pynrfjprog 10.15.4.post1

A simple Python interface for the nrfjprog functionality

pynrfjprog

Python wrapper around the nrfjprog dynamic link libraries (DLL). Use of this API allows developers to program/debug nRF SOC and SIP devices from the interpreter, write simple scripts for a more efficient development work flow, or write automated test frameworks. It can also be used to create applications in Python (i.e. command-line tools).

Use-cases

• Maximizing development efficiency: i.e. a script to perform various operations every time an application is built and run (could be hooked into a Makefile or automated build system etc...).
• Automated testing: Testing Production Programming tools on nRF5 using pynrfjprog.

Dependencies

"""
Detailed below is how our software is stacked. Each layer depends on the layer below.
"""
pynrfjprog  # Imports and wraps the nrfjprog DLL in Python.
nrfjprogdll # A DLL that wraps SEGGER's JLink API for nRF5 devices.
JLinkARMDLL # A DLL provided by SEGGER that works with SEGGER debuggers. Performs all low level operations with target device.

• J-Link Software and Documentation Pack will install the JLink libraries pynrfjprog depends on in the correct installation directory.
• The nrfjprog libraries are installed with pynrfjprog and are included in pynrfjprog/OPERATING_SYSTEM/.

Structure

pynrfjprog
  ├── pynrfjprog
  │     ├──__init__.py    # Package marker to make pynrfjprog a module. Also defines the version number
  │     ├── API.py        # Legacy name of LowLevel.py. It's kept for backward support
  │     ├── APIError.py   # Wrapper for the error return codes of the DLL
  │     ├── Hex.py        # Hex parsing library
  │     ├── HighLevel.py  # Wrapper for the nrfjprog highlevel DLL
  │     ├── JLink.py      # Finds the JLinkARM DLL required by pynrfjprog
  │     ├── LowLevel.py   # Wrapper for the nrfjprog DLL, previously API.py
  │     ├── MultiAPI.py   # Allow multiple devices (up to 128) to be programmed simultaneously with a LowLevel API
  │     ├── lib_armhf
  │     │   └── # armhf nrfjprog libraries
  │     ├── lib_x64
  │     │   └── # 64-bit nrfjprog libraries
  │     ├── lib_x86
  │     │   └── # 32-bit nrfjprog libraries
  │     ├── docs
  │     │   └── # Header files of the nrfjprog DLL to provide in-depth documentation of the functions that are wrapped
  │     └── examples
  │         └── # Example scripts to show off the different APIs
  ├── LICENSE
  ├── README.md
  ├── requirements.txt
  ├── setup.cfg
  └── setup.py
  
  
    

Getting started

To install latest release from PyPI:

pip install pynrfjprog

To install from source navigate to pynrfjprog:

python setup.py install

Open the Python interpreter and connect nRF device to PC:

from pynrfjprog import LowLevel

with LowLevel.API('NRF52') as api:
    api.enum_emu_snr()
    api.connect_to_emu_without_snr()
    api.erase_all()
    api.write_u32(ADDRESS, DATA, IS_FLASH)
    api.disconnect_from_emu()

To work with multiple nRF devices at once:

import LowLevel

api = LowLevel.API('NRF52')
api.open()

api2 = LowLevel.API('NRF52')
api2.open()

api3 = LowLevel.API('NRF51')
api3.open()

api.close()
api2.close()
api3.close()

To program hex files using the HighLevel API:

from pynrfjprog import HighLevel

with HighLevel.API() as api:
    snrs = api.get_connected_probes()

    # To program J-Link probe at snr <snr>:
    with HighLevel.DebugProbe(api, <snr>) as probe:
        probe.program(<hex_file>)

    # To program MCUBoot target at serial port <serial>:
    with HighLevel.MCUBootDFUProbe(api, <serial>) as probe:
        probe.program(<hex_file>)

    # To update LTE modem connected to J-Link probe at snr <snr>:
    with HighLevel.IPCDFUProbe(api, <snr>, HighLevel.CoProcessor.CP_MODEM) as probe:
        probe.program(<zip_file>, HighLevel.ProgramOptions(verify = HighLevel.VerifyAction.VERIFY_HASH))

Note: Only one HighLevel API can be instantiated and opened at a time. Several HighLevel probes can be opened from the same API at the same time.

Contributing

Contributing is encouraged along with the following coding standards.

• Google Python Style Guide
• http://www.clifford.at/style.html
• Semantic versioning