remoterf-host 0.1.6

RemoteRF host-side control package

RemoteRF Host (hostrf) — Linux Setup

HostRF Installation

The guide is done/verified for Ubuntu Server/Desktop 24.04 LTS.

0) If Raspberry Pi

Raspberry Pi Imager → Install Ubuntu Server 24.04 LTS → Boot Raspberry Pi from SD card.

1) System Prerequisites (APT)

sudo apt update
sudo apt install -y curl ca-certificates bzip2 git build-essential
sudo apt install -y libusb-1.0-0 udev

Optional: confirm architecture:

uname -m

• x86_64 → Intel/AMD
• aarch64 → ARM64 (Raspberry Pi 64-bit, some servers)

---

2) Install Miniconda

2.1 Download the installer

x86_64

cd /tmp
curl -fsSLO https://repo.anaconda.com/miniconda/Miniconda3-latest-Linux-x86_64.sh

ARM64 (aarch64)

cd /tmp
curl -fsSLO https://repo.anaconda.com/miniconda/Miniconda3-latest-Linux-aarch64.sh

2.2 Install (non-interactive, recommended)

x86_64

bash Miniconda3-latest-Linux-x86_64.sh -b -p "$HOME/miniconda3"

ARM64 (aarch64)

bash Miniconda3-latest-Linux-aarch64.sh -b -p "$HOME/miniconda3"

2.3 Enable conda in your current shell

source "$HOME/miniconda3/etc/profile.d/conda.sh"
conda --version

If you want conda available automatically in new terminals:

"$HOME/miniconda3/bin/conda" init bash
source ~/.bashrc

2.4 Install mamba (default solver)

conda install -n base -c conda-forge -y mamba
mamba --version

Might have to accept anaconda TOS.

conda tos accept --override-channels --channel https://repo.anaconda.com/pkgs/main

conda tos accept --override-channels --channel https://repo.anaconda.com/pkgs/r

3) Create the Environment (with mamba (faster))

mamba create -n hostrf -y -c conda-forge -c defaults  python=3.10 pip setuptools wheel grpcio protobuf python-dotenv numpy scipy libiio pylibiio libusb

conda activate hostrf
python -m pip install -U pip
python -m pip install pyadi-iio remoterf-host

HostRF Config

hostrf stores its config repo-locally under: ./.config/

1) Point this host at a RemoteRF server

HostRF requires a RemoteRF Server already setup. See RemoteRF-Server for additional details.

hostrf --config --addr <host:port>
# example:
hostrf -c -a 164.97.201.67:5000

Inspect/Reset server target:

hostrf -c -a --show         # Show addr 
hostrf -c -a --wipe -y      # Wipe config params