⚠️ UNTESTED — This implementation has not been verified against physical hardware. Code is complete but has not been bench-tested. Verify behavior before relying on output.
rf-bench-drivers-flipper
Flipper Zero USB driver for RF bench automation. Part of the rf_bench namespace package.
PyPI: rf-bench-drivers-flipper · Import: rf_bench.flipper · License: GPL-3.0-or-later
Hardware
| USB VID | USB PID | Linux device | Protocol |
|---|---|---|---|
| 0x0483 | 0x5740 | /dev/ttyACM0 |
CLI (text) + RPC (protobuf) |
Connect via the single USB-C port. The driver auto-detects by VID/PID.
Installation
pip install rf-bench-drivers-flipper
Or for local editable development:
pip install -e rf-bench-drivers-flipper --break-system-packages
Quick Start
from rf_bench.flipper import FlipperZero, FlipperError
import time
# Auto-detect connected Flipper
with FlipperZero() as fz:
print(fz.identify())
# Sub-GHz carrier
fz.subghz_tx_carrier(433_920_000)
time.sleep(1)
fz.subghz_stop()
# RSSI at 433.92 MHz
readings = fz.subghz_get_rssi(433_920_000, duration_s=0.5)
print(f"RSSI: {readings}")
# GPIO
fz.gpio_set_mode("PA4", "output")
fz.gpio_write("PA4", 1)
val = fz.gpio_read("PA6")
License
GPL-3.0-or-later
1 maintainer
Metadata
1 maintainer
Release files for rf-bench-drivers-flipper 0.2.1
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | Provenance | Actions |
|---|---|---|---|---|
| rf_bench_drivers_flipper-0.2.1.tar.gz | 24.8 kB | Without provenance | Details for rf_bench_drivers_flipper-0.2.1.tar.gz |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Actions Reset |
|---|---|---|---|---|
| rf_bench_drivers_flipper-0.2.1-py3-none-any.whl | Python 3 | none | any | Details for rf_bench_drivers_flipper-0.2.1-py3-none-any.whl |
Total release size: 49.3 kB
Release files / rf_bench_drivers_flipper-0.2.1.tar.gz
| Download URL | rf_bench_drivers_flipper-0.2.1.tar.gz |
|---|---|
| Size | 24.8 kB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
1e4dad61fac35e529ea58fbd556519ff5becc4a8df8161dcf0265d01c609f870
|
|
BLAKE2b-256 checksum How to use checksums |
03b3142a784c79bb3215724d119601a389b5ced7be8bcdcfb3d4936f45bb900c
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/6.2.0 CPython/3.14.5
|
Release files / rf_bench_drivers_flipper-0.2.1-py3-none-any.whl
| Download URL | rf_bench_drivers_flipper-0.2.1-py3-none-any.whl |
|---|---|
| Size | 24.4 kB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
609ab7f2a85c5e18b5e554b528203d401c346d2f60a751beccfecc9d3f1d0788
|
|
BLAKE2b-256 checksum How to use checksums |
3e897eac3a5999a889033c355601d7b3b06cd31c5cf3facaaa399b4afc77b684
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/6.2.0 CPython/3.14.5
|
Security for rf-bench-drivers-flipper 0.2.1
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
No provenance found
None of the files in this release were uploaded with provenance metadata.
A note on package security
PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.
To learn more about protecting yourself from malicious actors, visit our package security documentation.
