ratingmodels 0.4.3

Rating and pricing models: manual and experience rate build-up, credibility blending, rate indications and decomposition, GLM relativities and evaluation, and pricing scenarios.

ratingmodels

Actuarial pricing and rate-indication tools for experience-rated insurance portfolios.

ratingmodels covers the group rating workflow — the step that turns experience analysis and loss modeling into an actual rate. It answers the central pricing question: what rate should we charge, and why did it change?

What it does

• Credibility — limited fluctuation (square-root rule), Bühlmann, and empirical Bühlmann-Straub with exposure weights.
• Trend — midpoint-to-midpoint factors; utilization / unit-cost split.
• Manual rating — base rate × relativities, loaded to a charged rate.
• Experience rating — pooling of large claims, trend, pooling charge, benefit/demographic adjustments, loading.
• Rate build-up — an ordered, auditable evaluator (multiply / add-dollar / segment-conditional) with labeled subtotals and a reconciling breakdown, plus par/non-par participation blending and medical+drug combining. Supplies the grammar of a manual build-up; the factor values stay yours.
• Base rate & off-balance — indicated base loss cost from book experience (base × relativities reproduces book losses); off-balance correction and base rebalancing when relativities are revised.
• Retention & gross-up — charged rate from the fundamental insurance equation (loss & LAE, flat fixed expense, percent-of-premium loads, profit), with the target loss ratio as an output, not an input.
• Blending & indication — credibility-weighted blend; build-up and loss-ratio indication methods.
• Rate-change decomposition — multiplicative and percentage-point contribution-to-change with an explicit residual.
• GLM relativities — Poisson / Gamma / Tweedie GLMs fit by IRLS, so factors are estimated jointly (correcting for correlation between rating variables) rather than one-way. No statsmodels dependency — the IRLS is in-package.
• Constraints & renewal — rate caps/floors, banding, rounding, corridors, and unit-level re-rating.
• Pricing scenarios & margin — evaluate a case at any rate action (issued, post-concession, plan) with the same expense algebra as the gross-up: premium, gross margin (benefit tier), margin after retention expense, margin ratio; the closed-form rate for any margin target (zero-margin and plan-target premiums, with the standard indication as the m = profit_margin special case); persistency-weighted expected dollars; tidy long scenario tables (scenario_frame) so cohort rollups and key-case exhibits are pivots of library output; and a closed-form uniform uplift (uplift_for_target_margin) answering "actions must be X% higher to hold the book's target margin."

Dependencies are numpy, pandas, and actuarialpy (which supplies the shared credibility primitives).

Installation

pip install ratingmodels

From source:

git clone https://github.com/OpenActuarial/ratingmodels
cd ratingmodels
pip install -e ".[dev]"
pytest

Quick start

import ratingmodels as rm

# --- experience side -------------------------------------------------------
capped, excess = rm.pool_claims(group_claims, pooling_point=250_000)
exp = rm.ExperienceRate(
    incurred_claims=4_200_000,
    exposure=96_000,            # member-months
    trend_annual=0.075,
    trend_years=1.5,            # experience midpoint -> rating midpoint
    pooled_excess=excess,
    pooling_charge=4.00,
    target_loss_ratio=0.85,
)

# --- manual side -----------------------------------------------------------
man = rm.ManualRate(
    base_loss_cost=480,
    factors={"area": 1.05, "industry": 0.97, "tier": 1.10},
    target_loss_ratio=0.85,
)

# --- credibility and indication -------------------------------------------
z = rm.limited_fluctuation_credibility(n=96_000, n_full=120_000)

ind = rm.RateIndication(
    experience_loss_cost=exp.loss_cost(),
    manual_loss_cost=man.loss_cost(),
    credibility=z,
    current_rate=560,
    target_loss_ratio=0.85,
    trend_total_factor=exp.trend_factor(),
    benefit_factor=1.00,
    demographic_factor=1.01,
)

print(f"indicated rate   : {ind.indicated_rate():.2f}")
print(f"indicated change : {ind.indicated_rate_change():+.2%}")

# why did the rate move?
print(ind.rate_change_decomposition().to_frame())

# apply a renewal cap
action = rm.renew(current_rate=560, indicated_rate=ind.indicated_rate(), cap=0.15)
print(f"proposed (capped): {action.proposed_rate:.2f} ({action.proposed_change:+.2%})")

Rate build-up with an audit trail

import ratingmodels as rm

med_par = rm.evaluate([
    rm.start("Par Base Claim Cost", 941.63),
    rm.add("$30 specialist copay", -11.44),
    rm.multiply("Rating Region", 1.083),
    rm.checkpoint("Medical Par Base Claim Cost"),
])
med_par.value          # final running total
med_par.breakdown      # DataFrame: step, operation, label, operand, running_total

# blend in-/out-of-network, then add the drug stream
med = rm.participation_blend(med_par.value, nonpar=1478.56, participation_rate=0.90)
total = rm.combine_streams({"Medical": med, "Drug": 323.67})
total.value            # feeds into trend / credibility / retention

The package supplies the build-up grammar; you supply the factor values (cost-sharing, age/sex, area, ...) from your filed tables. ManualRate is a thin shortcut over this engine, so ManualRate(...).breakdown() returns the same audit trail.

Base rate and retention

import ratingmodels as rm
import pandas as pd

# indicated base loss cost from book experience (off-balance method)
book = pd.DataFrame({
    "exposure": [24_000, 18_000, 30_000, 24_000],
    "area":     [1.00, 1.20, 0.90, 1.05],
    "tier":     [1.00, 1.10, 0.95, 1.25],
    "loss":     [11_750_000, 11_400_000, 12_300_000, 15_200_000],
})
base = rm.base_rate_from_experience(book, "exposure", "loss",
                                    factor_cols=["area", "tier"])
base.base_loss_cost        # average loss cost / average relativity

# gross claims up to a charged rate; the loss ratio falls out
retention = rm.RetentionLoad.from_items(
    fixed_expense=22.0,
    variable_items={"commission": 0.03, "premium_tax": 0.023, "aca_fees": 0.005},
    profit_margin=0.03,
)
retention.gross_rate(540.0)            # charged rate
retention.implied_loss_ratio(540.0)   # target loss ratio (an output)

# rebalance the base when relativities are revised (hold level, then +8%)
rm.rebalance_base_rate(current_base=base.base_loss_cost,
                       current_avg_relativity=1.0928, new_avg_relativity=1.12,
                       overall_change=0.08)

GLM relativities

import ratingmodels as rm
from ratingmodels.datasets import sample_rating_data

df = sample_rating_data(n=20_000)
model = rm.GLMRelativities(family="poisson").fit(
    df, response="claims", predictors=["area", "industry", "tier"],
    exposure="exposure",                 # enters as a log offset
    base_levels={"area": "A"},           # optional; defaults to modal level
)
print(model.base_value_)                 # fitted base frequency
print(model.relativities_["industry"])   # relativity per level, base = 1.0

Scope and honest limitations

This is a modeling and workflow toolkit, not filed rate software. It does not manage rate filings, store filed factor tables with effective dating, or enforce state-specific rating rules. The pooling-charge helper is a simple group-level estimate; a production charge is normally derived book-wide or from an EVT tail model. All bundled data in ratingmodels.datasets is synthetic and carries no assumptions.

License

MIT. See LICENSE.