Python Ember Mug

Python Library for interacting with Ember Mugs, Cups, and Travel Mugs via Bluetooth

• 📘 Documentation
• 💻 GitHub
• 🐍 PyPI

Summary

This is an unofficial library to attempt to interact with Ember Mugs via Bluetooth. This was created for use with my Home Assistant integration, but could be useful separately and has a simple CLI interface too.

All known Ember Mugs, Cups, Tumblers and Travel Mugs have been tested and seem to work well. If I missed one, or you have new feature ideas or issues, please create an issue, if it isn't already there, and we'll figure it out.

Features

• Finding devices
• Connecting to devices
• Reading/Writing most values
• Poll for changes

Attributes by device:

Note Writing may only work if the devices has been set up in the app previously

Usage

Python

from ember_mug.scanner import find_device, discover_devices
from ember_mug.utils import get_model_info_from_advertiser_data
from ember_mug.mug import EmberMug

# if first time with mug in pairing
devices = await discover_devices()

# after paired you can simply use
device, advertisement = await find_device()
model_info = get_model_info_from_advertiser_data(advertisement)
mug = EmberMug(device, model_info)
await mug.update_all()
print(mug.data.formatted)
await mug.disconnect()

# You can also use connection as a context manager
# if you want to ensure connection before starting and cleanup on exit
async with mug.connection():
    print('Connected.\nFetching Info')
    await mug.update_all()
    print(mug.data.formatted)

CLI Mode

It can also be run via command line either directly with ember-mug --help or as a module with python -m ember_mug --help There are four options with different subsections. You can see them by specifying them before help. eg ember-mug poll --help

ember-mug discover  # Finds the mug in pairing mode for the first time
ember-mug poll  # fetches info and keeps listening for notifications
ember-mug get name target-temp  # Prints name and target temp of mug
ember-mug set --name "My mug" --target-temp 56.8  # Sets the name and target temp to specified values

Basic options:

Example:

$ ember-mug poll
Found device: C9:0F:59:D6:33:F9: Ember Ceramic Mug
Connecting...
Connected.
Fetching Info
Device Data
+--------------+----------------------+
| Device Name  | Jesse's Mug          |
+--------------+----------------------+
| Meta         | None                 |
+--------------+----------------------+
| Battery      | 64.0%                |
|              | not on charging base |
+--------------+----------------------+
| Firmware     | None                 |
+--------------+----------------------+
| LED Colour   | #ff0fbb              |
+--------------+----------------------+
| Liquid State | Empty                |
+--------------+----------------------+
| Liquid Level | 0.00%                |
+--------------+----------------------+
| Current Temp | 24.50°C              |
+--------------+----------------------+
| Target Temp  | 55.00°C              |
+--------------+----------------------+

Watching for changes
Current Temp changed from "24.50°C" to "25.50°"
Battery changed from "64.0%, on charging base" to "65.5%, on charging base"

Caveats

• Since this api is not public, a lot of guesswork and reverse engineering is involved, so it's not perfect.
• If the device has not been set up in the app since it was reset, writing is not allowed. I don't know what they set in the app, but it changes something, and it doesn't work without it.
• Once that device has been set up in the app, you should ideally forget the device or at least turn off bluetooth whilst using it here, or you will probably get disconnected often
• I haven't figured out some attributes like udsk, dsk, location and timezone, but they are not very useful anyway.

Troubleshooting

Systematic timeouts or le-connection-abort-by-local

If your mug gets stuck in a state where it refuses to connect, you get constant reconnects, timeouts, and/or le-connection-abort-by-local messages in the debug logs, you may need to remove your mug via bluetoothctl remove my-mac-address and factory reset your device. It should reconnect correctly afterward. You may also need to re-add it to the app in order to make it writable again as well.

'Operation failed with ATT error: 0x0e' or another connection error

This seems to be caused by the bluetooth adaptor being in some sort of passive mode. I have not yet figured out how to wake it programmatically so sadly, you need to manually open bluetoothctl to do so. Please ensure the device is in pairing mode (ie the light is flashing blue or says "PAIR") and run the bluetoothctl command. You don't need to type anything. run it and wait until the mug connects.

Model incorrect or not found

I don't have a lot of these devices, so if this library does not correctly identify your device, please open and issue with the advertisement data of your device, so I can update the library to correctly identify it. Thanks!

Development

Install:

• hatch
• pre-commit

pip install hatch
# Use CLI interface
hatch run ember-mug --help
# Run Tests
hatch run test:cov
# View docs
hatch docs:serve
# Lint code
pre-commit run --all-files

Credits

This package was created with Cookiecutter and the waynerv/cookiecutter-pypackage project template.

Notice of Non-Affiliation and Disclaimer

This project is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Ember.

The name Ember as well as related names, marks, emblems and images are registered trademarks of their respective owners.