rf95modem-py

Python library to send and receive data over LoRa PHY via a serial connection to a rf95modem.

This library was tested against the rf95modem commit 8f163aa, slightly after version 0.7.3.

Install

This library is available on PyPI as rf95modem.

pip install --upgrade rf95modem

Library

The primary focus of this library is to send and receive data via LoRa's physical layer, LoRa PHY, with the help of a rf95modem.

Therefore the rf95modem.reader.Rf95Reader. allows direct interaction with a connected rf95modem, including configuration changes, sending, and receiving raw LoRa PHY messages. This Rf95Reader extends serial.threaded.LineReader from pySerial.

The following short code example demonstrates how to use this library.

import serial
import serial.threaded
import sys
import time
import threading

import rf95modem


if __name__ == "__main__":
    ser = serial.serial_for_url("/dev/ttyUSB0", baudrate=115200, timeout=1)
    with serial.threaded.ReaderThread(ser, rf95modem.Rf95Reader) as rf95:
        rf95.rx_handlers.append(lambda rx: print(rx))

        rf95.mode(rf95modem.ModemMode.MEDIUM_RANGE)
        rf95.frequency(868.1)

        print(rf95.status_fetch())

        try:
            rf95.gps_mode(True)
            print(rf95.gps_fetch())
        except rf95modem.Rf95UnknownCommandException:
            print("Seems like there is no GPS support")

        rf95.transmit(b"hello world")

        threading.Event().wait()

Documentation

pip install --upgrade pdoc3

cd src
pdoc --http 127.0.0.1:8080 rf95modem
xdg-open http://127.0.0.1:8080/

Build a Release

• Bump the project.version in the pyproject.toml file.
• python3 -m build