python-esp-bridge 0.10.0

Control every ESP32 peripheral from Python over USB serial or Bluetooth — GPIO, ADC, DAC, PWM, touch, I2C, SPI, UART, Wi-Fi sockets, BLE, ESP-NOW, RMT, 1-Wire, CAN, I2S, files, NVS, OTA

python-esp-bridge

Control every ESP32 peripheral from Python over USB serial — GPIO, PWM, ADC, DAC, touch, I2C, SPI, UART, Wi-Fi (with TCP/UDP sockets through the ESP32 radio) and BLE. Flash the bridge firmware once, then it's all Python.

from espbridge import Bridge

with Bridge() as esp:                      # Bluetooth first, then USB serial
    esp.gpio.mode(2, "output")
    esp.gpio.write(2, 1)
    print(esp.adc.read_mv(34), "mV")
    esp.i2c.init(sda=21, scl=22)
    print(esp.i2c.scan())
    esp.wifi.connect("ssid", "password")
    status, body = esp.net.http_get("http://example.com/")

• Firmware (flash once with Arduino IDE) and full docs: https://github.com/HamzaYslmn/python-esp-bridge
• Works on Raspberry Pi OS, Linux, Windows, macOS (Python ≥ 3.10, pyserial).
• espbridge CLI: connection info; espbridge ports: list candidate ports.