rigctl-mcp 1.0.0

MCP server for Hamlib rigctl radio control

Rigctl MCP Server

A Model Context Protocol (MCP) server for controlling Software Defined Radio (SDR) applications via the Hamlib rigctl protocol.

Overview

This MCP server provides AI assistants with the ability to control radio receivers and SDR software like SDR++, GQRX, and other Hamlib-compatible applications. It implements the rigctl network protocol, allowing frequency tuning, mode selection, and recording control.

Features

• Frequency Control: Set and query radio frequency in Hz
• Mode Control: Select demodulation mode (FM, WFM, AM, USB, LSB, CW, DSB, RAW)
• Recording Control: Start/stop audio recording
• Quick FM Tuning: Convenience tool for tuning FM broadcast stations (88-108 MHz)
• Timed Recording: Record audio for a specified duration with automatic start/stop

Supported Applications

Any application that supports the Hamlib rigctl network protocol:

• SDR++ - Popular cross-platform SDR application
• GQRX - Linux SDR receiver
• CubicSDR - Cross-platform SDR application
• rigctld - Hamlib network daemon for hardware radios

Installation

cd rigctl-mcp
pip install -e .

Setup

SDR++ Configuration

1. Open SDR++
2. Enable the Rigctl Server module in Module Manager
3. Configure rigctl settings:
   • Port: 4532 (default Hamlib port)
   • Bind Address:
     • 0.0.0.0 if using from Docker
     • 127.0.0.1 if running locally
4. Connect to your SDR device

Docker Note

If running the MCP server in Docker, the rigctl server must bind to 0.0.0.0 to be accessible from the container. Use host.docker.internal:4532 to connect from inside Docker.

Usage

Running the MCP Server

python server.py

The server communicates over stdio and can be integrated with MCP-compatible clients.

Desktop Client Configuration

Add to your MCP client configuration:

{
  "mcpServers": {
    "rigctl": {
      "command": "python",
      "args": ["/path/to/rigctl-mcp/server.py"]
    }
  }
}

Available Tools

Connection Management

connect

Connect to a rigctl server.

Parameters:

• host (optional): Server address (default: "host.docker.internal" for Docker)
• port (optional): Server port (default: 4532)

Example:

{
  "host": "localhost",
  "port": 4532
}

disconnect

Disconnect from the rigctl server.

get_status

Get current connection status.

Frequency Control

set_frequency

Set the radio frequency in Hz.

Parameters:

• frequency_hz (required): Frequency in Hz

Example:

{
  "frequency_hz": 100000000
}

Sets frequency to 100 MHz.

get_frequency

Get the current radio frequency.

Returns: Frequency in Hz and MHz.

tune_fm_station

Quick tune to an FM broadcast station (88-108 MHz).

Parameters:

• frequency_mhz (required): FM frequency in MHz (e.g., 88.5, 101.1)
• set_wfm_mode (optional): Auto-set WFM mode (default: true)

Example:

{
  "frequency_mhz": 88.0,
  "set_wfm_mode": true
}

Mode Control

set_mode

Set the demodulation mode and bandwidth.

Parameters:

• mode (required): FM, WFM, AM, USB, LSB, CW, DSB, or RAW
• bandwidth (optional): Bandwidth in Hz (0 for automatic)

Example:

{
  "mode": "WFM",
  "bandwidth": 200000
}

get_mode

Get the current demodulation mode and bandwidth.

Recording Control

start_recording

Start recording audio. The file is saved to the application's recording directory.

stop_recording

Stop recording audio.

record_audio

Convenience tool that tunes, sets mode, and records for a specified duration.

Parameters:

• frequency_hz (required): Frequency in Hz
• mode (optional): Demodulation mode
• duration_seconds (required): Recording duration (1-3600 seconds)

Example:

{
  "frequency_hz": 88000000,
  "mode": "WFM",
  "duration_seconds": 30
}

Records 30 seconds of 88 MHz in WFM mode.

Usage Examples

Tune to FM Station

# Connect to rigctl
connect("host.docker.internal", 4532)

# Tune to 88.5 FM
tune_fm_station(88.5)

# Or manually:
set_frequency(88500000)
set_mode("WFM", 200000)

Record Audio

# Quick recording (automatic tuning and timing)
record_audio(
    frequency_hz=101100000,
    mode="WFM",
    duration_seconds=60
)

# Manual recording control
set_frequency(88000000)
set_mode("WFM", 200000)
start_recording()
# ... wait ...
stop_recording()

Query Current Settings

# Get current frequency
get_frequency()
# Returns: "Current frequency: 88000000 Hz (88.000 MHz)"

# Get current mode
get_mode()
# Returns: "Current mode: WFM, bandwidth: 200000 Hz"

Rigctl Protocol

This server implements the Hamlib rigctl network protocol. Key commands:

• F <freq> - Set frequency in Hz
• f - Get frequency
• M <mode> <bw> - Set mode and bandwidth
• m - Get mode
• AOS / \recorder_start - Start recording
• LOS / \recorder_stop - Stop recording

Testing

Test scripts are included:

# Test connection and basic commands
python scripts/tests/test_rigctl.py

# Test FM tuning
python scripts/tests/test_fm.py

# Test recording
python scripts/tests/test_recording.py

Troubleshooting

Connection Refused

Problem: Cannot connect to rigctl server

Solutions:

• Verify SDR++ (or other application) is running
• Check rigctl server module is enabled
• Verify correct port (default: 4532)
• For Docker: ensure bind address is 0.0.0.0
• Try: ss -tln | grep 4532 to check if port is listening

Commands Not Working

Problem: Commands return errors or don't work

Solutions:

• Check application logs for errors
• Verify SDR is connected and working in the application
• Some commands may not be supported by all applications
• Try the command manually using telnet localhost 4532

Recording Directory

Audio recordings are saved to the application's configured recording directory:

• SDR++: Check Settings → Recording
• GQRX: Check File → Save options
• Default locations vary by platform

Technical Details

Protocol

Uses Hamlib rigctl protocol over TCP socket. Commands are ASCII text, responses are newline-terminated.

Threading

Socket operations are synchronous but the MCP server runs in an async context. Long-running operations (like timed recordings) use asyncio.sleep().

Error Handling

• Connection errors return user-friendly messages
• Invalid frequencies/modes are validated by the radio application
• Recording errors are reported but don't disconnect the client

References

• Hamlib Rigctl Documentation
• Hamlib Network Protocol
• SDR++ Rigctl Implementation
• Model Context Protocol