puc8a 0.1.4

Assembler and C compiler for the PUC8a processor

PUC8a

Assembler and C compiler for the PUC8a processor

Copyright 2020-2025 Wouter Caarls

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.

Introduction

PUC8a is an accumulator-based microcontroller with 8-bit registers. It is used in the ENG1448 course of PUC-Rio. This is the assembler and C compiler infrastructure for it.

Instruction set architecture

This very simple processor is a Harvard design, with 8-bit instructions and 8-bit data values. Both instruction and data memories have 256 addresses.

Registers

There are 16 registers. r14 is sp; r15 is pc. The C compiler uses r13 as fp.

Instructions

All ALU instructions set flags.

Opcode(4)	Data(4)	Mnm	Effect	Example
0000	rs	LDA	acc <- [rs]	lda r0
0001	rd	STA	[rd] <- acc	sta r0
0100	0000	LDI	acc <- [pc+1], pc <- pc + 1	ldi 42
0101	cond	B	if cond then pc <- [pc + 1] else pc <- pc + 1	bcc 42
0110	rs	GET	acc <- rs	get r0
0111	rs	SET	rs <- acc	set r0
1000	rs	ADD	acc <- acc + rs	add r0
1001	rs	SUB	acc <- acc - rs	sub r0
1010	rd	INC	rd <- rd + 1	inc r0
1011	rd	DEC	rd <- rd - 1	dec r0
1100	rs	AND	acc <- acc & rs	and r0
1101	rs	OR	acc <- acc | rs	or r0
1110	rs	XOR	acc <- acc ^ rs	xor r0
1111	rs	SHFT	if (rs >= 0) acc <- acc << rs else acc <- acc >> -rs	shft r0

Pseudo-instructions

Pseudo-instruction	Actual instruction
beq	bz
bne	bnz
bhs	bcs
blo	bcc

Condition codes

Condition	Meaning
0000	Unconditional
0001	Zero flag set
0010	Zero flag not set
0011	Carry flag set
0100	Carry flag not set
0101	Signed less than
0110	Signed greater than or equal

Assembly language

Assembly statements generally follow the following structure

[LABEL:] MNEMONIC [OPERAND[, OPERAND]...]

The available MNEMONICs can be found in the table above. OPERANDs can be registers, constants, or labels. Labels used as operands must be prefixed with @:

loop: b @loop

When the operand is used as the contents of a memory address, it must be enclosed in square brackets:

ldi @inp
set r0
lda [r0]
.section data
inp: .db 0

Apart from these statements, the assembler recognizes the following directives:

• .include "FILE"
  

  Includes a given FILE. The path is relative to the file being processed.

• .section SECTION
  

  Define into which memory SECTION the subsequent code is assembled. Options are code and data. The default is code.

• .org ADDRESS
  

  Sets memory ADDRESS at which the subsequent code will be assembled.

• .equ LABEL VALUE
  

  Creates a LABEL for a specific constant VALUE. Values may be character constants, e.g. "c"

• .db VALUE
  

  Inserts a VALUE into the instruction stream. The value may be a string constant, e.g. "Hello, world"

• .macro NAME
  ; code
  .endmacro
  

  Defines a macro. The code inside the macro can use arguments of the form $0, $1, etc., which are replaced by the actual arguments when the macro is called using NAME arg0, arg1. Labels inside the macro that start with an underscore are localized such that the same macro can be called multiple times.

Installation

pip install puc8a

or

git clone https://github.com/wcaarls/puc8a
cd puc8a
pip install .

Usage

usage: as-puc8a [-h] [-o OUTPUT] [-s] [-t N] [-E] file

PUC8a Assembler (c) 2020-2025 Wouter Caarls, PUC-Rio

positional arguments:
  file                  ASM source file

options:
  -h, --help            show this help message and exit
  -o OUTPUT, --output OUTPUT
                        Output file
  -s, --simulate        Simulate resulting program
  -t N, --test N        Simulate for 1000 steps and check whether PC == N
  -E                    Output preprocessed assembly code

usage: cc-puc8a [-h] [-o OUTPUT] [-s] [-t N] [-S] [-O {0,1,2}] file

PUC8a C compiler (c) 2020-2025 Wouter Caarls, PUC-Rio

positional arguments:
  file                  C source file

options:
  -h, --help            show this help message and exit
  -o OUTPUT, --output OUTPUT
                        Output file
  -s, --simulate        Simulate resulting program
  -t N, --test N        Simulate for 1000 steps and check whether PC == N
  -S                    Output assembly code
  -O {0,1,2}            Optimization level

Examples

Directly compile C to VHDL

./cc-puc8a examples/c/hello.c

Create assembly from C

./cc-puc8a examples/c/hello.c -S

Assemble to VHDL code

./as-puc8a examples/asm/ps2_lcd.asm

Assemble to VHDL package

./as-puc8a examples/asm/ps2_lcd.asm -o ps2_lcd.vhdl

Simulate resulting C or assembly program

./cc-puc8a -O0 examples/c/unittest.c -s
./as-puc8a examples/asm/simple.asm -s

Acknowledgments

The C compiler is based on PPCI.

Copyright (c) 2011-2019, Windel Bouwman

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.