Aura Frames (PUSHD) Python Client [unofficial]

Implements most of the AuraFrames APIs in Python.

Any advice or issues are welcome.

Provenance: this project is a renamed, heavily extended fork of zmanowar/auraframes — the original 2023 reverse-engineering of the Aura/Pushd API is his work (see Credits and LICENSE). Unofficial community tool: not affiliated with or endorsed by Aura Frames Inc.

Read path: VERIFIED end-to-end against api.pushd.com/v5 (login → list → fetch → download). See VERIFICATION-REPORT.md for the per-step status and the live API drift repaired.

Write path: VERIFIED end-to-end against a live frame — upload, hide, re-show, remove, and irreversible delete have each been exercised through the CLI, including the confirmation gates. See docs/CLI.md for the commands and the known issues.

The device upload/download flows described near the end of this README remain documented from code, not verified — they describe what the official app does, not a path this client exercises.

Requirements

• Python 3.14 (pinned via .python-version) and uv for environment, dependency, and interpreter management.
• A live Aura account (email + password) for any command that actually hits the API.

Install (Ubuntu/Debian)

Pre-built .deb packages embed their own Python 3.14 runtime under /usr/lib/pushframe/ — no system Python is used or modified, and the package needs only ca-certificates and libc6. Removal is clean (the package owns every file it ships, including bytecode; nothing is written into the system tree at run time).

# from a release artifact:
sudo apt install ./pushframe_<version>_amd64.deb

uv tool (or pip) — any Linux distro, per-user

The PyPI package is pure Python and self-contained — no system Python is touched either; uv manages an isolated environment for the tool:

uv tool install pushframe      # or: pipx install pushframe
pushframe --version

Which path when? deb/APT = system-wide install on Ubuntu/Debian servers (root-owned, autoremove-friendly). uv tool install = per-user, no sudo, any distro with uv (or pipx) installed. Same CLI, same config (~/.config/pushframe/), same version story: every channel ships the same release, and pushframe --version tells you what runs.

APT repository

A signed APT repository is served from this project's GitHub Pages. Three commands, exactly as verified in a clean container:

# 0. the apt keyring dir (already present on recent systems)
sudo install -d -m 0755 /etc/apt/keyrings

# 1. trust the repository key
#    (dedicated signing key, fingerprint
#     0EE2DB2DB1360C58C4B2E0BF2EC06828F722F391)
curl -fsSL https://coredmp95.github.io/pushframe/dists/pushframe.asc \
  | sudo gpg --dearmor -o /etc/apt/keyrings/pushframe.gpg

# 2. add the sources entry
echo "deb [signed-by=/etc/apt/keyrings/pushframe.gpg] https://coredmp95.github.io/pushframe stable main" \
  | sudo tee /etc/apt/sources.list.d/pushframe.list

# 3. install
sudo apt update && sudo apt install pushframe

apt update must stay free of signature warnings — if it is not, compare the key fingerprint above with gpg --show-keys /etc/apt/keyrings/pushframe.gpg. The repository and the .deb are produced by scripts/publish-apt-repo.sh and scripts/build-deb.sh; the signature chain (InRelease/Release.gpg) is verified end-to-end by scripts/test-apt-journey-container.sh.

Setup & Run (uv, from source)

This project uses uv exclusively (no pip / venv / poetry). From a clean checkout:

# 1. Install runtime dependencies (creates .venv, respects uv.lock + .python-version).
#    uv auto-installs the pinned Python 3.14 interpreter on first sync if needed.
uv sync

# 2. Run the read-path demo (login -> list frames -> fetch assets -> download one image).
#    With PUSHFRAME_EMAIL / PUSHFRAME_PASSWORD unset it prints a helpful message and exits cleanly.
uv run python main.py

To run the asserted live read-path proof, you need the dev extra (pytest + python-dotenv live there and are not installed by uv sync alone):

# Install the dev extra, then run the 4 live read-path tests (needs real credentials):
uv sync --extra dev
uv run pytest -m live
# — or, in one shot without a separate sync step:
uv run --extra dev pytest -m live

# The credential-less default suite stays green (live tests deselected):
uv run pytest -m "not live"

Documenting a bare uv run pytest -m live without --extra dev (or a prior uv sync --extra dev) will fail on a clean checkout — pytest is an opt-in extra.

Environment Variables

Credentials are read from environment variables (see pushframe/utils/settings.py). Copy .env.sample to .env and fill in your credentials for the live test path (.env is gitignored — never commit real secrets); shell-exported variables also work and take precedence.

Required:

• PUSHFRAME_EMAIL: The email of the account to authenticate with.
  • Aura.login may optionally be called with an email and password instead of setting env vars.
• PUSHFRAME_PASSWORD: The password of the account to authenticate with.

Optional (with defaults):

• PUSHFRAME_LOCALE: The locale of the device to mimic. (Default: en-US)
• PUSHFRAME_APP_IDENTIFIER: The identifier of the aura app. (Default: com.pushd.client)
  • This may change between iOS and Android app implementations, untested.
• PUSHFRAME_DEVICE_IDENTIFIER: The unique identifier of the device to mimic. (Default: 0000000000000000)
  • Ideally this should be set to your unique identifier, though it accepts others.

Optional — write budget & geo guard (used by sync --apply, push, and google-sync --apply; see Write Path below):

• PUSHFRAME_COUNTRY: Expected account country for the geo pre-flight check, e.g. FR. Unset disables the check entirely.
• PUSHFRAME_GEO_FAIL_OPEN: Continue if the country lookup itself fails. (Default: true)
• PUSHFRAME_WRITE_BUDGET_CAPACITY: Token-bucket capacity, in requests. (Default: 30)
• PUSHFRAME_WRITE_BUDGET_REFILL_PER_MIN: Refill rate per minute. (Default: 0.75)
• PUSHFRAME_WRITE_BUDGET_WAIT: Wait for a refill rather than stopping. (Default: true)
• PUSHFRAME_WRITE_BUDGET_MAX_WAIT: Max seconds to wait. (Default: 3600)
• PUSHFRAME_STATE_DIR: Where the persisted budget lives. (Default: ~/.config/pushframe)

Optional — Google sync:

• PUSHFRAME_PROBE_CHROME_PROFILE: Dedicated Chrome profile directory used by google-link for the one-time cookie harvest (required for that command only).
• PUSHFRAME_GOOGLE_SYNC_REMOVAL_THRESHOLD: Fraction of the frame's photos above which google-sync demands explicit confirmation before hiding (Default: 0.2).

Boolean variables accept 1, true, yes, on (case-insensitive); anything else is false.

Legacy names: the old AURA_* spellings (AURA_EMAIL, AURA_STATE_DIR, AURA_WRITE_BUDGET_*, AURA_PROBE_CHROME_PROFILE, …) are still read as fallbacks — one release of grace. The old config directory ~/.config/auraframes/ is migrated automatically to ~/.config/pushframe/ on the first run (the old directory is left untouched).

CLI Usage (pushframe)

A CLI wraps the library (installed as the pushframe entry point by uv sync). There are eight commands:

→ Full reference with every flag, real output, and known issues: docs/CLI.md

Start here

# Health check: are credentials set, does login work, which frames exist?
uv run pushframe status

PUSHFRAME_EMAIL: set
PUSHFRAME_PASSWORD: set
Logged in as you@example.com
1 frames:
  - Living Room (id: 00000000-0000-0000-0000-000000000000)

--frame takes a case-insensitive substring of the frame name, or an exact id. An ambiguous substring stops the run and lists the matches rather than guessing:

uv run pushframe inspect --frame "living"

sync — match a directory (dry run by default)

Nothing changes without --apply:

uv run pushframe sync ./photos/ --frame "Living Room"

Sync plan for Living Room (id: 00000000-...) — DRY RUN, nothing will be changed
To upload: 12
To hide: 3
To re-show: 1
Unchanged: 84
Already hidden: 2 (no action needed)

Photos are matched by md5 content hash, not filename — renaming a file locally does not cause a re-upload.

# Apply it. One confirmation covers the whole plan and echoes the frame name + id.
uv run pushframe sync ./photos/ --frame "Living Room" --apply

# Non-interactive (CI, scripts) — --yes is required, otherwise it fails closed.
uv run pushframe sync ./photos/ --frame "Living Room" --apply --yes

Removed photos are hidden, not deleted

A photo that leaves your directory is hidden by default: it stops displaying but stays in your account, and comes straight back if you restore the file. The frame has no photo-count limit, so preservation is the safe default — a mistaken sync should cost visibility, never photos.

# Default: hide. Reversible.
uv run pushframe sync ./photos/ --frame "Living Room" --apply --yes

# Remove from this frame (the asset survives in your account).
uv run pushframe sync ./photos/ --frame "Living Room" --apply --yes --delete

# Destroy account-wide. IRREVERSIBLE.
uv run pushframe sync ./photos/ --frame "Living Room" --apply --hard-delete

--delete and --hard-delete are mutually exclusive (argparse rejects both together).

--hard-delete does not accept a y/N answer. It makes you re-type the exact count, so you have to read the number first:

To hard-delete: 12
IRREVERSIBLE: 12 photo(s) will be permanently destroyed account-wide, not just removed from
this frame. This cannot be undone.
To confirm, type the number of photos to hard-delete (12): y
Aborted.

Only 12 proceeds. Note that --yes skips this gate like any other, so sync --apply --yes --hard-delete destroys without prompting — use it deliberately.

Restoring a hidden photo

Because hiding is reversible and hidden photos still count as present for deduplication, the round trip is just moving the file back:

mv ./photos/sunset.jpg /tmp/ && uv run pushframe sync ./photos/ --frame "Living Room" --apply --yes
# -> To hide: 1

mv /tmp/sunset.jpg ./photos/ && uv run pushframe sync ./photos/ --frame "Living Room" --apply --yes
# -> To re-show: 1   (and "To upload: 0" -- it is un-hidden, not uploaded again)

push — upload only, never removes

push is structurally additive: its removal list is forced empty, so it cannot hide, remove, or re-show anything. Use it when you want to add from a supply directory without the frame being diffed to match it.

# Dry run, then apply. Photos already on the frame are skipped by md5.
uv run pushframe push ./buffet/ --frame "Living Room"
uv run pushframe push ./buffet/ --frame "Living Room" --apply --yes

# Pacing flags for the anti-abuse write budget (see below):
#   --limit N         upload at most N photos this run
#   --batch-size N    assets per select_asset/batch_update call (default 50)
#   --chunk-delay S   seconds to pause between write chunks (default 5)
uv run pushframe push ./buffet/ --frame "Living Room" --apply --yes --limit 40

# Budget / geo overrides:
#   --max-wait S      cap the wait for budget refill (default 3600)
#   --no-wait         stop instead of waiting when the budget is dry
#   --country XX      expected account country for the geo pre-flight guard
#   --ignore-budget   bypass the budget entirely (escape hatch)

If you are unsure which to use, use push — it cannot take anything away.

Google Photos albums — google-link / google-album

These commands read your Google Photos shared albums (a separate account from the Aura API). The mechanism is the browser-automation one proven in phase 16: a dedicated-profile browser harvests the session cookies once, and every later operation is plain authenticated HTTP over the internal batchexecute API — no browser runs again.

One-time setup: point PUSHFRAME_PROBE_CHROME_PROFILE at a dedicated Chrome profile directory (your daily-driver profile is structurally unreachable), then link:

export PUSHFRAME_PROBE_CHROME_PROFILE=~/.config/pushframe/chrome-profile
uv run pushframe google-link

A browser window opens; log into Google inside it. The command auto-detects the completed login, saves the session to ~/.config/pushframe/google-cookies.json with 0600 permissions outside the repository, and prints only identity signals — cookie names, a count, never values. Re-linking is the same command: when a session expires (they do, that cadence is an accepted operational cost), run google-link again.

Then select and enumerate an album by name, share link, or id:

# Discover the account's shared albums:
uv run pushframe google-album --list

# By name substring — ambiguity prints a numbered list and stops (exit 2):
uv run pushframe google-album "Corse"

# By share link or album id — used exactly as given:
uv run pushframe google-album "https://photos.google.com/share/AF1Qip...?key=..."

The resolved album is walked completely (the internal snAcKc continuation RPC, 300 items/page, until exhaustion — the count must match what the Google Photos UI shows) and every item's exact byte size is measured with 1-byte Range requests, so the summary prints the exact disk weight without downloading a single photo:

Album: Vacances Corse (id shape: photos.google.com/share/AF1Qip…0001)
Items: 24 (pages: 1, exhausted: cleanly)
Disk weight: 90,813,552 bytes = 86.6 MiB (min 512,331, max 8,120,444, avg 3,783,898)
Per-item (index | id shape | WxH | bytes):
     1 | AF1Qip…base1 | 4898x3265 | 3,412,350
     ...

Privacy posture: session cookies live only in the 0600 vault outside the repository and are readable solely by the pushframe.google package (sync/CLI code paths are structurally refused); album capability URLs are secrets-like and are always printed redacted (AF1Qip…<last4>). status reports the Google link state — linked: yes/no, the account email, session usability — and never a cookie value or token.

google-sync — mirror a Google album onto a frame

One verb ties the Google side to the frame: enumerate the album, download what is missing, upload it, and mirror removals as hides. Start to finish:

# One-time setup (or again whenever the Google session expires):
export PUSHFRAME_PROBE_CHROME_PROFILE=~/.config/pushframe/chrome-profile
uv run pushframe google-link

# Find the album, then mirror it:
uv run pushframe google-album --list
uv run pushframe google-sync "Cadre" --frame "Cadre de Fabrice"           # dry-run plan (writes nothing)
uv run pushframe google-sync "Cadre" --frame "Cadre de Fabrice" --apply   # one y/N, then it mirrors

# Non-interactive (CI, scripts) — --yes is required for --apply, otherwise it fails closed:
uv run pushframe google-sync "Cadre" --frame "Cadre de Fabrice" --apply --yes

A real first run against the live pair (album « Cadre », 24 photos, one of them already on the frame but hidden from an earlier experiment):

Plan: 23 to upload, 1 to re-show, 0 unchanged, 0 to hide, 0 already hidden
Videos skipped: 0 (metadata delta — videos are out of sync scope, never silently dropped)
Upload candidates: 23 items, 129,680 → 8,847,782 bytes (sum ≈ 87.0 MiB)

The re-show line is the md5 dedupe working across accounts: that photo's bytes were already on the frame, so the plan re-shows it instead of re-uploading it. After this apply the cache is pruned and the manifest persists — so a steady-state run costs one album listing and one frame listing, and downloads and uploads nothing:

Plan: 0 to upload, 0 to re-show, 23 unchanged, 0 to hide, 1 already hidden
Videos skipped: 0 (metadata delta — videos are out of sync scope, never silently dropped)

Why the second run is free

Photos download once into a staging cache (~/.config/pushframe/google-cache/<album>/), are uploaded with the same md5 convention the frame uses, and the cache is pruned after the uploads confirm. What survives is a persistent manifest (~/.config/pushframe/google-manifest.json, mode 0600) mapping each Google photo id to its md5. The plan is rebuilt from the album listing + manifest, never from a walk of the pruned cache — that is what makes disk minimisation safe: "already synced" and "removed from the album" stay distinguishable.

Mirror semantics

• Remove a photo from the Google album, re-run with --apply: it is hidden on the frame (exclude_asset) — it stops displaying but stays. Re-add it to the album and the next run re-shows it without re-uploading a byte. Both halves were proven live (see 18-UAT.md in the planning tree).
• Videos are skipped with a counted line (the frame reports null md5 for videos, so content-hash diffing cannot see them) — never silently dropped.
• An empty or truncated album listing aborts with an error instead of producing a plan (SAFE-01) — a Google-side glitch can never read as "delete/hide everything".
• If a plan's removals exceed 20 % of the frame's photos, an explicit confirmation echoes both counts first (SAFE-02; threshold overridable via PUSHFRAME_GOOGLE_SYNC_REMOVAL_THRESHOLD).
• This verb never deletes. Removal means hide; the gated --delete/--hard-delete tiers stay with sync only (SAFE-03).
• A failed or partial download is reported as failed and retried next run — never uploaded as junk bytes (SAFE-04).
• Google-side downloads run concurrently (bounded pool); every frame write stays sequential and paced by the write budget.

Exit codes and logging

0 on success (a dry run and an aborted confirmation both count as success); 1 on missing credentials, login failure, an unresolvable --frame, any per-item failure, a rate-limit abort, a geo mismatch, or an exhausted budget.

Add --debug before the subcommand for verbose request/response logging on stderr (pushframe --debug status, not pushframe status --debug). Every run also writes a full log to logs/file_{timestamp}.log.

Known issue: writes sometimes 401 on the first try

Roughly 4 in 10 live write runs have been seen failing with 401 Unauthorized and succeeding on an immediate re-run, with no change to credentials or network. There is no automatic retry yet — if an apply reports 401 failures, just run it again. Repeating is safe: uploads dedupe by md5 and hides are idempotent. See docs/CLI.md for the other known quirks (asset-count mismatch, undeletable placeholder rows).

Write Path (upload) — status & anti-abuse budget

Live-verified (v2.0). Upload, hide, re-show, remove and hard-delete have each been run end-to-end against a real frame. The caveats below are about volume and reliability, not about whether the path works.

Key findings (from live runs + decompiling the official Android app):

• Writes intermittently return a bare 401 and succeed on retry — roughly 4 in 10 observed runs, independent of endpoint, credentials, or exit-IP country. The client has no automatic retry yet, so a failed apply should simply be re-run. This is distinct from the budget trip below: it clears immediately rather than after a cooldown.

• A write 401 is therefore not proof of a lockout. Retry with a fresh login first, then check the geo guard, then suspect the budget.

• select_asset and batch_update are native batch endpoints — the client now sends a whole chunk of assets per call (WRITE_BATCH_SIZE, default 50) instead of one call per file, collapsing ~3N Pushd write calls to ~2 per chunk.

• The account has a rolling write-volume budget over a time window (≈50 new assets observed before a trip). Exceeding it returns a bare 401/custom 475 (no Retry-After), which the client detects as a run of consecutive failures and aborts loudly rather than hammering. The official app never trips this because it drip-feeds uploads via a background JobScheduler queue over time (gated on charging + WiFi), retrying failures across runs.

• Consequence for bulk imports: use push --limit in small waves spaced over time rather than one big burst. sync/push are resumable — the md5 diff means re-running only attempts what is still missing. A large first-time import has still not been driven to completion in one sitting.

• A client-side token-bucket budget and geo pre-flight guard now run before every write (see the PUSHFRAME_WRITE_BUDGET_* / PUSHFRAME_COUNTRY variables above), so the server-side lockout is hard to reach by accident.

iOS/Android Device's Upload Image Flow

Documented from code, NOT verified in this revive milestone. The flow below is transcribed from the 2023-era implementation and has not been exercised against the live API during the read-path revive. Treat it as a reference, not a proven path. NOTE: the current CLI write path batches steps 4–9 across many assets per call (see Write Path above); the per-asset sequence below is the original single-asset reference.

Aura.upload_image attempts to implement this flow as closely as possible.

1. A frame is selected and the frame's data is retrieved from the API (/frames/<frame_id>.json).
2. An image on the device is selected for upload.
3. An Asset object is created for the image and a GUID (local_identifier) is generated.
4. A POST request is made (/frames/<frame_id>/select_asset.json) with the asset's local_identifier.
   • This allows the asset to be related to a specific frame once the image has been uploaded.
5. SQS is polled (may not be necessary)
   • The result does not seem to be used in a meaningful way.
6. Another select_asset.json request is sent with the same information.
7. A put_object request is made to the S3 bucket images.senseapp.co with the image, the MD5 and uploaded filename are retrieved.
8. The asset object is populated with the S3 response.
9. A PUT request is sent to /assets/batch_update.json with the asset information.
   • I believe this is when the location exif data is read from the image file itself and used to populate future asset requests. Manually populating the exif data on the Asset object before sending it does not get returned in future requests.
   • The height and width of the image can be spoofed in the Asset object to produce skewed images, it seems like only the location exif is used.
10. SQS is polled again

sequenceDiagram
    Device ->>  Aura Frames API: Selects a Frame
    Aura Frames API -->> Device: Frame object
    Device ->> Device: An image is selected and <br/>an asset object is created on the device.
    Device ->> Aura Frames API: PUT request to select the asset
    Note left of Aura Frames API: The asset's local_identifier<br/>and frame id are associated.
    Aura Frames API -->> Device: The number of assets that failed to associate
    Device ->> SQS: Polls queue
    Note left of SQS: The result does not seem to be used<br/>in a meaningful way.
    Device ->>  Aura Frames API: PUT request to select the asset
    Aura Frames API -->> Device: The number of assets that failed to associate
    Device ->> S3 Bucket: The image is uploaded via put_object.
    S3 Bucket -->> Device: The uploaded filename and MD5 of the image.
    Device ->> Device: Populates the Asset object with the S3 data.
    Device ->> Aura Frames API: The Asset object is uploaded.
    Note left of Aura Frames API: The image's exif data is used for the Asset's location.
    Device ->> SQS: Polls queue

iOS/Android Device's Download/View Image Flow

VERIFIED end-to-end this milestone (READ-01..READ-04) — see VERIFICATION-REPORT.md. main.py drives exactly this path.

1. A frame is selected and the frame's data is retrieved from the API (/frames/<frame_id>.json).
2. A paginated list of assets is retrieved with the frame_id (/frames/{frame_id}/assets.json).
3. A URL is built that contains the image proxy URL, the asset's uploaded user id, and the asset's S3 filename.
   • See export.py
4. The image is retrieved from the URL.
5. TODO: Describe rendering

TODOs

These are open reverse-engineering notes — documented from code, NOT verified in this revive milestone.

• Map out the actual SQS flow.
  • SQS may be polling constantly and used for push notification / update requests.
• Determine if it's possible to have 2 active logins for the same account
• Is it possible to associate an asset to multiple frames? Currently, the device flow uploads the image for each frame, there may be some backend process to dedupe them.
  • Worth checking if the Asset's (S3) filename changes.
• Reverse the actual frame's rendering process. Presumably it uses the same endpoints.
  • Worth checking with MITM proxy before JTAG/firmware dumping.

Credits

This is an unofficial, reverse-engineered client.

• Original author: zmanowar (zach@codehooker.com) — created the original Aura/Pushd Python client in 2023 (zmanowar/auraframes), including the reverse-engineered API models, the auth/read/upload flows, and the first version of this README. All of the reverse-engineering insight this project builds on is his work; his commits are preserved in this repository's git history.
• Revive & extend (2026): Fabrice DIDIERJEAN — modernized the ~3-year-old codebase onto Python 3.14 + uv, verified the read path live, then built and live-proved the whole current tool: the pushframe CLI (status/inspect/sync/push/reconcile), the batched anti-abuse write path, and the entire local Google Photos → frame mirror (cookie-vault linking, album enumeration, pruned-cache sync with a persistent manifest, hide-by-default semantics). Project renamed pushframe in v5.0.