A small example package
Project description
# pyWS2812
Control WS2812 LED by UART Serial Port Protocol + non-gate transistor
The hardware requires a USB serial port module (for example, CH34X, FT232RL) and a non-gate (preferably a Schmitt trigger) that supports a baud rate of more than 2.5 MHz
After the serial port TX pin output is connected to the data port of the WS2812 LED through the inverter, the LED can be controlled by this module
通过UART串口协议+非门反相器来控制WS2812 LED🚨
硬件上需要一个支持2.5M波特率以上的USB转串口模块（例如<u>CH34x</u>, <u>FT232RL</u> 等）以及一个非门（最好是施密特触发器）
将串口TX引脚输出经过反相器后再连接到WS2812灯带的数据口后即可用本模块控制灯带了
Release history Release notifications | RSS feed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Source Distribution
Built Distribution
Filter files by name, interpreter, ABI, and platform.
If you're not sure about the file name format, learn more about wheel file names.
Copy a direct link to the current filters
File details
Details for the file pyws2812-0.1.2.tar.gz.
File metadata
- Download URL: pyws2812-0.1.2.tar.gz
- Upload date:
- Size: 5.2 kB
- Tags: Source
- Uploaded using Trusted Publishing? No
- Uploaded via: twine/4.0.0 CPython/3.7.13
File hashes
| Algorithm | Hash digest | |
|---|---|---|
| SHA256 |
e375f1e39bf256820f45a9fad2583c9aa330a9473ecb35c40013fcf5da89f357
|
|
| MD5 |
8f607cc2d73e5d4afae2af4ab1de0def
|
|
| BLAKE2b-256 |
f79b0d90c816be2b5aab88efb2d5bf77f12d623116e083940004fb090bc82898
|
File details
Details for the file pyws2812-0.1.2-py3-none-any.whl.
File metadata
- Download URL: pyws2812-0.1.2-py3-none-any.whl
- Upload date:
- Size: 5.6 kB
- Tags: Python 3
- Uploaded using Trusted Publishing? No
- Uploaded via: twine/4.0.0 CPython/3.7.13
File hashes
| Algorithm | Hash digest | |
|---|---|---|
| SHA256 |
fc4fcb1dd7ca88776227a16e8b4729aefcc449275ca355d9ea49e576ca762215
|
|
| MD5 |
3554c2b571808ce74bc0c9f1f5be06a0
|
|
| BLAKE2b-256 |
30266363999e6f7e06113711181eed1b037edbb6e0e96721b81de03c7063bf2b
|
