remnic-hermes 1.0.2

Remnic MemoryProvider plugin for Hermes Agent

remnic-hermes

Remnic MemoryProvider plugin for Hermes Agent. Automatically injects memories into every LLM call and observes every conversation turn — no agent code changes required.

Why MemoryProvider

MCP tools give an agent the ability to call memory functions, but only when the agent decides to. With the MemoryProvider protocol, recall happens structurally on every turn before the LLM is called, and observation happens after every response. The agent cannot forget to recall because the hook is not optional. A plain MCP integration requires the LLM to recognize that it should search for memories and then choose to call the tool; the MemoryProvider removes that dependency entirely.

Aspect	MCP Only	MemoryProvider
Recall	Agent must call remnic_recall	Automatic on every turn
Observe	Agent must call remnic_store	Automatic after every response
Latency	Tool call overhead	Pre-fetched, non-blocking
Reliability	Agent may forget to call	Structural — cannot be skipped

Which Hermes plugin slot does Remnic use?

Remnic ships as a Hermes memory provider plugin (declared in plugin.yaml as kind: exclusive, the Hermes manifest kind used for provider plugins selected through memory.provider).

Remnic does not use, and does not need to use, Hermes' context_engine slot. That slot replaces the built-in ContextCompressor — it is for compressing the agent's own outgoing conversation history. Remnic delivers external memory recall (and, when enabled daemon-side, Lossless Context Management archive content) through the memory_provider hook (pre_llm_call), which is the correct slot for this concern.

If you have read documentation or third-party reviews suggesting Remnic must register as a context_engine to enable LCM in Hermes, that is incorrect. LCM runs on the Remnic daemon and arrives in Hermes through the recall envelope returned by the memory_provider — no context_engine registration is involved. The two slots are orthogonal: a future Remnic-backed ContextEngine plugin would be a separate, additive feature for replacing Hermes' local compressor, not a prerequisite for memory or LCM.

Prerequisites

• Remnic daemon running and accessible on port 4318 (default). See the Remnic repository for installation instructions.
• Hermes Agent v0.7.0 or later — the MemoryProvider protocol was added in v0.7.0.
• Python 3.10 or later.

Quick start

1. Install the plugin:

   pip install remnic-hermes
   

2. Wire Hermes to Remnic (generates an auth token, writes the Hermes config entry, and checks daemon health):

   remnic connectors install hermes
   

3. Restart Hermes so it picks up the new config entry.

4. Verify the connection:

   hermes --version && pip show remnic-hermes
   

Your agent should now have access to remnic_recall, remnic_store, remnic_search, remnic_lcm_search, and remnic_profiling_report tools. Call remnic_recall with any query to confirm memories are returned.

Manual configuration

If you prefer not to use remnic connectors install, add the following to your Hermes config.yaml directly:

plugins:
  - remnic_hermes

remnic:
  host: "127.0.0.1"      # Remnic daemon host. Default: 127.0.0.1
  port: 4318             # Remnic daemon port. Default: 4318
  token: ""              # Auth token. Leave empty to auto-load from ~/.remnic/tokens.json.
  session_key: ""        # Session identifier. Auto-generated as hermes-<12hex> if not set.
  timeout: 30.0          # HTTP request timeout in seconds. Default: 30.0

A legacy engram: config block is also accepted during the Engram to Remnic transition. The plugin reads remnic: first and falls back to engram: when the remnic: key is absent, so existing configs continue working without edits.

Environment variable overrides

Variable	Overrides	Description
REMNIC_HOST	remnic.host	Daemon hostname or IP
REMNIC_PORT	remnic.port	Daemon port number
ENGRAM_HOST	remnic.host	Legacy fallback for REMNIC_HOST
ENGRAM_PORT	remnic.port	Legacy fallback for REMNIC_PORT

Environment variables are only consulted when the corresponding field is absent from the config block. Inline config values take precedence over environment variables.

The auth token is not read from an environment variable. It is either set inline (token: "...") or auto-loaded from the Remnic token store at ~/.remnic/tokens.json (falling back to ~/.engram/tokens.json during the compat window).

Token bootstrap

remnic connectors install hermes is the recommended way to get a token into place. It:

1. Validates the Hermes profile directory and config structure.
2. Generates a dedicated per-connector auth token scoped to Hermes.
3. Adds the remnic: block to your Hermes config.yaml (with rollback on failure).
4. Commits the token to ~/.remnic/tokens.json.
5. Writes the connector config file.
6. Runs a health check against the daemon (does not start it — prints remnic daemon start if unreachable).

If you provision tokens manually, write a JSON file at ~/.remnic/tokens.json in the format:

{
  "tokens": [
    { "connector": "hermes", "token": "remnic_hm_...", "createdAt": "2026-01-01T00:00:00Z" }
  ]
}

The plugin searches for a connector: "hermes" entry first, then falls back to connector: "openclaw".

What it does

Method	Trigger	Behavior
initialize	Plugin loads	Opens an HTTP client to the Remnic daemon and pings /health. A failed health check is non-fatal — the daemon may start later.
pre_llm_call	Before every LLM call	Recalls up to 8 memories using the last user message as the query. Skipped if the user message is fewer than 3 words. Injects a <remnic-memory> block into the system prompt when results are found.
sync_turn	After every response	Sends the last 2 messages (user + assistant) to the Remnic daemon for real-time observation.
extract_memories	Session ends	Sends the full session transcript to the daemon for deep structured extraction.
shutdown	Plugin unloads	Closes the HTTP client.

Tools it registers

Tool name	Description
remnic_recall	Recall memories matching a natural language query
remnic_store	Store a memory explicitly
remnic_search	Full-text search across all stored memories
remnic_lcm_search	Search the daemon-side LCM conversation archive
remnic_recall_explain	Inspect the last recall snapshot
remnic_recall_tier_explain	Inspect tier attribution for the last direct-answer recall
remnic_recall_xray	Run recall with X-ray attribution capture
remnic_memory_last_recall	Fetch the memory IDs injected in the last recall
remnic_memory_intent_debug	Inspect the latest intent/planner snapshot
remnic_memory_qmd_debug	Inspect the latest QMD recall snapshot
remnic_memory_graph_explain	Inspect graph recall expansion from the last recall
remnic_memory_feedback_last_recall	Record relevance feedback for a recalled memory
remnic_set_coding_context	Attach coding project context to a session
remnic_memory_get	Fetch one stored memory by id
remnic_memory_store	Store a memory with the daemon's richer memory-store schema
remnic_memory_timeline	Fetch the timeline for one stored memory
remnic_memory_profile	Read the user profile surface
remnic_memory_entities	List tracked entities
remnic_memory_questions	List open memory questions
remnic_memory_identity	Read identity memory state
remnic_memory_promote	Promote a memory candidate or stored memory
remnic_memory_outcome	Record or inspect a memory outcome
remnic_entity_get	Fetch one tracked entity by name
remnic_memory_capture	Capture an explicit memory note
remnic_memory_action_apply	Apply a memory action
remnic_continuity_audit_generate	Generate a continuity audit report
remnic_continuity_incident_open	Open a continuity incident
remnic_continuity_incident_close	Close a continuity incident with verification
remnic_continuity_incident_list	List continuity incidents by state
remnic_continuity_loop_add_or_update	Add or update a continuity improvement loop
remnic_continuity_loop_review	Review an existing continuity improvement loop
remnic_identity_anchor_get	Read the identity continuity anchor
remnic_identity_anchor_update	Conservatively merge identity anchor sections
remnic_review_queue_list	Fetch the latest review queue artifact bundle
remnic_review_list	List contradiction review items
remnic_review_resolve	Resolve a contradiction review pair
remnic_suggestion_submit	Queue a suggested memory for review
remnic_work_task	Manage work-layer tasks
remnic_work_project	Manage work-layer projects
remnic_work_board	Export or import work-layer board snapshots and markdown
remnic_shared_context_write_output	Write agent work product into shared context
remnic_shared_feedback_record	Record shared feedback for peer modeling
remnic_shared_priorities_append	Append priorities notes for curator merge
remnic_shared_context_cross_signals_run	Generate shared-context cross-signal artifacts
remnic_shared_context_curate_daily	Generate the daily shared-context roundtable
remnic_compounding_weekly_synthesize	Generate weekly compounding outputs
remnic_compounding_promote_candidate	Promote a compounding candidate into durable memory
remnic_compression_guidelines_optimize	Run compression-guideline policy optimization
remnic_compression_guidelines_activate	Activate a staged compression-guideline draft
remnic_memory_governance_run	Run memory governance in shadow or apply mode
remnic_procedure_mining_run	Run procedural memory mining
remnic_procedural_stats	Read procedural memory stats
remnic_contradiction_scan_run	Run an on-demand contradiction scan
remnic_memory_summarize_hourly	Generate hourly conversation summaries
remnic_conversation_index_update	Update the conversation index
remnic_day_summary	Generate a structured end-of-day summary
remnic_briefing	Generate a daily context briefing
remnic_context_checkpoint	Save a structured context checkpoint for a session

During the Engram to Remnic compat window, legacy engram_* aliases are also registered for each tool. These route to the same handlers. Their schema descriptions intentionally say "Engram" (not "Remnic") so that tool names and descriptions agree when a language model surfaces the legacy names. The engram_* aliases will be removed in a future major release. New integrations should use the remnic_* names.

The existing simple remnic_store / engram_store compatibility tools remain available. Use remnic_memory_store / engram_memory_store when the caller needs the richer daemon schema.

Profiles and namespaces

Hermes isolates agent state per profile under ~/.hermes/profiles/<name>/. Each profile loads its own config.yaml, so you can run separate remnic: blocks with different session_key values to keep memory contexts distinct. See docs/plugins/hermes.md for a worked example.

Verify it is working

hermes --version && pip show remnic-hermes

Then start a session and call remnic_recall with a short phrase. If the daemon is healthy you will get a JSON response; if memories exist for that query they will appear in the context field. You can also check <remnic-memory> blocks in the Hermes debug log to confirm automatic recall is firing on each turn.

Troubleshooting

Daemon not running

remnic daemon status
remnic daemon install    # installs and starts the launchd/systemd service

Token missing — calls return 401

Check that ~/.remnic/tokens.json exists and contains a hermes connector entry. Re-running remnic connectors install hermes regenerates the token and re-writes the file.

cat ~/.remnic/tokens.json

Import error — ModuleNotFoundError: No module named 'remnic_hermes'

The package must be installed in the same Python environment Hermes uses:

which python && pip show remnic-hermes
hermes --version

If they differ, install into the correct environment: <path-to-hermes-python> -m pip install remnic-hermes.

Memories not appearing in context

Memories are only injected when the last user message is 3 or more words and the daemon is reachable. Check daemon health first, then verify the query length. You can force a manual recall via the tool to confirm the round-trip works:

remnic daemon status

Uninstall

pip uninstall remnic-hermes
remnic connectors remove hermes

remnic connectors remove hermes revokes the token and removes the config entry from Hermes config.yaml.

LCM in Hermes

remnic_lcm_search searches the Remnic daemon's Lossless Context Management archive on demand. The legacy engram_lcm_search alias is registered for existing Engram-era Hermes configurations.

LCM runs daemon-side and reaches Hermes through the memory_provider recall path. Remnic does not register, and does not need, a Hermes context_engine slot for this feature.

Further reading

• Full reference: docs/plugins/hermes.md — complete config schema, recall/observe/extract internals, profile isolation examples, and migration notes from the Engram era.
• Remnic repository — daemon installation and overall architecture.
• Hermes Agent — the agent framework this plugin extends.

License

MIT