Skip to main content

raydriver

Rust-native machine drivers for Rayforge, exposed to Python via PyO3.

Currently this provides a full port of Rayforge's advanced GRBL serial driver: character-counting flow control, handshake and status polling, interactive command queue, job streaming with stall detection and deadlock recovery, cancel/safety-shutdown semantics, settings and WCS access, and probe cycles. Dialects (command templates) remain data owned by Rayforge and are passed in resolved form.

CLI

The raydriver command runs G-code against a real device with live progress, or against the built-in firmware emulator for hardware-free dry runs:

raydriver run job.gcode --port /dev/ttyUSB0 --baudrate 115200
raydriver run job.gcode --emulator          # no hardware needed
raydriver status --port /dev/ttyUSB0 --seconds 5

While a job runs, raydriver run shows acknowledged lines, a progress bar, the device state, machine position, feed rate and ETA; Ctrl-C cancels the job and runs the safety shutdown.

Daemon (remote sessions)

The daemon runs the driver next to the hardware — e.g. on a Raspberry Pi in the workshop — while Rayforge runs on your desk. Jobs run daemon-side and survive client disconnects. Works on Linux, macOS and Windows; full reference in docs/daemon.md.

1. Add your machine

pip install raydriver          # includes network discovery
raydriver scan                 # find your machine's serial port
raydriver daemon add /dev/ttyUSB0

add creates the config file on first use and generates a token — the password clients use to connect. It prints the token; raydriver daemon status shows it again later. The config lives in ~/.config/raydriver/daemon.json (Linux), ~/Library/Application Support/raydriver/daemon.json (macOS) or %APPDATA%\raydriver\daemon.json (Windows).

The daemon announces itself over mDNS, so Rayforge's machine wizard discovers it automatically — no manual network setup.

Defaults are GRBL at 115200 baud; for other firmware use raydriver daemon add PORT --protocol smoothie --baudrate 115200 (protocols: grbl, grbl_simple, smoothie, marlin). raydriver daemon remove PORT unconfigures a device.

2. Run the daemon

raydriver daemon               # foreground
raydriver daemon install       # or as a service

install uses a systemd user unit on Linux, a launchd LaunchAgent on macOS and a logon scheduled task on Windows. raydriver daemon status shows the service state and probes the daemon; raydriver daemon uninstall stops and removes it.

3. Check it

raydriver list                 # configured devices + connection state
raydriver connection           # connected clients + control lease
raydriver info 127.0.0.1:8765  # sessions, devices and cameras

Connecting clients

Exposing the daemon to the LAN

On loopback the token never leaves the machine, so no TLS is needed. Reaching the daemon from another computer requires a certificate and a non-loopback bind — an exposed listener refuses to start without both a token and TLS. See docs/daemon.md for the setup.

Protocol analyzer

The analyzer captures device traffic, decodes it to a readable listing, and replays or proxies it — the workflow for developing protocols without hardware and for characterizing real controllers. Captures are editable JSONL (text lines or base64 for binary protocols), and decoders plug in per protocol (grbl ships first; raw and hex cover the rest).

# Record a session (or --emulator for a hardware-free dry run)
raydriver analyzer record --port /dev/ttyUSB0 --out cap.jsonl
raydriver analyzer tui --port /dev/ttyUSB0     # interactive monitor

# Print a capture as a decoded listing
raydriver analyzer decode cap.jsonl

# Replay captured frames at a device, at up to Nx speed
raydriver analyzer replay cap.jsonl --to 192.168.1.50:23 --speed 10

# Man-in-the-middle: point an application at the proxy in front of
# a TCP device and record both directions
raydriver analyzer proxy --upstream 192.168.1.50:23 --out mitm.jsonl

Golden tests pin wire behavior: deterministic scenarios run against the firmware emulators, and their decoded listings are diffed against fixtures under tests/golden/ (regenerate with RAYDRIVER_REGEN_GOLDEN=1). Captures from real hardware can be dropped in as fixtures the same way, so protocol changes that alter what goes over the wire fail loudly.

Security policy

Analyzer network endpoints are hardened before any socket opens:

  • listeners bind loopback (127.0.0.1) without authentication by default;
  • non-loopback or wildcard binds require both a token and TLS — there is no override;
  • explicitly configured authentication is never dropped.

Token checks and TLS handshakes are covered by tests that drive the real sockets and assert on the outcomes.

Releases

Releasing mirrors the Raygeo flow:

  1. Configure a PyPI trusted publisher for this repository once (owner barebaric, repo raydriver, workflow release.yml, environment pypi).
  2. gh release create v0.1.0 --title "v0.1.0" --generate-notes

The Build and Publish workflow then stamps the version from the tag, builds wheels (Linux/Windows/macOS) and an sdist, publishes to PyPI via OIDC, and attaches the artifacts to the GitHub release.

Development

make venv && source .venv/bin/activate
make dev     # build + install (do this before testing)
make test    # pytest suite (all tests are Python-based)
make check   # lint + test

Usage

import asyncio
from raydriver.grbl import GrblSession, SessionEvent

session = GrblSession(
    config={"port": "/dev/ttyUSB0", "baudrate": 115200},
    dialect={
        "home_all": "$H",
        "home_axis": "$H{axis_letter}",
        "clear_alarm": "$X",
        "laser_on": "M4 S{power:.0f}",
        "laser_off": "M5",
    },
    event_callback=on_event,
)

def on_event(event: SessionEvent):
    match event:
        case SessionEvent.StateChanged():
            print("device state:", event.state.status.name)
        case SessionEvent.ConnectionStatusChanged(status=status):
            print("connection:", status)
        case SessionEvent.RawRx(line=line):
            print("<<", line)
        case SessionEvent.RawTx(line=line):
            print(">>", line)

async def main():
    await session.connect()
    print(await session.execute_interactive_command("$I"))
    await session.disconnect()

asyncio.run(main())

xTool M2

M2Session connects to the M2's WS-V2 service for state monitoring, homing, motion and control of a job already staged on the machine. It does not upload or stream G-code jobs; use xTool Studio to stage those. M2 support uses a reverse-engineered local protocol and has not yet been validated against physical hardware.

The device commonly presents a self-signed TLS certificate. Certificate validation remains enabled by default. Set tls_allow_invalid_certs only on a trusted private network if the device certificate is not trusted by the host:

import asyncio
from raydriver.core import SessionEvent
from raydriver.xtool.m2 import M2Session

async def main():
    connected = asyncio.Event()

    def on_event(event):
        if (
            isinstance(event, SessionEvent.ConnectionStatusChanged)
            and event.status == "CONNECTED"
        ):
            connected.set()

    session = M2Session(
        config={
            "host": "192.168.1.50",
            "tls_allow_invalid_certs": True,
        },
        event_callback=on_event,
    )
    await session.connect()
    await asyncio.wait_for(connected.wait(), timeout=15)
    await session.disconnect()

asyncio.run(main())

The session also exposes home, move_to, jog, start, set_hold and cancel for supported machine-control operations. connect starts the connection loop; wait for the CONNECTED connection-status event before issuing machine commands.

Metadata

Release files for raydriver 1.7.0

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for raydriver 1.7.0
File Size Uploaded Provenance Actions
raydriver-1.7.0.tar.gz 306.6 kB With provenance Details for raydriver-1.7.0.tar.gz

Built distributions (wheels)

Table of built distributions (wheels) for raydriver 1.7.0
File Actions
raydriver-1.7.0-cp311-abi3-win_amd64.whl CPython 3.11 abi3 Windows x86-64 Details for raydriver-1.7.0-cp311-abi3-win_amd64.whl
raydriver-1.7.0-cp311-abi3-manylinux_2_34_x86_64.whl CPython 3.11 abi3 Linux glibc 2.34+ x86-64 Details for raydriver-1.7.0-cp311-abi3-manylinux_2_34_x86_64.whl
raydriver-1.7.0-cp311-abi3-manylinux_2_34_aarch64.whl CPython 3.11 abi3 Linux glibc 2.34+ ARM64 Details for raydriver-1.7.0-cp311-abi3-manylinux_2_34_aarch64.whl
raydriver-1.7.0-cp311-abi3-macosx_11_0_arm64.whl CPython 3.11 abi3 macOS 11.0+ ARM64 Details for raydriver-1.7.0-cp311-abi3-macosx_11_0_arm64.whl
raydriver-1.7.0-cp311-abi3-macosx_10_12_x86_64.whl CPython 3.11 abi3 macOS 10.12+ x86-64 Details for raydriver-1.7.0-cp311-abi3-macosx_10_12_x86_64.whl

Total release size: 21.6 MB

Release files / raydriver-1.7.0.tar.gz

Download URL raydriver-1.7.0.tar.gz
Size 306.6 kB
Tags Source
SHA-256 checksum
How to use checksums
d3a4b56edc79acad626eae2c30799c1c52ccf726b7ecc0194c13b3ee182ca31c
BLAKE2b-256 checksum
How to use checksums
5b4564ba0085fe44440ff495b5cea45eeada5b9998bdad18d5f99f906c56f2bf
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

Release files / raydriver-1.7.0-cp311-abi3-win_amd64.whl

Download URL raydriver-1.7.0-cp311-abi3-win_amd64.whl
Size 4.1 MB
Tags CPython 3.11 Windows x86-64 abi3
SHA-256 checksum
How to use checksums
223548bbbb98d2a943d4c19fcc7110bae68aa881139477dd6edcda021a2896fa
BLAKE2b-256 checksum
How to use checksums
92e0b6f6f39e2fc54a0a2739ce208741b853fede5493a5c652fe466e79ce4891
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

Release files / raydriver-1.7.0-cp311-abi3-manylinux_2_34_x86_64.whl

Download URL raydriver-1.7.0-cp311-abi3-manylinux_2_34_x86_64.whl
Size 4.4 MB
Tags CPython 3.11 Linux glibc 2.34+ x86-64 abi3
SHA-256 checksum
How to use checksums
bed55ae15b87a8d6df607c26e6e7c1e4c7a6430df368e07e1f1e831272b556a9
BLAKE2b-256 checksum
How to use checksums
45ef98539e8072d7ac131ea6c077cee97927b6205422777f8fa3ff585349516e
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

Release files / raydriver-1.7.0-cp311-abi3-manylinux_2_34_aarch64.whl

Download URL raydriver-1.7.0-cp311-abi3-manylinux_2_34_aarch64.whl
Size 4.5 MB
Tags CPython 3.11 Linux glibc 2.34+ ARM64 abi3
SHA-256 checksum
How to use checksums
d6c85ed3c0a3d3108df19f879d3d05062d448cb17f019c33efdc86933b1ee16c
BLAKE2b-256 checksum
How to use checksums
c59dcb4558e2b9979a48265407d09d7b1d2a8488203d2c3babeec9e56aa406dd
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

Release files / raydriver-1.7.0-cp311-abi3-macosx_11_0_arm64.whl

Download URL raydriver-1.7.0-cp311-abi3-macosx_11_0_arm64.whl
Size 4.0 MB
Tags CPython 3.11 abi3 macOS 11.0+ ARM64
SHA-256 checksum
How to use checksums
cd549f4d2bf86df96e49ab1bae6a4d27e84563fc7f99bb286f6b509d8a9a3831
BLAKE2b-256 checksum
How to use checksums
c2400541aad89c3827151e935da90c5f4151472c8f5b695328b0b2c149378a4e
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

Release files / raydriver-1.7.0-cp311-abi3-macosx_10_12_x86_64.whl

Download URL raydriver-1.7.0-cp311-abi3-macosx_10_12_x86_64.whl
Size 4.2 MB
Tags CPython 3.11 abi3 macOS 10.12+ x86-64
SHA-256 checksum
How to use checksums
632b339ab179418c98b3ee58663aa4641f29ef4b34d94bb7cce146746d5eebc2
BLAKE2b-256 checksum
How to use checksums
f64937ba022e6e60b619dc6d760ee9556da1bdd31f9b477e7e8c01ba9fff1ae0
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

Security for raydriver 1.7.0

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

Full provenance

All 6 files in this release have been uploaded with provenance metadata.

Select from 6 files

Attestation for raydriver-1.7.0.tar.gz

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 17, 2026.

Transparency log

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

To learn more about protecting yourself from malicious actors, visit our package security documentation.

Release history Release notifications | RSS feed

This release

1.7.0 This release

6 release files Full provenance

Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page