pygruenbeck_cloud
pygruenbeck_cloud is a Python 3 (>= 3.12) library to communicate with the Grünbeck Cloud based Water softeners.
It is intended to be used in custom_component hagruenbeck_cloud for Home Assistant.
Implementation is based on the ioBroker gruenbeck adapter implementation.
Available configuration parameter
| Parameter | Type | Description |
|---|---|---|
| dslt | boolean | Activation of daylight saving time |
| buzzer | boolean | Activation of signal on error |
| buzzer_from | time (HH:MM) | Signal from time |
| buzzer_to | time (HH:MM) | Signal from time |
| push_notification | boolean | Activation of push notifications |
| email_notification | boolean | Activation of email notifications |
| water_hardness_unit | integer | Water hardness Unit (1 = "°dH", 2 = "°fH", 3 = "°e", 4 = "mol/m³", 5 = "ppm") |
| raw_water_hardness | integer | Water hardness value |
| soft_water_hardness | integer | Softwater hardness value |
| mode | integer | Current operation mode (1 = "Eco", 2 = "Comfort", 3 = "Power", 4 = "Individual") |
| mode_individual_monday | integer | Individual mode for Monday |
| mode_individual_tuesday | integer | Individual mode for Tuesday |
| mode_individual_wednesday | integer | Individual mode for Wednesday |
| mode_individual_thursday | integer | Individual mode for Thursday |
| mode_individual_friday | integer | Individual mode for Friday |
| mode_individual_saturday | integer | Individual mode for Saturday |
| mode_individual_sunday | integer | Individual mode for Sunday |
| regeneration_mode | integer | Regeneration mode (0 = "Auto", 1 = "Fixed") |
| regeneration_time_monday_1 | string | Custom regeneration time for Monday 1 (Format: HH:MM) |
| regeneration_time_monday_2 | string | Custom regeneration time for Monday 2 (Format: HH:MM) |
| regeneration_time_monday_3 | string | Custom regeneration time for Monday 3 (Format: HH:MM) |
| regeneration_time_tuesday_1 | string | Custom regeneration time for Tuesday 1 (Format: HH:MM) |
| regeneration_time_tuesday_2 | string | Custom regeneration time for Tuesday 2 (Format: HH:MM) |
| regeneration_time_tuesday_3 | string | Custom regeneration time for Tuesday 3 (Format: HH:MM) |
| regeneration_time_wednesday_1 | string | Custom regeneration time for Wednesday 1 (Format: HH:MM) |
| regeneration_time_wednesday_2 | string | Custom regeneration time for Wednesday 2 (Format: HH:MM) |
| regeneration_time_wednesday_3 | string | Custom regeneration time for Wednesday 3 (Format: HH:MM) |
| regeneration_time_thursday_1 | string | Custom regeneration time for Thursday 1 (Format: HH:MM) |
| regeneration_time_thursday_2 | string | Custom regeneration time for Thursday 2 (Format: HH:MM) |
| regeneration_time_thursday_3 | string | Custom regeneration time for Thursday 3 (Format: HH:MM) |
| regeneration_time_friday_1 | string | Custom regeneration time for Friday 1 (Format: HH:MM) |
| regeneration_time_friday_2 | string | Custom regeneration time for Friday 2 (Format: HH:MM) |
| regeneration_time_friday_3 | string | Custom regeneration time for Friday 3 (Format: HH:MM) |
| regeneration_time_saturday_1 | string | Custom regeneration time for Saturday 1 (Format: HH:MM) |
| regeneration_time_saturday_2 | string | Custom regeneration time for Saturday 2 (Format: HH:MM) |
| regeneration_time_saturday_3 | string | Custom regeneration time for Saturday 3 (Format: HH:MM) |
| regeneration_time_sunday_1 | string | Custom regeneration time for Sunday 1 (Format: HH:MM) |
| regeneration_time_sunday_2 | string | Custom regeneration time for Sunday 2 (Format: HH:MM) |
| regeneration_time_sunday_3 | string | Custom regeneration time for Sunday 3 (Format: HH:MM) |
| maintenance_interval | integer | Maintenance interval in days |
| installer_name | string | Installer name |
| installer_phone | string | Installer phone |
| installer_email | string | Installer email |
| ntp_sync | bool | Get date/time automatically (NTP) |
| fault_signal_contact | bool | Function fault signal contact |
| knx | bool | KNX connection |
| nominal_flow_monitoring | bool | Monitoring of nominal flow |
| disinfection_monitoring | bool | Disinfection monitoring |
| led_ring_mode | int | Illuminated LED ring mode (0 = "deactivated", 1 = "permanent lightning", 2 = "in case of failure", 3 = "in case of operation by user + failure", 4 = "in case of water treatment + operation by user + failure") |
| led_ring_flash_on_signal | bool | Illuminated LED ring flashes for pre-alarm salt supply |
| led_ring_brightness | int | LED ring Brightness [%] |
| residual_capacity_limit | int | Residual capacity limit value [%] |
| current_setpoint | int | Current setpoint [mA] |
| charge | int | Charge [mAmin] |
| interval_forced_regeneration | int | Interval of forced regeneration [days] |
| end_frequency_regeneration_valve | int | End frequency regeneration valve [Hz] |
| end_frequency_regeneration_valve_2 | int | End frequency regeneration valve 2 [Hz] |
| end_frequency_blending_valve | int | End frequency blending valve [Hz] |
| treatment_volume | int | Treatment volume [m³] |
| soft_water_meter_pulse_rate | float | Soft water meter pulse rate [l/Imp] |
| blending_water_meter_pulse_rate | float | Blending water meter pulse rate [l/Imp] |
| regeneration_water_meter_pulse_rate | float | Regeneration water meter pulse rate [l/Imp] |
| capacity_figure_monday | int | Capacity figure Monday [m³x°dH] |
| capacity_figure_tuesday | int | Capacity figure Tuesday [m³x°dH] |
| capacity_figure_wednesday | int | Capacity figure Wednesday [m³x°dH] |
| capacity_figure_thursday | int | Capacity figure Thursday [m³x°dH] |
| capacity_figure_friday | int | Capacity figure Friday [m³x°dH] |
| capacity_figure_saturday | int | Capacity figure Saturday [m³x°dH] |
| capacity_figure_sundday | int | Capacity figure Sunday [m³x°dH] |
| nominal_flow_rate | float | Nominal flow rate [m³/h] |
| regeneration_monitoring_time | int | Regeneration monitoring time [min] |
| salting_monitoring_time | int | Salting monitoring time [min] |
| slow_rinse | float | Slow rinse [min] |
| backwash | int | Backwash [l] |
| washing_out | int | Washing out [l] |
| minimum_filling_volume_smallest_cap | float | Minimum filling volume smallest cap [l] |
| maximum_filling_volume_smallest_cap | float | Maximum filling volume smallest cap [l] |
| minimum_filling_volume_largest_cap | float | Minimum filling volume largest cap [l] |
| maximum_filling_volume_largest_cap | float | Maximum filling volume largest cap [l] |
| longest_switch_on_time_chlorine_cell | int | Longest switch-on time Cl cell [min] |
| maximum_remaining_time_regeneration | int | Maximum remaining time regeneration [min] |
| language | int | Current language (1 = "German", 2 = "English", 3 = "French", 4 = "Italian", 5 = "Dutch", 6 = "Spanish", 7 = "Russian", 9 = "Danish") |
| programmable_output_function | int | Programmable output function |
| programmable_input_function | int | Programmable input function |
| reaction_to_power_failure | int | Reaction to power failure > 5 min |
| chlorine_cell_mode | int | Activate/deactivate chlorine cell |
| blending_monitoring | int | Blending monitoring |
| system_overloaded | int | System overloaded |
And these are additional parameter which are provided by the API, but their meaning and/or value is not known:
| Parameter | Type |
|---|---|
| ppressurereg | int |
Feel free to open an issue if you know the meaning of them and their possible values.
1 maintainer
Metadata
1 maintainer
Release files for pygruenbeck-cloud 1.3.3
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | |
|---|---|---|---|
| pygruenbeck_cloud-1.3.3.tar.gz | 26.7 kB | Details |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Reset |
|---|---|---|---|---|
| pygruenbeck_cloud-1.3.3-py3-none-any.whl | Python 3 | none | any | Details |
Total release size: 50.0 kB
Release files / pygruenbeck_cloud-1.3.3.tar.gz
| Download URL | pygruenbeck_cloud-1.3.3.tar.gz |
|---|---|
| Size | 26.7 kB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
3f353631755e5cd870db606cd8879a80a132fd612670cd9742a21599584692af
|
|
BLAKE2b-256 checksum How to use checksums |
20b12a78a6f71a5a10fdaf1c57003c5384ce27af690520cbe201eb8d2b7034a6
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/6.1.0 CPython/3.13.5
|
Release files / pygruenbeck_cloud-1.3.3-py3-none-any.whl
| Download URL | pygruenbeck_cloud-1.3.3-py3-none-any.whl |
|---|---|
| Size | 23.3 kB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
8311f93524f0a3e6bc2a90ff4c3f9babc129e5204f9f3c7feb265414b46070f3
|
|
BLAKE2b-256 checksum How to use checksums |
a7dc6cf72234d979827d4f4a2c5580cea079d6d90c677749b85e6cd046680be6
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/6.1.0 CPython/3.13.5
|
