pytest-querycount

Fail your tests when they run too many SQL queries.

An endpoint that quietly grows from 2 queries to 200 does not break any test. It just gets slower, until one day it is slow enough to notice. This plugin turns that drift into a red test.

@pytest.mark.max_queries(2)
def test_billing_summary(db):
    assert len(serialise(db)) == 12

Add a lazy-loaded relationship to that serialiser and the test fails on the next CI run, naming the repeated query and the line of your code that caused it.

Install

pip install "pytest-querycount[sqlalchemy]"

Requires Python 3.10+, pytest 8+, and SQLAlchemy 2.x. There is nothing to configure: the plugin instruments every engine your suite creates, sync or async.

What it gives you

A query budget

@pytest.mark.max_queries(2)
def test_billing_summary(db):
    assert len(serialise(db)) == 12

When the serialiser loops, you get this -- real output, not an illustration:

_____________________________ test_billing_summary _____________________________

E   TooManyQueriesError: test_billing_summary ran 13 queries, budget is 2 (11 over).

    Repeated query shapes -- most likely where the extra queries come from:
      12x  SELECT invoices.id, invoices.customer_id, invoices.cents FROM invoices WHERE ? = invoices.custome…
          from test_billing.py:10 (12x)

    13 queries in 0.1ms
            1. [   0.02ms] SELECT customers.id, customers.email FROM customers
                            from test_billing.py:11
         2-13. [   0.06ms] 12x SELECT invoices.id, invoices.customer_id, invoices.cents FROM invoices WHERE …
                            from test_billing.py:10

Three things to notice, because they are the reason this is a package and not a snippet:

• The diagnosis comes first. 12x on one query shape, before any listing. In a CI log you get the culprit in the first three lines.
• test_billing.py:10 is your code, not a line inside SQLAlchemy. The plugin walks up the stack past the ORM to find the line that actually caused the query.
• The twelve identical queries print as one line. Twelve copies of the same SELECT tell you nothing that 12x does not, and they would push the useful lines off the screen.

N+1 detection without picking a number

Sometimes you do not want to choose a budget, you just want to assert that nothing is looping.

@pytest.mark.no_n_plus_one
def test_billing_summary(db):
    assert len(serialise(db)) == 12

This groups queries by shape -- WHERE id = 42 and WHERE id = 43 are the same shape -- and fails when one shape repeats. By default it looks only at SELECTs, since repeated SAVEPOINTs are just how transactions work.

@pytest.mark.no_n_plus_one(threshold=5)             # tolerate up to 4 repeats
@pytest.mark.no_n_plus_one(kinds=("select", "insert"))
@pytest.mark.no_n_plus_one(kinds=None)              # consider every statement

Missing indexes (PostgreSQL)

@pytest.mark.no_seq_scan
def test_customer_search(db):
    assert len(find_by_city(db, "city3")) == 1

_____________________________ test_customer_search _____________________________

E   SeqScanError: test_customer_search ran 1 query that no index could serve.

    PostgreSQL still chose a sequential scan with enable_seqscan disabled, which
    means no index covers the filtered columns.

      Seq Scan on "demo_customers"  Filter: ((city)::text = 'city3'::text)
          try:  CREATE INDEX ON demo_customers (city);
          from test_search.py:7
          SELECT demo_customers.id, ... FROM demo_customers WHERE demo_customers.…

That table holds eight rows, and that matters more than it looks.

The obvious way to write this check does not work. Failing on the presence of a Seq Scan is useless, because on a test database of twenty rows PostgreSQL picks a sequential scan even when a perfect index exists -- reading twenty rows is cheaper than descending a B-tree. So the plan alone cannot distinguish a missing index from a small table. And thresholding on table size, the usual next idea, means the check never fires on test data at all. Either way you get a check that lies to you.

So this asks a different question: not "did it scan?" but "could it have used an index?". The plan is taken with enable_seqscan disabled, which makes the planner treat sequential scans as enormously expensive. If it still picks one, no index can serve that filter -- and that answer does not depend on data volume. The test suite for this feature runs against eight rows on purpose, to keep that claim honest.

Excluding a table you read whole deliberately:

@pytest.mark.no_seq_scan(ignore=("countries", "settings"))

Three things this is careful about:

• The EXPLAIN runs on a raw DBAPI cursor, invisible to SQLAlchemy's events, so it is never counted among your test's queries and cannot recurse.
• It is wrapped in a savepoint, which both scopes the enable_seqscan change and absorbs a failed EXPLAIN that would otherwise abort your test's transaction.
• An unfiltered Seq Scan is never reported. Reading a whole table is sometimes exactly what you meant.

Needs pip install "pytest-querycount[postgresql]". On SQLite or MySQL the check raises rather than passing, because a check that cannot fail is not a check.

A fixture, for when a marker is too coarse

A marker covers the whole test. When you only care about one block:

def test_detail(db, querycount):
    with querycount(max_queries=2, no_seq_scan=True) as queries:
        serialise(db)

    assert queries.count == 2
    assert queries.duplicates() == []
    print(queries.report())

Call it with no arguments to observe without asserting -- that is how you find out what the budget should be before committing to one. The object from the with is the recorder, and it keeps its records after the block ends.

The report you leave switched on

pytest --querycount-report

============================== querycount summary ==============================
queries       time  dupes  test
-------  ---------  -----  -------------------------------------------
     13      0.1ms    12!  test_billing.py::test_billing_summary
      2      0.0ms     -   test_billing.py::test_billing_summary_fixed

15 queries in 0.1ms across 2 tests
! marks a repeated query shape -- add @pytest.mark.no_n_plus_one to see the detail.

A budget tells you when you crossed a line you drew. This tells you where the lines should go, and it is the honest way to adopt the plugin on an existing suite: run it once, look at the rows with a !, write budgets for those.

Options

--querycount-max is how you ratchet: set it just above your current worst test, then lower it as you fix things.

In pyproject.toml:

[tool.pytest.ini_options]
querycount_max = "20"
querycount_duplicate_threshold = "3"

Design decisions worth knowing

• Only the call phase is measured. Fixture setup and teardown run outside it, so creating a schema and seeding it never consume a budget.
• A failing test is never second-guessed. If your assertion fails, you see that failure, not a complaint about query counts on top of it.
• executemany counts as one query, because it is one round trip. That is the point of it, and the fix for a loop of inserts.
• No backend is an error, not a pass. If nothing is instrumented, every count is zero and every budget is trivially satisfied. The plugin raises instead, because a budget that cannot fail is worse than no budget.

Why not just count them yourself

You can, in about twenty lines of event.listen. What you will not have is the fingerprinting that tells WHERE id = 42 and WHERE id = 43 apart from each other but together against WHERE email = ?; the walk up the stack to find the line in your code rather than in SQLAlchemy's; the collapsing of IN (?,?,?) so that batch size does not change the shape; or the failure message that names the culprit before it shows the evidence. That is what this package is.

Prior art

nplusone did the detection half of this for Django and SQLAlchemy, but its last release was in May 2018 and it does not support SQLAlchemy 2.x. Django users have assertNumQueries built in, which covers budgets but not shapes. This plugin is aimed at the SQLAlchemy side -- FastAPI, Flask, Litestar -- where nothing is currently maintained.

Limitations

• SQLAlchemy 2.x only for now. Django and raw psycopg are on the roadmap.
• Under pytest-xdist the summary table is per worker, so it will be partial. Budgets and N+1 detection are unaffected.
• no_seq_scan is PostgreSQL only, and costs one EXPLAIN per SELECT while enabled. Budgets and N+1 detection work on any SQLAlchemy backend.
• The suggested CREATE INDEX is a starting point, not advice. Which columns to index, in what order, and whether the index earns its write cost need the whole query pattern, not one plan node. A filter over a function call (lower(email) = ...) yields no suggestion at all rather than a wrong one.

Contributing

python -m venv .venv && . .venv/bin/activate
pip install -e ".[dev]"

# The plan tests need PostgreSQL; without one they skip.
docker run -d --name qc-pg -e POSTGRES_PASSWORD=querycount \
    -e POSTGRES_DB=querycount -p 55432:5432 postgres:17-alpine

pytest && ruff check src tests && mypy

Set QUERYCOUNT_REQUIRE_PG=1 to turn those skips into failures, as CI does, and QUERYCOUNT_TEST_PG_URL to point elsewhere.

The suite runs pytest inside pytest via pytester: it writes a throwaway test, runs it in a subprocess, and asserts on the outcome. That is the only honest way to test a plugin whose job is to make tests fail.

Releasing

See RELEASING.md. Publication goes through PyPI Trusted Publishing, so there is no API token in this repository or its secrets.

Licence

MIT