pytest-clab 0.1.0

A pytest plugin for managing containerlab topologies in tests.

pytest-clab

pytest-clab is authored by Thomas Bamihas, governed as a benevolent dictatorship, and distributed under the Apache 2.0 license.

Introduction

While containerlab simplifies spinning up network topologies, integrating it into test workflows still requires boilerplate for deployment, teardown, and node interaction. This plugin provides a convenient pytest fixture to manage containerlab topologies with automatic lifecycle management.

Features

• Lab lifecycle management: Deploy and destroy containerlab topologies directly from pytest.
• Multiple lab support: Interact with multiple labs within a single pytest session, for tests that depend on more than one topology.
• Topology readiness checks: Verify dependent labs are ready before running tests.
• Dynamic node inventory: Retrieve node addresses and connection parameters at test runtime instead of hardcoding them in tests.
• Containerlab CLI access: Run containerlab commands from tests for operations not covered by plugin helpers.

Installation

pip install pytest-clab

Requirements: containerlab CLI must be installed and in PATH.

Quickstart

@pytest.fixture(scope="session")
def lab(clab):
    return clab("topology.clab.yaml")

@pytest.mark.parametrize("node_name", ["node1", "node2"])
def test_mgmt_interface_status(lab, node_name):
    # GIVEN a lab node
    node = lab.nodes[node_name]

    # GIVEN netmiko params
    params = {
        "host": node.ipv4_address,
        "username": os.getenv("SSH_USERNAME"),
        "password": os.getenv("SSH_PASSWORD"),
        "device_type": "nokia_srl",
    }

    # WHEN fetching mgmt status
    with netmiko.ConnectHandler(**params) as conn:
        output = conn.send_command("show interface mgmt0 brief")

    # THEN expect mgmt0 to be up
    assert "up" in output

Working with Topologies and Nodes

ClabTopology

The clab fixture is a factory that creates ClabTopology instances.

Properties:

• name - Lab name as reported by containerlab
• topology_path - Path to the topology YAML file
• nodes - Collection of nodes

Methods:

• cmd(command, parse_json=False) - Execute any containerlab command, optionally parse JSON output

output = lab.cmd("inspect -f json", parse_json=True)

Node Startup Readiness

The plugin automatically polls containerlab inspect and returns only after all nodes report state: "running".

• command_timeout controls timeout per containerlab CLI call.
• startup_timeout controls total startup polling budget.

Service-level readiness (SSH, NETCONF, gNMI, app-level) checks are environment-specific and performed in test logic.

ClabNodes

The nodes property is a collection that supports flexible access patterns.

Methods:

• lab.nodes["name"] - Access a node by short name
• "name" in lab.nodes - Check if a node exists
• len(lab.nodes) - Get the number of nodes
• for node in lab.nodes - Iterate over all nodes
• filter_by_kind(kind) - Filter nodes by kind

for node in lab.nodes:
    print(node.short_name, node.ipv4_address)

ClabNode

Each node is an immutable dataclass with the following attributes.

Attributes:

• short_name - Node name without lab prefix (e.g., "leaf1")
• name - Full container name (e.g., "clab-mylab-leaf1")
• lab_name - Name of the lab
• kind - Node kind (e.g., "linux", "nokia_srlinux")
• image - Container image
• state - Container state (e.g., "running")
• status - Container status from containerlab (e.g., "healthy")
• ipv4_address - Management IPv4 address
• ipv6_address - Management IPv6 address
• container_id - Docker container ID
• properties - Dictionary containing additional containerlab node properties not listed above

node = lab.nodes["leaf1"]
print(f"{node.short_name} ({node.kind}): {node.ipv4_address}")

Examples

Keep Running Mode

@pytest.fixture(scope="session")
def lab(clab):
    return clab("topology.clab.yml", keep_running=True)

JSON Output

def test_json_output(lab):
    result = lab.cmd("inspect -f json", parse_json=True)
    assert isinstance(result, dict)

Filter by Node Kind

def test_filter_nodes(lab):
    srlinux_nodes = lab.nodes.filter_by_kind("nokia_srlinux")
    linux_nodes = lab.nodes.filter_by_kind("linux")
    assert len(srlinux_nodes) + len(linux_nodes) == len(lab.nodes)

Dynamic Validation Example

This example uses subtests for per-peer test reporting.

def test_bgp_neighbors(lab, subtests):
    node = lab.nodes["router1"]
    # Use any library to connect to the node (e.g., ncclient, scrapli, netmiko)
    with connect(host=node.ipv4_address, ...) as conn:
        neighbors = conn.get(filter=BGP_NEIGHBOR_FILTER).data_xml

    for neighbor in neighbors:
        with subtests.test(peer=neighbor.find("peer-address").text):
            assert neighbor.find("state").text == "established"

Configuration

Environment Variables

CONTAINERLAB_EXECUTABLE Path to containerlab executable (default: containerlab)

CONTAINERLAB_EXECUTABLE=/usr/local/bin/clab pytest

Fixture Parameters

topology: Path to containerlab topology YAML file (required)

lab = clab("topology.clab.yml")

sudo: Run containerlab commands with sudo (default: False)

lab = clab("topology.clab.yml", sudo=True)

keep_running: Keep lab running at session end (default: False)

lab = clab("topology.clab.yml", keep_running=True)

command_timeout: Timeout in seconds for each containerlab command (default: 300)

lab = clab("topology.clab.yml", command_timeout=600)

startup_timeout: Timeout in seconds for startup-state polling (default: 30)

lab = clab("topology.clab.yml", startup_timeout=60)

Exceptions

The plugin provides a hierarchy of exceptions for error handling:

• ClabError: Base exception for all pytest-clab errors
• TopologyNotFoundError: Topology file does not exist
• ContainerlabNotFoundError: containerlab executable not found in PATH
• DeploymentError: Topology deployment failed
• InspectError: Failed to inspect running topology
• CommandError: A containerlab command failed
• NodeFailedError: A node entered a terminal failed state during startup

Versioning

Releases will follow semantic versioning (major.minor.patch). Before 1.0.0, breaking changes can be included in a minor release, therefore we highly recommend pinning this package.

Contributing

Suggest a feature or report a bug. Read our developer guide.

License

pytest-clab is distributed under the Apache 2.0 license.