundred times to test the drift yourself.

chronos_hw_us is a 32-bit counter that wraps every 71.6 minutes. Use modulo 2^32 arithmetic for elapsed time calculations across long sessions.