pyporscheconnectapi (bartolije fork)

A python library for Porsche Connect API

Fork of CJNE/pyporscheconnectapi by Johan Isacsson and its contributors, maintained by bartolije. It is published on PyPI as pyporscheconnectapi-bartolije (the module is still imported as pyporscheconnectapi) and is used by the bartolije/ha-porscheconnect Home Assistant integration. Fixes that also apply upstream are sent back as pull requests.

This library will let you access your car equipped with Porsche Connect. It does not work with the predecessor Porsche Car Connect. Porsche Connect is available for the following Porsche models:

• Boxster & Cayman (718)
• 911 (from 992)
• Taycan
• Panamera (from 2021, G2 PA)
• Macan (EV, from 2024)
• Cayenne (from 2017, E3)

You can also take a look here, select your model and see if your model has support for Porsche Connect: https://connect-store.porsche.com/

A Porsche Connect subscription alse needs to be active for it to work.

NOTE: This work is not officially supported by Porsche and functionality can stop working at any time without warning.

Installation

The easiest method is to install using pip3/pip (venv is also a good idea).

pip install pyporscheconnectapi-bartolije

to update to the latest version

pip install pyporscheconnectapi-bartolije -U

Setup will add a cli under the name porschecli, see below for usage.

CLI usage

A simple cli is provided with this library, it will cache tokens to a file to speed up invocations.

If no email or password is supplied as input arguments and no config file with those details is found you will be prompted.

usage: porschecli [-h] [-d] [-j] [-e EMAIL] [-p PASSWORD] [-s SESSION_FILE] [--nowait]
                  {list,token,capabilities,currentoverview,storedoverview,trip_statistics,pictures,location,climatise_on,climatise_off,direct_charge_on,direct_charge_off,flash_indicators,honk_and_flash,lock_vehicle,unlock_vehicle,vehicle_closed,doors_and_lids,tire_pressure_status,tire_pressures,chargingprofile}
                  ...

Porsche Connect CLI

positional arguments:
  {list,token,capabilities,currentoverview,storedoverview,trip_statistics,pictures,location,climatise_on,climatise_off,direct_charge_on,direct_charge_off,flash_indicators,honk_and_flash,lock_vehicle,unlock_vehicle,vehicle_closed,doors_and_lids,tire_pressure_status,tire_pressures,chargingprofile}
                        command help
    battery             Prints the main battery level (BEV)
    capabilities        Get vehicle capabilities
    chargingprofile     Update parameters in configured charging profile
    climatise_off       Stop remote climatisation
    climatise_on        Start remote climatisation
    connected           Check if vehicle is on-line
    currentoverview     Get stored overview for vehicle
    direct_charge_off   Disable direct charging
    direct_charge_on    Enable direct charging
    doors_and_lids      List status of all doors and lids
    flash_indicators    Flash indicators
    honk_and_flash      Flash indicators and sound the horn
    location            Show location of vehicle
    lock_vehicle        Lock vehicle
    pictures            Get vehicle pictures url
    storedoverview      Poll vehicle for current overview
    tire_status         Check if tire pressure are ok
    tire_pressures      Get tire pressure readings
    trip_statistics     Get trip statistics from backend
    unlock_vehicle      Unlock vehicle
    vehicle_closed      Check if all doors and lids are closed

options:
  -h, --help            show this help message and exit
  -d, --debug
  -j, --json            output in JSON format
  -e EMAIL, --email EMAIL
  -p PASSWORD, --password PASSWORD
  -s SESSION_FILE, --sessionfile SESSION_FILE

Config file (for CLI)

A config file is searched for in ~/.porscheconnect.cfg and ./.porscheconnect.cfg The format is:

[porsche]
email=<your email>
password=<your password>
session_file=<file to store session information>

Library usage

Install pyporscheconnectapi-bartolije using pip (requires python >= 3.10)

Example client usage

Please refer to the examples provided in the repository.

Resuming a captcha challenge from another process

Auth0 sometimes requires a captcha during login. The challenge is bound to the session cookies of the HTTP client that started it — since 0.4.0 the PorscheCaptchaRequiredError carries everything needed to resume the login elsewhere (another process, after a restart, ...):

from pyporscheconnectapi.connection import Connection
from pyporscheconnectapi.exceptions import PorscheCaptchaRequiredError

try:
    connection = Connection(email, password)
    await connection.get_token()
except PorscheCaptchaRequiredError as err:
    persist(err.captcha, err.state, err.cookies)  # cookies is JSON-compatible

# ... later, in a fresh process, once the captcha is solved:
connection = Connection(
    email, password,
    captcha_code=solved_code, state=state, cookies=cookies,
)
await connection.get_token()

Treat err.cookies like a password: it is the Auth0 session secret.

Transient error handling

Requests to the Porsche API — including the OAuth2 token endpoints — retry transparently on transient failures (HTTP 429/502/503/504 and network errors) with capped exponential backoff, honouring Retry-After.