reactor-webrtc (Python)

Python bindings for the reactor-webrtc WebRTC engine, built with PyO3 and distributed as a self-contained wheel — no separate native library required at runtime.

Installation

pip install reactor-webrtc

Requires Python ≥ 3.10.

Quick start

PeerConnection's signaling methods are natively awaitable, so this runs inside an asyncio event loop:

import asyncio
import reactor_webrtc as rw

async def main():
    factory = rw.PeerConnectionFactory()

    obs = rw.PeerConnectionObserver()
    obs.on_ice_candidate = lambda c: relay_to_peer(c)
    obs.on_connection_state_change = lambda s: print("state:", s)

    config = rw.RtcConfiguration(ice_servers=[
        rw.IceServer(urls=["stun:stun.l.google.com:19302"]),
        # A turn:/turns: entry needs both credentials, or libwebrtc rejects the
        # whole configuration.
        rw.IceServer(urls=["turn:turn.example.com:3478"], username="alice", password="secret"),
    ])
    pc = factory.create_peer_connection(config, obs)

    offer = await pc.create_offer()
    await pc.set_local_description(offer)

    # Exchange offer.sdp with the remote peer via your signaling channel, then:
    # await pc.set_remote_description(remote_answer)
    # await pc.add_ice_candidate(candidate)

asyncio.run(main())

Audio

# Headless / server: push PCM programmatically (synthetic ADM, default)
factory = rw.PeerConnectionFactory()
factory.push_audio_frame(pcm_bytes, sample_rate=48000, channels=1)

# Desktop client: real mic + AEC3 + noise suppression
factory = rw.PeerConnectionFactory(
    platform_adm=True,
    echo_canceller=True,
    noise_suppression=True,
)

# Per-peer track, fed directly: pass a capture time so the receiver can line
# this audio up with the video produced alongside it.
audio = factory.create_audio_track_with_local_source("mic")
now = rw.time_micros()
video.push_video_frame(bgra, 320, 240, capture_time_us=now)
audio.push_pcm(pcm_bytes, 48000, 1, capture_time_us=now)

An audio track's RTP timestamp counts the samples it has been handed, so it says how much audio exists but not when it happened — hence capture_time_us, and hence the rule that a producer owes the track a frame (silence, if it has nothing) on every tick. See docs/av-sync.md.

Factory builder + per-track options

Every process-physical choice composes on one builder; every per-track choice arrives as kwargs on the track creation:

builder = rw.PeerConnectionFactoryBuilder()
builder.with_platform_adm()          # real mic + AEC3/NS/AGC/high_pass
builder.with_metadata(False)         # factory-wide frame-metadata kill switch
builder.with_dtls_in_stun(True)      # SPED: DTLS handshake inside the ICE checks
builder.with_receive_playout_delay() # decode each frame as soon as it's complete
factory = builder.build()

# Raw video with an H.264 backend chosen per track:
camera = factory.create_video_track_with_options(
    "cam", h264_backend=rw.H264Backend.VideoToolbox)

# Pre-encoded video (previously with_encoded_video_track's factory):
screen = factory.create_video_track_with_options(
    "screen", pre_encoded=(1920, 1080))

# Encoder feedback: keyframe requests and BWE rate updates:
screen.on_encoder_feedback(
    lambda fb: push_an_idr_soon() if isinstance(fb, rw.KeyFrameRequest)
    else adapt(bitrate=fb.bitrate_bps))

# Music next to the mic — a per-track push pipe:
music = factory.create_audio_track_with_options(
    "music", source=rw.AudioTrackSource.LocalPush,
    echo_cancellation=False, noise_suppression=False)

Pre-encoded video

factory, video = rw.PeerConnectionFactory.with_encoded_video_track(
    "camera", width=1280, height=720
)
pc = factory.create_peer_connection(config, obs)
tx = video.add_transceiver(pc, rw.TransceiverDirection.SendOnly)

# From your encoder thread:
video.push_encoded_frame(
    data=h264_annex_b,
    is_key_frame=True,
    width=1280, height=720,
)

Codec preferences

tx = pc.add_transceiver(rw.MediaKind.Video, rw.TransceiverDirection.SendOnly)
await tx.set_track(video_track)
await tx.set_codec_preferences([rw.VideoCodec.Vp9, rw.VideoCodec.Vp8])

answer = await pc.create_answer()
await pc.set_local_description(answer)

set_local_description/set_remote_description also make this transceiver's own sender actually encode with whichever preferred codec was negotiated, once negotiation completes — not just list it first in the SDP. No further call needed.

Receiving media

obs = rw.PeerConnectionObserver()

def on_track(kind, track):
    if kind == rw.MediaKind.Video:
        track.on_video_frame(lambda bgra, w, h: display(bgra, w, h))
    elif kind == rw.MediaKind.Audio:
        track.on_audio_frame(lambda pcm, sr, ch, n: play(pcm))

obs.on_track = on_track

Stats

report = await pc.get_stats()
for pair in report.candidate_pairs:
    print(pair.state, f"{pair.current_round_trip_time_s * 1000:.1f}ms")

API reference

RtcConfiguration also takes a min_port/max_port pair (UDP port range), ice_connection_receiving_timeout_ms, ice_check_interval_strong_connectivity_ms, and sctp_snap (SNAP: SCTP parameters in the SDP, so a data channel opens two round trips sooner — the peer must opt in too); PeerConnectionFactoryBuilder.with_dtls_in_stun is its factory-wide DTLS counterpart (SPED), and PeerConnection.set_bitrate sets congestion-control bitrate limits after the connection is created. All covered in docs/configuration.md.

Per-frame metadata

Arbitrary bytes can ride alongside each encoded video frame, in a protobuf trailer appended to the payload:

video.push_video_frame(bgra, 320, 240, user_data=b"anything you like")

def on_frame(bgra, w, h, meta):
    if meta is not None:
        print(meta.frame_id, meta.timestamp, meta.user_data)

track.on_video_frame(on_frame)

That only works if the far end strips the trailer before its decoder sees it, so support is negotiated in the SDP and you do not have to do anything for it:

• create_offer advertises the capability as one session-level a=x-reactor-frame-metadata:1 (rw.FRAME_METADATA_ATTRIBUTE, rw.FRAME_METADATA_VERSION).
• create_answer mirrors an offer that asked for it.
• set_remote_description arms pc.frame_metadata_gate() and, when it is open, installs the embed and strip transforms on the video transceivers. The sender transform still checks the gate per frame, so a renegotiation that drops support stops the trailers.

A peer that has never heard of the attribute ignores it, the gate stays closed, and user_data is silently dropped rather than corrupting that peer's decode. Read pc.frame_metadata_gate().is_open() if you want to know whether the peer agreed.

Read the declaration from the signalled SDP string, not from pc.remoteDescription or its equivalents: libwebrtc and browsers both discard a= lines they do not recognise while parsing.

A FrameTransform of your own composes with the metadata step rather than displacing it — the library owns libwebrtc's single transformer slot per sender/receiver and runs both. Your callback goes first in both directions, so it sees exactly the bytes that traverse the network.

To keep frame metadata out of a connection entirely:

config = rw.RtcConfiguration(frame_metadata=False)

No a=extmap, no mirroring, no transforms, and user_data is dropped — the connection is indistinguishable from one built before the capability existed.

Choosing your own ICE credentials

libwebrtc generates the ICE ufrag and password itself and offers no setter. If something upstream needs to recognise a session by its ufrag — an edge relay that demultiplexes on it, say — substitute the credentials in the description before setting it locally:

answer = await pc.create_answer()
answer = answer.with_ice_credentials(my_ufrag, my_password)
await pc.set_local_description(answer)

answer.ice_ufrags()  # ["<my_ufrag>", ...] — one per m-section

The local description is what libwebrtc reads the transport's ICE parameters from, so the substituted values are the ones that end up on the wire.

Two things to get right:

• Order. Setting the local description is what creates the transport and starts gathering, so substituting afterwards acts on nothing.
• Renegotiation. Changing the credentials between generations is an ICE restart (RFC 8445 §9). On a renegotiation that is not meant to restart ICE, pass the values the session already uses.

Raises if a value is outside RFC 8445's ranges (ufrag 4–256 characters, password 22–256) or contains anything outside ice-char — which is also what stops a newline in a credential from injecting an SDP line.

Thread safety

PeerConnection's signaling methods (create_offer, create_answer, set_local_description, set_remote_description, add_ice_candidate, get_stats, transceivers) plus set_bitrate are natively awaitable — await them directly, no asyncio.to_thread()/executor wrapping needed. They still take a few milliseconds to resolve while the WebRTC engine responds, but that wait happens off the event loop thread, so it never blocks other coroutines. On Transceiver, set_direction, set_track, and set_codec_preferences are the same way.

Every other method (add_track, add_transceiver, create_data_channel, Transceiver.set_sender_transform/set_receiver_transform, and everything on Track/DataChannel) is a fast synchronous call with no native round-trip, and stays a plain function call — no await.

Callbacks fire on WebRTC internal threads with the GIL acquired; keep them fast.

License

Apache-2.0. Upstream WebRTC is BSD-3-Clause + the WebRTC patent grant.