qso-graph-sim

Replays what a ham radio program sends on the network, from its own log, so you can build and test whatever receives it without a radio, an antenna or the program itself.

We start with WSJT-X. Give it an ALL.TXT, the log WSJT-X keeps of every decode, and it sends those decodes over UDP exactly as WSJT-X does: Heartbeat, Status and Decode messages, one cycle every 15 seconds. Anything that listens to WSJT-X, such as QSO Graph Desktop's Monitor, sees a live band.

It needs nothing but Python and qso-graph-lib, which pip installs with it: no audio and no radio.

Install

uv tool install qso-graph-sim

Or pipx install qso-graph-sim. Either puts the qso-graph-sim command on your PATH, on Windows, Linux and macOS alike. From 0.1.0, the first release; to run the newest code instead, see Development.

Quick start

Point it at the computer and port your receiver listens on. WSJT-X's own default port is 2237.

qso-graph-sim --wsjtx --to 192.168.1.50:2237

With no --file it plays a sample that comes with it: almost two busy minutes of 20 m FT8: 120 decodes in 7 cycles. To play your own log, give it WSJT-X's ALL.TXT:

qso-graph-sim --wsjtx --to 192.168.1.50:2237 --file ALL.TXT --from 260407_233000 --call KI7MT --grid DN13

It stops at the end of the log (or keeps going with --loop), or when you press Ctrl+C. Either way it sends Clear and Close, as WSJT-X does when it shuts down.

What it sends

Per cycle, in the order WSJT-X sends them:

It also answers Replay, the message a receiver sends to ask for the decodes WSJT-X already has: every decode played so far, marked not new, then a Status. It listens only to the address it was pointed at, and only to messages for its own Id.

The protocol is WSJT-X's own, as described in Network/NetworkMessage.hpp, schema 3, encoded by qso_graph_lib.jt, the same code jt-mcp decodes it with. A Tx line in the log is skipped: these are decodes, not your own transmissions.

Options

qso-graph-sim --wsjtx --to IP:PORT [--file PATH] [--from YYMMDD_HHMMSS]
              [--id NAME] [--call CALL] [--grid GRID] [--speed N] [--loop]

Testing with WSJT-X itself

To test with the real program and still no radio, run WSJT-X with Rig: None, then use Help → Download Samples and File → Open to play a recording. WSJT-X decodes it and sends the same messages it sends on the air, marked as off air.

Development

git clone https://github.com/qso-graph/qso-graph-sim.git
cd qso-graph-sim
uv sync --group dev
uv run pytest

Part of QSO-Graph

This package is part of qso-graph, tools for amateur radio. See qso-graph.io for documentation.

License

GPLv3