py-skyrc-charger 0.0.10

take control of a SkyRC charger via USB

py skyrc charger

this package allows to interface with skyrc chargers using the usb-connection as a more flexible replacement for the Charge Master software. This library was created by reverse engineering the protocol and does not support the complete set of functions yet.

supported devices

this code was developed and tested using the SkyRC T1000: https://www.skyrc.com/t1000 however chargers working with the original Charge Master software are likely to work as well. A list of supported devices is on the download page of Charge Master: https://www.skyrc.com/downloads

tested on linux only, windows should also work, but it is more difficult to setup the usb driver

setup (linux)

fix usb permissions

this might be necessary to run the code without sudo.

create a file /lib/udev/rules.d/50-skyrc-t1000.rules with the following content:

ACTION=="add", SUBSYSTEMS=="usb", ATTRS{idVendor}=="0000", ATTRS{idProduct}=="0001", MODE="660", GROUP="plugdev"

run:

sudo adduser $USER plugdev

how to use

import time
from py_skyrc_charger import Charger, Config, Action, ChargerResponse


def rec_data_callback_sample(data: ChargerResponse):
    print("---")
    print(f"got cmd: {data.command}")
    if data.is_error:
        print(f"error: {data.error_str}")
    else:
        print(f"got data: {data.data}")


if __name__ == "__main__":
    charger = Charger(rec_data_callback_sample, device_index=0)
    charger.connect()

    time.sleep(1.0)

    print("read version...")
    charger.poll_version()
    time.sleep(0.2)

    print("read settings...")
    charger.poll_settings()
    time.sleep(0.2)

    # configure charge program
    conf = Config(port=1,
                  action=Action.BALANCE,
                  cells=3,
                  cur_in=0.1,
                  cur_out=0.5)

    # read values in idle
    start_time = time.time()
    while time.time() - start_time < 5:
        charger.poll_all_vals()
        time.sleep(1.0)

    print("START")
    charger.start_program(conf)

    # read values while charging
    start_time = time.time()
    while time.time() - start_time < 10:
        charger.poll_all_vals()
        time.sleep(1.0)

    print("STOP")
    charger.stop_program(conf.port)

    # read values in idle
    start_time = time.time()
    while time.time() - start_time < 10:
        charger.poll_all_vals()
        time.sleep(1.0)