quelware-tools

Command-line tools and diagnostics for QuEL systems, built on quelware-client.

They run against an already-running manager + edge server (endpoint + PAT); they start nothing themselves.

Commands

• quel-tone-test — per-port tone test: put the unit's monitor into loopback, emit a tone on every tx/trx port, and check it appears in the monitor capture. A post-update health check. Exits non-zero if any port fails.
• quel-measure-delay — per-port path delay: put the monitor into loopback and, one tx/trx port at a time, emit a pulse while capturing from t=0 and time its arrival. With --verify, deskew all ports onto a common pulse comb, emit them together, and check each pulse lands where intended. Needs an admin PAT and an idle unit.
• quel-unit-config — show / set a unit's configuration controls. set needs an admin PAT and an idle unit.
• quel-echo-test — emit a pulse on a TRX port and capture the echoed response (optionally plotting the I/Q trace; install with the plot extra).

Install

pip install quelware-tools          # tools only
pip install "quelware-tools[plot]"  # + matplotlib for quel-echo-test plots