pyatcommand 0.3.7

An interface for V.25 Hayes AT commands

V.25 AT Command Parser for Python

This was developed due to seeming lack of a generalized AT command processing library in the PyPI ecosystem. Several other implementations exist for more specific purposes but miss certain functions such as non-verbose (V0) mode, echo on/off (E1), or unsolicited result codes.

Client

The client functionality is used to talk to a modem (or anything similar that supports AT commands).

Allows for processing of command/response or receipt of unsolicited result code (URC) emitted by the modem. Also includes an optional CRC validation supported by some modems.

Connection and Initialization

The AtClient instance can be configured with settings using initialization parameters or when using the connect() method. Typical parameters include:

• The serial port name
• baudrate (default 9600)
• echo (default True)
• verbose (default True)
• autobaud (default True) will cycle through supported baudrates trying to attach using a validated AT command

Once the basic AT command returns a valid response, the background listening thread is started and the device gets initialized to a known AT configuration for echo and verbose.

Command/Response

This is the main mode of intended use. The logic flow is as follows:

An AT commmand, with optional timeout, is submitted by calling send_command():

• Uses a threading.Lock to ensure thread safety;
• Clears the last error code;
• Clears the response buffer;
• (Optional) calculates and applies CRC to the command;
• Applies the command line termination character (default \r);
• Sends the command on serial and waits for all data to be sent;
• Sets the pending command state;
• Waits for a response or timeout;
• If no timeout is specified, the default is 0.3 seconds (AT_TIMEOUT).
  • A default timeout can be set with AT_TIMEOUT environment variable or by using the command_timeout init parameter or property.
• A timed-out response returns None;
• A valid response returns an AtResponse object with properties:
  • ok (bool) Indicating a successful result
  • info (str) If the response included text. Multiple lines are separated by newline ('\n'). Any CME/CMS ERROR results will be placed in info when ok is False
  • crc_ok (bool or None) If CRC feature is supported, indicates if the response had a valid CRC.

Unsolicited Response Codes (URC)

Once the connection is established and the AT command parameters configured, a background thread is started to listen for any incoming serial data. Check for unsolicited data using get_urc() which returns the next queued URC.

URCs are assumed to always be prefixed and suffixed by <cr><lf> regardless of the Verbose setting. URCs are also assumed to be a single line i.e. no <cr><lf> in the middle of a URC.

Race conditions can occur when a URC arrives just as a command is being sent resulting in the possibility of the URC(s) being prepended to the response. To avoid such conditions you can ensure Echo is enabled so that responses can be distinguished from unsolicited by the presence of an echo.

CRC Error Detection

An optional CRC-16-CCITT feature is supported that appends a 16-bit error detection mechanism when supported by the device. A crc_sep separator can be defined (default *) that is followed by a 4-character hexadecimal value. The CRC is applied before the command terminator (e.g. AT*3983\r) or after the result code (e.g. \r\nOK\r\n*86C5\r\n).

The command string must be specified in the property crc_enable e.g. client.crc_enable = 'AT%CRC=1'. The corresponding disable string can either be derived as the numeric zero of the enabler, or manually set using the crc_disable property.

Lecacy Client

The original version of this library operated as follows and is supported. This approach can also be used to retrieve full raw responses including all formatting characters.

Legacy Command/Response support

1. AT commmand, with optional timeout, is submitted by a function call send_at_command() which:

   • If a prior command is pending (TBC thread-safe) waits for a ready Event to be set by the completion of the prior command;
   • Clears the last error code;
   • Clears the receive buffer;
   • (Optional) calculates and applies CRC to the command;
   • Applies the command line termination character (default \r);
   • Sends the command on serial and waits for all data to be sent;
   • Sets the pending command state;
   • Calls an internal response parsing function and returns an AtErrorCode code, with 0 (OK) indicating success;
   • If no timeout is specified, the default is 1 second (AT_TIMEOUT).

2. Response parsing:

   • Transitions through states ECHO, RESPONSE, (optional) CRC to either OK or ERROR;
   • If timeout is exceeded, parsing stops and indicates AtErrorCode.ERR_TIMEOUT;
   • (Optional) validation of checksum, failure indicates AtErrorCode.ERR_CMD_CRC;
   • Other modem error codes received will be indicated transparently;
   • Successful parsing will place the response into a buffer for retrieval;
   • Sets the last error code or OK (0) if successful;
   • Clears the pending command state, and sets the ready Event.

3. Retrieval of successful response is done using get_response() with an optional prefix to remove. All other leading/trailing whitespace is removed, and multi-line responses are separated by a single line feed (\n). Retrieval clears the get buffer.

   [!NOTE] Optional parameter clean = False will return the full raw response with all formatting characters.

4. A function last_error_code() is intended to be defined for modems that support this concept (e.g. query S80? on Orbcomm satellite modem).

Legacy Unsolicited Result Codes (URC)

Some modems emit unsolicited codes. In these cases it is recommended that the application checks/retrieves any URC(s) prior to submitting any AT command.

check_urc() simply checks if any serial data is waiting when no AT command is pending, and if present parses until both command line termination and response formatting character have been received or timeout (default 1 second AT_URC_TIMEOUT). URC data is placed in the get buffer and retrieved in the same way as a commmand response.

CRC support

Currently a CCITT-16-CRC option is supported for commands and responses. The enable/disable command may be configured using +CRC=<1|0>. (%CRC=<1|0> also works)

Server (Work in Progress)

The server concept is to act as a modem/proxy replying to a microcontroller.

You register custom commands using add_command() with a data structure that includes the command name and optional callback functions for read, run, test and write operations.

Verbose and Echo features are supported using the standard V and E commands defined in the V.25 spec.

CRC is an optional extended command to support 16-bit checksum validation of requests and responses that can be useful in noisy environments.

Feature considerations

• Repeating a command line using A/ or a/ is not supported;
• No special consideration is given for numeric or string constants, those are left to custom handling functions;
• Concatenation of basic commands deviates from the standard and expects a semicolon separator;

Acknowledgements

The server idea is based somewhat on the ATCommands library which had some shortcomings for my cases including GPL, and cAT but reframed for C++. Many thanks to those developers for some great ideas!