pynuttx 0.0.7

Comprehensive Python debugging and analysis toolkit for NuttX RTOS - includes GDB extensions, memory analysis, crash diagnostics, trace parsing, and remote debugging capabilities

PyNuttX - NuttX/Vela GDB Extension Toolkit

A comprehensive Python-based GDB debugging toolkit for NuttX RTOS, providing powerful extensions for thread analysis, memory debugging, crash diagnostics, filesystem inspection, and much more.

Production Ready: Extensively used in Xiaomi Vela OS for embedded systems debugging, crash analysis, and performance profiling.

---

📋 Table of Contents

• Introduction
• Installation & Setup
• Loading GDB Extensions
• Usage Scenarios
• Command Reference
• Quick Start Examples
• Advanced Features
• FAQ
• Contributing

---

🎯 Introduction

PyNuttX implements numerous custom GDB commands under nuttx/tools/pynuttx/, primarily focused on:

• Thread Management: Thread inspection, backtrace, context switching
• Memory Analysis: Memory dumps, leak detection, heap validation
• System Inspection: Process status, filesystem, network, sensors, and more

Key Features

✅ 100+ Custom GDB Commands covering all aspects of embedded debugging ✅ Post-Mortem Analysis via coredump and memory dump files ✅ Multi-Architecture Support: ARM, RISC-V, Xtensa, Tricore, and more ✅ Production Tested in commercial IoT products (Xiaomi Vela OS) ✅ Extensible Framework for custom command development

---

🚀 Installation & Setup

Prerequisites

GDB Version Requirement:

• GDB 11 or higher with python enabled is required

# Use prebuilt gdb-multiarch (recommended)
trunk/prebuilts/gcc/linux/gdb-multiarch/bin/gdb-multiarch

# Special architectures require specific GDB:
# - Tricore: prebuilts/gcc/linux/tricore/bin/tricore-gdb
# - Xtensa: xtensa-esp32s3-elf-gdb (xt-gdb does NOT support Python extensions)

⚠️ Note: Some vendor toolchains may have compilation issues causing missing libpython support, preventing Python module usage.

Install Dependencies

Install required Python packages:

# Install dependencies (Linux)
/usr/bin/python3 -m pip install -r nuttx/tools/pynuttx/requirements.txt

# Or via pip if pynuttx is installed
pip install pynuttx

Important Notes

1. Code-Tool Compatibility: ⚠️ Always match your code version with tool version

   • Don't use stable tools to analyze dev branch code
   • Keep tool and firmware in sync

2. Architecture-Specific Tools: Use the correct GDB for your target architecture

   • Tricore: tricore-gdb
   • Xtensa: xtensa-esp32s3-elf-gdb (see reference)
   • ARM: gdb-multiarch or arm-none-eabi-gdb

---

📥 Loading GDB Extensions

Method 1: Load via -ex Parameter (Recommended)

# Start GDB with automatic loading
gdb-multiarch nuttx/vela_ap.elf -ex "source nuttx/tools/pynuttx/gdbinit.py"

# Or load manually in GDB shell
(gdb) source nuttx/tools/pynuttx/gdbinit.py

Method 2: Import as Python Module

# Set PYTHONPATH so Python can find the module
export PYTHONPATH=/myworkspace/nuttx/tools/pynuttx:$PYTHONPATH

# Option 1: Load during GDB startup
gdb-multiarch nuttx/nuttx.elf -ex "py import nxgdb"

# Option 2: Import after GDB starts
(gdb) py import nxgdb

Verify Installation

# Check available custom commands
(gdb) help user-defined

# Get help for specific command
(gdb) memdump --help
(gdb) info nxthread --help

---

🎪 Usage Scenarios

PyNuttX works in multiple debugging contexts:

Scenario	Description	Use Case
Online Debugging	Live device via JTAG/SWD	JLink, OpenOCD, TRACE32
GDB Stub	Serial/USB debugging	Embedded GDB stub on target
Post-Mortem	Crash dump analysis	Load memory dumps via gdbserver.py
Coredump	ELF coredump files	Analyze with gdb <elf> <coredump>

Example: Connect to Live Target

# Via OpenOCD (JTAG/SWD)
openocd -f interface/jlink.cfg -f target/stm32f4x.cfg &
gdb-multiarch nuttx -ex "target remote :3333" -ex "source tools/pynuttx/gdbinit.py"

# Via Serial GDB Stub
gdb-multiarch nuttx -ex "target remote /dev/ttyUSB0" -ex "source tools/pynuttx/gdbinit.py"

Example: Post-Mortem Analysis

# Start gdbserver with memory dumps
python3 tools/pynuttx/gdbserver.py \
    -a arm \
    -e nuttx.elf \
    -r ram.bin:0x20000000 psram.bin:0x60000000 \
    -p 6667

# Connect and analyze
gdb-multiarch nuttx.elf -ex "target remote :6667" -ex "source tools/pynuttx/gdbinit.py"

---

📚 Command Reference

🧵 Thread & Scheduling

Command	Description
info nxthread	Display NuttX threads with Vela-specific data (replaces info threads for better NuttX integration)
nxthread <id>	Switch to specific thread context
setregs <addr>	Restore register context from saved state
deadlock	Detect deadlock conditions
critmon	Critical section monitor (same as device critmon)
ps	Process status (same as device ps)
crash busyloop	Detect busy-loop threads

Example:

(gdb) info nxthread
  PID GROUP PRI POLICY   TYPE    NPX STATE   EVENT      SIGMASK  STACKBASE  STACKSIZE   USED  FILLED  COMMAND
    0     0   0 FIFO     Kthread -   Running            00000000 0x00000000         0      0    0.0%!  Idle_Task
    1     1 100 RR       Task    -   Waiting Semaphore  00000000 0x20600000      2048    824   40.2%   nsh_main

(gdb) nxthread 1
(gdb) bt

💾 Memory Management

Command	Description
memdump	Dump memory allocation info (same as device memdump)
memleak	Detect memory leaks by analyzing unreachable allocations
memcheck	Verify heap integrity and core data structures
memfind <pattern>	Search for pattern in heap/bss/data (auto address range)
kasan	KASAN helper to check address tag accessibility
memclassify	Classify memory by backtrace to identify module usage
mm visualize	Visualize memory state with size distribution charts
dump ram	Export memory data to file
mm range	Show memory regions in current system
crash stackoverflow	Detect stack overflow conditions

Example:

# Show top 20 memory consumers without backtrace (faster)
(gdb) memdump --top 20 --no-backtrace

# Detect memory leaks
(gdb) memleak
Searching for leaked memory, please wait a moment...
Leak catch!, use '*' mark pid is not exist:
   CNT   PID        Size    Sequence    Address Callstack
    34    30         256        8810 0x3d52f080  [0x00c3210e0] <malloc+12>
...

# Check heap integrity
(gdb) mm check

# Visualize memory fragmentation
(gdb) mm visualize

🖥️ System & Diagnostics

Command	Description
foreach list	Traverse NuttX linked lists
tlsdump	Dump and verify TLS info / task info integrity
nxgcore	Pull device coredump (wraps GDB's gcore)
free	Show memory info (same as device free)
uname	Display firmware version
irqinfo	Show IRQ statistics (same as device irqinfo)
dmesg	Display kernel log (ramlog)
wdog	Show registered watchdog timer info
worker	Show registered worker info
noteram	View note trace data, perform notedump operations
notesnap	View task switching state before crash
target nxstub	Connect to gdbserver via Vela proxy (native GDB thread support)
diagnose	Run all diagnostic commands, generate JSON report
circbuf	View circular buffer state (libc/misc/lib_circbuf.c)
pmconfig	View PM configuration info
elfimport	Import ELF symbols
crash thread	Identify which thread caused the crash

Example:

# View kernel log
(gdb) dmesg

# Generate comprehensive diagnostic report
(gdb) diagnose

# Check system info
(gdb) uname
(gdb) free

🗂️ Filesystem

Command	Description
fdinfo	Show open file descriptors per task
mount	Display mount information
foreach inode	Traverse inode tree
info shm	Show shared memory usage
info yaffs	View YAFFS partition context
info romfs	View ROMFS partition context
info fatfs	View FAT filesystem partition context
info lrofs	View LROFS partition context

Example:

# Check open files
(gdb) fdinfo

# View mount points
(gdb) mount

# Inspect filesystem partition
(gdb) info fatfs /dev/mmcsd0

🌐 Network & Connectivity

Command	Description
netstats	Print IOB and protocol/socket info
netcheck	Run network diagnostics
btsocket	Print Bluetooth IPC server/client cache queue
btdev	Print Bluetooth adapter BLE/BREDR device info
bttimeval	Print Bluetooth thread peak timestamp
btstack	Print protocol stack list (e.g., GATT pending list)
btsnoop	Convert Bluetooth /dev/tty circular buffer to HCI log
lyrainfo	Display Lyra Lite connection, mesh, and transmission info

Example:

# Network statistics
(gdb) netstats

# Bluetooth diagnostics
(gdb) btdev
(gdb) btsnoop /dev/ttyBT0 output.hci

🎨 Graphics (LVGL)

See GDB Plug-In

Command	Description
dump cache image	View image cache memory
dump cache image_header	View image header cache memory
info draw_unit	View current draw unit info, verify rendering context
info style	View LVGL object style and type information
dump obj	Display LVGL object tree
show fb	Display framebuffer content

📡 RPC & IPC

Command	Description
rpmsgservice	View RPMSG service information

📊 Sensors

Command	Description
uorb	View /dev/uorb/ node subscriptions and publications

🎬 Media

Command	Description
mediadump	View pipeline filter EOF state and internal dump data

📱 Application Frameworks

Command	Description
dump aiotmemory	Print Quick App JS memory usage

🔧 Development Tools

Command	Description
profile	Analyze Python function call time (performance profiling)
viztracer	Capture Python trace data, view with Perfetto
time	Measure Python tool execution time (like shell time)
addr2line	Convert addresses/variables/expressions to backtrace
hexdump	Dump memory at address with printable characters
debugpy	Debug Python code in IDE

---

🚀 Quick Start Examples

Example 1: Memory Leak Detection

# Connect to target or load memory dump
gdb-multiarch nuttx.elf -ex "target remote :3333" -ex "source tools/pynuttx/gdbinit.py"

# Run memory leak detection
(gdb) memleak
Searching for leaked memory, please wait a moment
Searching global symbol in: /path/to/nuttx.elf
Search all memory use 28.98 seconds

Leak catch!, use '*' mark pid is not exist:
   CNT   PID        Size    Sequence    Address Callstack
    34    30         256        8810 0x3d52f080
        [0x00c3210e0] <malloc+12>
        [0x00c47c904] <lv_malloc+6>
        ...

Alloc 44 count, have 8 some backtrace leak, total leak memory is 10112 bytes

Example 2: Crash Analysis

# After a crash, connect to device
gdb-multiarch nuttx.elf -ex "target remote /dev/ttyUSB0" -ex "source tools/pynuttx/gdbinit.py"

# View kernel log
(gdb) dmesg
[  123.456] Assertion failed at file:line

# Check thread status
(gdb) info nxthread

# Identify crashing thread
(gdb) crash thread

# Run comprehensive diagnostics
(gdb) diagnose

# Check for memory corruption
(gdb) memcheck

# Detect stack overflow
(gdb) crash stackoverflow

Example 3: Post-Mortem Analysis

# 1. Collect memory dumps from crashed device
(gdb) dump memory ram.bin 0x20000000 0x20100000
(gdb) dump memory psram.bin 0x60000000 0x64000000

# 2. Start gdbserver with memory files
python3 tools/pynuttx/gdbserver.py \
    -a arm \
    -e nuttx.elf \
    -r ram.bin:0x20000000 psram.bin:0x60000000 \
    -p 6667

# 3. Connect and analyze
gdb-multiarch nuttx.elf \
    -ex "target remote :6667" \
    -ex "source tools/pynuttx/gdbinit.py"

# 4. Analyze the crash
(gdb) info nxthread
(gdb) bt
(gdb) memdump --top 20

Example 4: Filesystem Debugging

# Check open file descriptors
(gdb) fdinfo

# View mount points
(gdb) mount

# Inspect filesystem details
(gdb) info fatfs /dev/mmcsd0

# Traverse inode tree
(gdb) foreach inode

Example 5: Network Debugging

# View network statistics
(gdb) netstats

# Run network diagnostics
(gdb) netcheck

# Check Bluetooth status
(gdb) btdev
(gdb) btsocket

---

🎓 Advanced Features

Save Command Output to File

# Use pipe to save output
(gdb) pipe info nxthread | tee output.log
(gdb) pipe memdump | tee memdump.txt

View All Custom Commands

# List all user-defined commands
(gdb) help user-defined

# Get help for specific command
(gdb) <command> --help

GDB Proxy for Native Thread Support

# Connect via nxstub for better thread awareness
(gdb) target nxstub --proxy :1234 # For example, connect to qemu
(gdb) info threads  # Now shows NuttX threads correctly

Comprehensive Diagnostics

# Run all diagnostic commands and generate JSON report
(gdb) diagnose

# This automatically runs:
# - Thread analysis
# - Memory checks
# - System state inspection
# - Network diagnostics
# - And more...

---

❓ FAQ

Q: How do I add my own custom commands?

A: Follow the GDB Python API to create custom commands.

Example:

import gdb

class MyCommand(gdb.Command):
    """My custom command description"""

    def __init__(self):
        super().__init__("mycommand", gdb.COMMAND_USER)

    def invoke(self, arg, from_tty):
        print("Hello from my command!")

MyCommand()

Save as mycommand.py and load:

(gdb) source mycommand.py
(gdb) mycommand

Q: Can thread functionality display in VSCode or other frontends?

A: Not yet perfectly. Current implementation replaces same-named commands which doesn't perfectly adapt to frontend tools. Frontend adaptation is under development.

Q: GDB version error or Python module not found?

A:

1. Ensure GDB 11+ is installed
2. Check GDB Python support: gdb --batch -ex "python import sys; print(sys.version)"
3. Use prebuilt GDB from Vela repository
4. Install dependencies: pip install -r requirements.txt

Q: Commands are slow on embedded target?

A: Use post-mortem analysis instead:

1. Dump memory from target
2. Use gdbserver.py to load dumps
3. Analyze offline (much faster!)

Q: How to debug multi-core systems?

A:

1. Dump memory from each core separately
2. Load each core's memory with corresponding ELF file
3. Use separate GDB sessions or load all in one gdbserver instance

Q: Code and tool version mismatch?

A: ⚠️ Always keep tool and firmware versions synchronized!

• Use same branch for both code and tools
• Don't mix stable branch tools with dev branch code

---

🤝 Contributing

Contributions are welcome! PyNuttX is part of the Apache NuttX project.

Development Setup

# Clone repository
git clone https://github.com/apache/nuttx.git
cd nuttx/tools/pynuttx

# Install in development mode
pip install -e .

# Install development dependencies
pip install -r requirements.txt

Adding New Commands

1. Create your command in appropriate module under nxgdb/
2. Add documentation in docs/
3. Add tests in tests/
4. Submit pull request

See Contributing Guide for details.

---

📖 Resources

• Documentation: See docs/ directory for detailed command documentation
• NuttX Website: https://nuttx.apache.org/
• Issue Tracker: https://github.com/apache/nuttx/issues
• Mailing List: https://nuttx.apache.org/community/

---

📄 License

Licensed under the Apache License, Version 2.0. See LICENSE for details.

---

🙏 Acknowledgments

Maintained by the Apache NuttX community and extensively developed by the Xiaomi Vela team.

Special Thanks To:

• All contributors and maintainers
• Xiaomi Vela OS team for production testing and enhancements
• The embedded systems community

---

For support and questions, please refer to the NuttX Documentation or contact the community via mailing lists.