px4-configuration 0.3.0

Tools and REST API for configuring PX4 from a companion computer

px4-configuration

Repository that collects scripts to configure and modify PX4 from a companion Linux computer. All tooling is built on top of MAVSDK-Python.

Installation

Development Installation

# Optional: create a virtual environment
python3 -m venv .venv
source .venv/bin/activate

# Install the package (installs all required dependencies)
pip install -e .

Building a Wheel Package

To build a distributable wheel (.whl) file:

# Install build tools (if not already installed)
pip install build

# Build the wheel package
python -m build --wheel

# The wheel file will be created in the dist/ directory
# Example: dist/px4_configuration-0.1.0-py3-none-any.whl

To build both wheel and source distribution:

python -m build

Installing from a built wheel:

# Install from the wheel file
pip install dist/px4_configuration-0.1.0-py3-none-any.whl

Requirements

• Python 3.10+
• PX4 flight controller connected over serial (e.g. /dev/pixhawk)
• User added to the dialout group for serial access (sudo usermod -aG dialout $USER)

Scripts

All scripts use a serial connection to talk to PX4.

• scripts/calibrate.py – run gyro, accel, mag, level and (future) ESC calibration
• scripts/set-params.py – bulk upload parameters from .params files in configs/
• scripts/upload-sdcard-config.py – upload files (e.g. extras.txt) to the PX4 SD card via MAVLink FTP
• scripts/shell.py – open an interactive PX4 NSH shell session over MAVLink
• scripts/px_uploader.py – PX4 firmware uploader (original PX4 script, unverified here)

REST API (FastAPI)

The companion computer can expose the same functionality through a REST API located in the px4_configuration.api package.

Run the API server

# Using the packaged console script
px4-config-api --host 0.0.0.0 --port 8000

# Or via the helper module
python run_api.py

# Or directly with uvicorn
uvicorn px4_configuration.api.main:app --host 0.0.0.0 --port 8000

Endpoints

• GET /health – health check
• POST /calibration/start – start selected calibrations, returns Server-Sent Events (SSE) with progress
• POST /params/upload – upload a .params file (multipart form), SSE progress stream
• POST /sdcard/upload – upload a file (e.g. extras.txt) to the SD card, SSE progress stream
• WS /shell/connect – interactive PX4 shell over WebSocket

All endpoints accept optional port and baudrate (defaults /dev/pixhawk, 2000000). SSE responses emit JSON payloads with keys such as type, message, progress, etc.

Calibration Message Structure

The /calibration/start endpoint returns structured JSON messages via Server-Sent Events (SSE). Each calibration type has a specific message format:

Accelerometer Calibration

The /calibration/start endpoint returns structured JSON messages via Server-Sent Events (SSE). Each calibration type has a specific message format:

{
  "type": "accelerometer_progress",
  "progress": 0.17,
  "status_text": "down side result: [0.020 0.819 -9.750]",
  "pending_orientations": ["back", "front", "left", "right", "up"],
  "current_orientation": "down",
  "current_message": "measuring",
  "result": [0.020, 0.819, -9.750],
  "is_complete": false
}

Fields:

• pending_orientations: List of remaining orientations to measure (e.g., ["back", "front", "left", "right", "up"])
• current_orientation: Currently detected orientation being measured (e.g., "down", "left")
• current_message: Instruction type - "hold_still", "rest_detected", "measuring", "rotate", "orientation_detected", "already_completed", "complete"
• progress: Progress value (0.0 to 1.0)
• result: Measurement result array [x, y, z] when available
• is_complete: Boolean indicating completion

Completion message:

{
  "type": "accelerometer_complete",
  "message": "Accelerometer calibration finished",
  "is_complete": true
}

Magnetometer Calibration

{
  "type": "magnetometer_progress",
  "progress": 0.33,
  "status_text": "right orientation detected",
  "pending_orientations": ["back", "front", "left", "up"],
  "current_orientation": "right",
  "current_message": "orientation_detected",
  "is_complete": false
}

Fields:

• pending_orientations: List of remaining orientations to measure
• current_orientation: Currently detected orientation
• current_message: Instruction type - "rotate", "hold_still", "rest_detected", "motion_detected", "orientation_detected", "already_completed", "complete"
• progress: Progress value (0.0 to 1.0) that increments during rotation
• is_complete: Boolean indicating completion (true when progress >= 1.0)

Completion message:

{
  "type": "magnetometer_complete",
  "message": "Magnetometer calibration finished",
  "is_complete": true
}

Gyroscope Calibration

{
  "type": "gyroscope_progress",
  "progress": 0.5,
  "status_text": null,
  "current_message": "calibrating",
  "is_complete": false
}

Fields:

• progress: Progress value (0.0 to 1.0)
• current_message: "calibrating" during progress, "complete" when done
• is_complete: Boolean indicating completion (true when progress >= 1.0)

Completion message:

{
  "type": "gyroscope_complete",
  "message": "Gyroscope calibration finished",
  "is_complete": true
}

Level Horizon Calibration

{
  "type": "horizon_progress",
  "progress": 0.4,
  "status_text": null,
  "current_message": "calibrating",
  "is_complete": false
}

Fields:

• progress: Progress value (0.0 to 1.0)
• current_message: "calibrating" during progress, "complete" when done
• is_complete: Boolean indicating completion (true when progress >= 1.0)

Completion message:

{
  "type": "horizon_complete",
  "message": "Level horizon calibration finished",
  "is_complete": true
}

Status Messages

General status messages are also emitted:

{
  "type": "status",
  "message": "Starting accelerometer calibration..."
}

{
  "type": "error",
  "message": "Calibration failed: <error details>"
}

{
  "type": "success",
  "message": "All calibrations completed"
}

Notes

• Ensure the vehicle is disarmed and stationary before running calibration or parameter uploads.
• The API and scripts require serial access; add your user to the dialout group if needed.
• Example parameter files and extras.txt live under the configs/ directory.