Skip to main content

Radware LBaaS v2 driver for Openstack Kilo

Project description

Radware driver for Openstack Kilo Neutron LBaaS v2

This Radware driver is the LBaaS v2 service provider driver for openstack KILO release.

Activate and configure Radware’s LBaaS v2 service provider:

  • Install the radware_os_lb_v2_kilo package by executing the following command (use sudo if needed):

    pip install radware_os_lb_v2_kilo
  • Open the neutron configuration file named neutron_lbaas.conf. Under [service_providers] section, next to already defined providers, add a new line, declaring the Radware LOADBALANCER v2 provider. The neutron service provider configuration line format consists of three identifiers delimited by a colon:

    • The service name, for LBaaS v2 service it’s LOADBALANCERV2.

    • The service provider name, in the example we will use “rdwr”

    • The service provider driver FQN. radware_os_lb_v2_kilo.v2_driver.RadwareLBaaSV2Driver is the driver class FQN

    service_provider = LOADBALANCERV2:rdwr:radware_os_lb_v2_kilo.v2_driver.RadwareLBaaSV2Driver

    You may add the “:default” at the end of the line for making this service provider a default service provider. For a reference:

    service_provider = LOADBALANCERV2:rdwr:radware_os_lb_v2_kilo.v2_driver.RadwareLBaaSV2Driver:default

    Note: There may be only one default service provider.

  • In neutron.conf file, add a new section where driver’s configuration parameters will be set.

    The name of the section should be radware_v2_driver, where “radware_” is a mandatory prefix and the “v2_driver” is the driver’s python module name. Add driver’s parameters under this section, for a reference:

    vdirect_address =

    See all possible parameters description in this README.rst file

  • Restart the neutron-server service

Using Radware’s LBaaS v2 provider:

For LB creation with Radware provider specify the radware provider in lbaas-loadbalancer-create CLI command. For example, if the name of the radware provider is rdwr, provider configuration line in neutron configuration file will be:

service_provider = LOADBALANCERV2:rdwr:radware_os_lb_v2_kilo.v2_driver.RadwareLBaaSV2Driver:default

CLI command will be:

neutron lbaas-loadbalancer-create --provider rdwr ...

Driver’s configuration parameters specification:

Following is a list of all driver configuration parameters. The only mandatory parameter is vdirect_address. Other parameters have default values

  • vdirect_address: The primary / standalone vDirect server IP address. This parameter is mandatory.

  • ha_secondary_address: The secondary vDirect server IP address when vDirect HA pair is used.

  • vdirect_user: The vDirect server user name, the default is root.

  • vdirect_password: The vDirect server user password, the default is radware.

  • port: The vDirect server port. The default is the default vDirect server HTTPS port 2189.

  • ssl: Use HTTPS for vDirect server connections, the default is True. If False is set, HTTP connections will be used.

  • ssl_verify_context: Verify SSL certificates on HTTPS connections. the default is True.

  • timeout: vDirect server HTTP[S] connection timeout, the default is 5000 milliseconds.

  • base_uri: vDirect server REST API base uri, the default is ‘’.

  • service_adc_type: ADC service type. Options are: VA or VX, the default is VA.

  • service_ha_pair: Enables or disables ADC service HA-pair, the default is False.

  • configure_allowed_address_pairs: configure specific allowed address pairs on VIP and PIP ports, in addition to a general CIDR allowed address pair configuration, the default is False.

  • service_throughput: Service throughput, the default is 1000.

  • service_ssl_throughput: Service SSL throughput, the default is 100.

  • service_compression_throughput: Service compression throughput, the default is 100.

  • service_cache: The size of ADC service cache, the default is 20.

  • service_resource_pool_ids: The list of vDirect server’s resource pools to use for ADC service provissioning, the default is empty.

  • service_isl_vlan: A required VLAN for the interswitch link to use, the default is -1.

  • service_session_mirroring_enabled: Enable or disable Alteon interswitch link for stateful session failover the default is False.

Creating another Radware service provider with different configuration:

Since no flavoring mechanism is currently available for service providers and driver FQN is unique, another Radware driver may be created and set as another LBAAS v2 service provider in neutron.

This driver package already contains an example python module called my_driver. Those are the steps to create and configure another Radware LBaaS v2 service provider with different configuration:

  • The radware_os_lb_v2_kilo package contains following modules:






  • Create a new python module which will contain your new driver class.

    For example, the name will be “my_driver”. The driver class should be implemented by following rules:

    • It should import the v2_driver module and inherit from v2_driver.RadwareLBaaSV2Driver class.

    • the __init__ function should get the plugin as parameter and call the base class __init__ function with the plugin and the module __name__ attribute.

    Example of module file:

    import v2_driver
    class MyRadwareLBaaSV2Driver(v2_driver.RadwareLBaaSV2Driver):
            def __init__(self, plugin):
                    v2_driver.RadwareLBaaSV2Driver.__init__(self, plugin, __name__)
  • Configure the new driver as another LBaaS v2 service provider in neutron configuration file

    The service provider configuration line for this driver will be:

    service_provider = LOADBALANCERV2:my_rdwr:radware_os_lb_v2_kilo.my_driver.MyRadwareLBaaSV2Driver

    The service provider configuration parameter for this driver will be, for example:

    vdirect_address =
    service_adc_type = VX
    service_ha_pair = true
    ssl_verify_context = false

    The LB creation CLI command for creating a new LB with this new provider will be:

    neutron lbaas-loadbalancer-create --provider my_rdwr ...

    After changing the service providers configuration in neutron configuration file, neutron server service restart is needed.

Project details

Download files

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Source Distribution

radware_os_lb_v2_kilo-4.2.1.post3.tar.gz (20.3 kB view hashes)

Uploaded source

Supported by

AWS AWS Cloud computing and Security Sponsor Datadog Datadog Monitoring Fastly Fastly CDN Google Google Download Analytics Microsoft Microsoft PSF Sponsor Pingdom Pingdom Monitoring Sentry Sentry Error logging StatusPage StatusPage Status page