py-pcapplusplus 1.0.11a0

Python wrapper module for the Pcap++ library using nanobind

py-pcapplusplus

A Python wrapper for the Pcap++ library using nanobind, providing a high-level interface for network packet manipulation, capture, and analysis.

Features

• Read and parse PCAP files
• Create and modify network packets
• Support for multiple protocol layers:
  • Ethernet
  • IPv4/IPv6
  • TCP/UDP
  • ARP
  • VLAN
  • DHCP
  • SOME/IP and SOME/IP-SD
• Raw socket operations for packet capture and injection
• High-performance packet processing

Installation

pip install py-pcapplusplus

Quick Start

Reading PCAP Files

from py_pcapplusplus import Reader, Packet

# Open a PCAP file
reader = Reader("capture.pcap")

# Iterate through packets
for packet in reader:
    # Access different layers
    eth_layer = packet[LayerType.EthLayer]
    ip_layer = packet[LayerType.IPv4Layer]
    
    # Print packet information
    print(packet)

Creating Packets

from py_pcapplusplus import Packet, EthLayer, IPv4Layer, TcpLayer

# Create a new packet
packet = Packet()

# Add layers
eth = EthLayer(src_mac_addr="00:11:22:33:44:55", dst_mac_addr="66:77:88:99:aa:bb")
ip = IPv4Layer(src_addr="192.168.1.1", dst_addr="192.168.1.2")
tcp = TcpLayer(src_port=12345, dst_port=80)

# Add layers to packet
packet / eth / ip / tcp

Packet Capture

from py_pcapplusplus import RawSocket

# Create a raw socket on a specific interface
socket = RawSocket("eth0")

# Capture packets
packets = socket.sniff(timeout=5.0)  # Capture for 5 seconds

# Process captured packets
for packet in packets:
    print(packet)

API Reference

Core Classes

Packet

• get_layer(layer_type): Get a specific layer from the packet
• add_layer(layer): Add a new layer to the packet
• insert_layer(prev_layer, new_layer): Insert a layer after an existing one

Layer Types

• EthLayer: Ethernet layer
• IPv4Layer: IPv4 layer
• IPv6Layer: IPv6 layer
• TcpLayer: TCP layer
• UdpLayer: UDP layer
• ArpLayer: ARP layer
• VlanLayer: VLAN layer
• DhcpLayer: DHCP layer
• SomeIpLayer: SOME/IP layer
• SomeIpSdLayer: SOME/IP-SD layer
• PayloadLayer: Raw payload layer

Protocol-Specific Features

Ethernet Layer

eth = EthLayer(src_mac_addr="00:11:22:33:44:55", dst_mac_addr="66:77:88:99:aa:bb")
eth.src_mac_addr = "00:11:22:33:44:55"  # Set source MAC
eth.dst_mac_addr = "66:77:88:99:aa:bb"  # Set destination MAC
eth.ether_type = True  # Set to IPv4 (False for IPv6)

IPv4 Layer

ip = IPv4Layer(src_addr="192.168.1.1", dst_addr="192.168.1.2")
ip.src_ip = "192.168.1.1"  # Set source IP
ip.dst_ip = "192.168.1.2"  # Set destination IP
ip.ttl = 64  # Set TTL
ip.clear_chksum()  # Clear checksum for recalculation

TCP Layer

tcp = TcpLayer(src_port=12345, dst_port=80)
tcp.syn_flag = True  # Set SYN flag
tcp.ack_flag = True  # Set ACK flag
tcp.rst_flag = False  # Set RST flag

Raw Socket Operations

socket = RawSocket("eth0")

# Send a single packet
socket.send_packet(packet)

# Send multiple packets
socket.send_packets([packet1, packet2, packet3])

# Receive a packet
packet = socket.receive_packet(blocking=True, timeout=1.0)

# Sniff packets
packets = socket.sniff(timeout=5.0)

Dependencies

• Pcap++ library
• nanobind
• Python 3.10

Acknowledgments

• Pcap++ library for the underlying packet processing capabilities
• nanobind for the Python binding framework