python-broadlink

A Python module and CLI for controlling Broadlink devices locally.

About this fork. This repository is a maintained fork of mjg59/python-broadlink, which has not accepted changes since 2024. It exists so that Home Assistant's Broadlink integration has a library that can take fixes and new devices. The distribution on PyPI is python-broadlink; the import name stays broadlink. The first release corrects the IR timing constant reported in upstream #839 (fix in #841) and adds the devices waiting in upstream's pull request queue, including the RM Max and RM5 Plus. Version 1.0 is asynchronous and adds capture(); see CHANGELOG.md. Upstream's credit and MIT license are preserved.

Version 1.0 is asynchronous

Every call that reaches a device is a coroutine and must be awaited. That is the main change from the original library's API: method names and arguments are the same, and so are return values, with the small exceptions listed in CHANGELOG.md (the IR tick constant, pulses_to_data returning bytes, the unused Device.lock attribute removed, and timeout parameters typed as floats).

import asyncio
import broadlink


async def main():
    devices = await broadlink.discover(timeout=5)
    device = devices[0]
    await device.auth()
    print(await device.check_sensors())


asyncio.run(main())

Calling a device method without await returns a coroutine object and sends nothing; Python prints a RuntimeWarning: coroutine ... was never awaited when it is garbage collected. If you need the old synchronous behaviour, pin the original distribution (broadlink==0.19.0) instead.

The following devices are supported:

• Universal remotes: RM home, RM mini 3, RM plus, RM pro, RM pro+, RM4 mini, RM4 pro, RM4C mini, RM4S, RM4 TV mate, RM Max, RM5 plus
• Smart plugs: SP mini, SP mini 3, SP mini+, SP1, SP2, SP2-BR, SP2-CL, SP2-IN, SP2-UK, SP3, SP3-EU, SP3S-EU, SP3S-US, SP4L-AU, SP4L-EU, SP4L-UK, SP4M, SP4M-US, SP mini 3-AL, Ankuoo NEO, Ankuoo NEO PRO, Efergy Ego, BG AHC/U-01
• Switches: MCB1, SC1, SCB1E, SCB2
• Outlets: BG 800, BG 900
• Power strips: MP1-1K3S2U, MP1-1K4S, MP2
• Environment sensors: A1
• Alarm kits: S1C, S2KIT
• Light bulbs: LB1, LB26 R1, LB27 R1, SB800TD, LEDVANCE SMART+ WIFI CEILING TW 24W
• Curtain motors: Dooya DT360E-45/20
• Thermostats: Hysen HY02B05H
• Hubs: S3

Timing

The original library converted microseconds to the device's timing units with the constant 32.84, which is the right ratio applied the wrong way round, and it shortened every IR code built from microsecond timings by about 7 percent. Codes learned from a remote and replayed through the same device were never affected, which is why it went unnoticed for years. Version 1.0 uses 8192/269 (about 30.45 us per unit), the value implied by protocol.md, and rounds to the nearest unit instead of truncating.

Measured on an RM4 Pro against an independent receiver, the same NEC frame packed with the old constant arrived 5.4 percent short of its intended length; packed with the corrected constant it arrived 0.6 percent short, twice, thirteen hours apart, within 22 us of itself. Packets learned by the device and replayed by name are unchanged. Anything that stores microsecond timings produced by the old data_to_pulses (which reported them about 7.8 percent long) and re-encodes them with the new pulses_to_data will lengthen by that amount; store the device packet instead, as CapturedSignal.packet does.

Installation

Python 3.13 or newer. That is a support decision rather than a technical one: the code runs on 3.11, but the versions tested in CI are 3.13 and 3.14 and those are the ones Home Assistant ships.

Use pip3 to install the latest version of this module.

pip3 install python-broadlink

Both this distribution and the original broadlink install a package named broadlink, so only one can be present in an environment at a time. Pip does not warn about this: installing one on top of the other appears to succeed, and whichever was installed last is the one that import broadlink finds. If both were installed, uninstall both (pip3 uninstall broadlink python-broadlink) and reinstall this one, since pip3 uninstall broadlink alone removes the shared files and leaves python-broadlink registered but unimportable. This matters most where another package pins broadlink: installing it into the same environment silently replaces this async library with the original synchronous one.

Basic functions

The examples below are written as they would appear inside an async def function run with asyncio.run(...), as in the snippet above. To try them interactively, start Python with python3 -m asyncio, which gives you a prompt where await works at the top level.

import broadlink

Now let's try some functions...

Setup

In order to control the device, you need to connect it to your local network. If you have already configured the device with the Broadlink app, this step is not necessary.

1. Put the device into AP Mode.

• Long press the reset button until the blue LED is blinking quickly.
• Long press again until blue LED is blinking slowly.
• Manually connect to the WiFi SSID named BroadlinkProv.

2. Connect the device to your local network with the setup function.

await broadlink.setup("myssid", "mynetworkpass", 3)

Security mode options are (0 = none, 1 = WEP, 2 = WPA1, 3 = WPA2, 4 = WPA1/2)

Advanced options

You may need to specify a broadcast address if setup is not working.

await broadlink.setup("myssid", "mynetworkpass", 3, ip_address="192.168.0.255")

Discovery

Use this function to discover devices:

devices = await broadlink.discover()

Advanced options

You may need to specify local_ip_address or discover_ip_address if discovery does not return any devices.

Using the IP address of your local machine:

devices = await broadlink.discover(local_ip_address="192.168.0.100")

Using the broadcast address of your subnet:

devices = await broadlink.discover(discover_ip_address="192.168.0.255")

If the device is locked, it may not be discoverable with broadcast. In such cases, you can use the unicast version broadlink.hello() for direct discovery:

device = await broadlink.hello("192.168.0.16")

If you are a perfomance freak, use broadlink.xdiscover() to create devices instantly:

async for device in broadlink.xdiscover():
    print(device)  # Example action. Do whatever you want here.

Authentication

After discovering the device, call the auth() method to obtain the authentication key required for further communication:

await device.auth()

Closing

Each device keeps one UDP socket open for its lifetime (the original library opened a new one for every call). Close it when you are done with the device, either with the context manager or explicitly:

async with device:
    await device.auth()
    print(await device.check_sensors())

# or
await device.aclose()

The socket reopens by itself on the next call, so closing is cheap and safe to do at any time. A request that is in flight when aclose() runs fails with EndpointClosedError. An integration that creates devices should close them when it unloads; a device that is never closed holds its socket until it is garbage collected.

The next steps depend on the type of device you want to control.

Universal remotes

Learning IR codes

Learning IR codes takes place in three steps.

1. Enter learning mode:

await device.enter_learning()

2. When the LED blinks, point the remote at the Broadlink device and press the button you want to learn.
3. Get the IR packet.

packet = await device.check_data()

Learning RF codes

Learning RF codes takes place in six steps.

1. Sweep the frequency:

await device.sweep_frequency()

2. When the LED blinks, point the remote at the Broadlink device for the first time and long press the button you want to learn.
3. Check if the frequency was successfully identified:

ok, frequency = await device.check_frequency()
if ok:
    print(f"Frequency found: {frequency} MHz")

4. Enter learning mode:

await device.find_rf_packet()

5. When the LED blinks, point the remote at the Broadlink device for the second time and short press the button you want to learn.
6. Get the RF packet:

packet = await device.check_data()

Notes

Universal remotes with product id 0x2712 use the same method for learning IR and RF codes. They don't need to sweep frequency. Just call device.enter_learning() and device.check_data().

Canceling learning

You can exit the learning mode in the middle of the process by calling this method:

await device.cancel_sweep_frequency()

Capturing signals

capture() wraps the arm, poll, timeout and re-arm dance above into one async generator that yields each signal it hears as a CapturedSignal:

from contextlib import aclosing

async with aclosing(device.capture(window=30)) as signals:
    async for signal in signals:
        print(signal.kind, len(signal.pulses), "pulses")
        await other_device.send_data(signal.packet)

By default the window closes after the first signal. Pass stop_after_first=False to keep it open for the whole window (in seconds; window=0 runs until the generator is closed), re-arming after each signal because the device holds only one code per learning session. A universal remote has a single receiver, so only one capture window can be open on a device at a time: opening a second one raises CaptureInProgressError while the first is still held. Always close a window you leave early (aclosing above does it), otherwise it stays open until Python collects the generator.

CapturedSignal carries the device's own packet bytes (ready for send_data), the decoded pulses in microseconds at the corrected tick, the kind (SignalKind.IR, RF_433 or RF_315), the repeat count, and for RF the frequency_mhz the packet itself does not record.

RF works the same way on the Pro models, with the carrier as the one extra input:

async with aclosing(device.capture_rf(window=30, frequency=433.92)) as signals:
    async for signal in signals:
        ...

Pass frequency whenever you know it. Without it the device first sweeps for the carrier while you hold a button down, then learns the code from a fresh press; the sweep is unreliable on some firmware and can report a carrier it never really locked, so the known-frequency path is preferred.

Sending IR/RF packets

await device.send_data(packet)

Fetching sensor data

data = await device.check_sensors()

Switches

Setting power state

await device.set_power(True)
await device.set_power(False)

Checking power state

state = await device.check_power()

Checking energy consumption

state = await device.get_energy()

Power strips

Setting power state

await device.set_power(1, True)  # Example socket. It could be 2 or 3.
await device.set_power(1, False)

Checking power state

state = await device.check_power()

Light bulbs

Fetching data

state = await device.get_state()

Setting state attributes

await devices[0].set_state(pwr=0)
await devices[0].set_state(pwr=1)
await devices[0].set_state(brightness=75)
await devices[0].set_state(bulb_colormode=0)
await devices[0].set_state(blue=255)
await devices[0].set_state(red=0)
await devices[0].set_state(green=128)
await devices[0].set_state(bulb_colormode=1)

Environment sensors

Fetching sensor data

data = await device.check_sensors()

Hubs

Discovering subdevices

await device.get_subdevices()

Fetching data

Use the DID obtained from get_subdevices() for the input parameter to query specific sub-device.

await device.get_state(did="00000000000000000000a043b0d06963")

Setting state attributes

The parameters depend on the type of subdevice that is being controlled. In this example, we are controlling LC-1 switches:

Turn on

await device.set_state(did="00000000000000000000a043b0d0783a", pwr=1)
await device.set_state(did="00000000000000000000a043b0d0783a", pwr1=1)
await device.set_state(did="00000000000000000000a043b0d0783a", pwr2=1)

Turn off

await device.set_state(did="00000000000000000000a043b0d0783a", pwr=0)
await device.set_state(did="00000000000000000000a043b0d0783a", pwr1=0)
await device.set_state(did="00000000000000000000a043b0d0783a", pwr2=0)