roboclaw-python 0.2.3

No project description provided

RoboClaw Encoder Interface

This project provides an interface for controlling and reading encoder values from RoboClaw motor controllers. It allows you to set motor speeds, control motor movement, and read encoder values with proper handling of overflow, underflow, and direction. Features

Control Motors: Set speed for individual motors (M1, M2).
Drive Both Motors: Control both motors at the same time with forward or backward movement.
Turn Both Motors: Control turning by adjusting motor speeds in opposite directions.
Read Encoder: Accurately read encoder values, adjusting for overflow and underflow.

Installation

pip install roboclaw-python

Usage

Example in Python using the PyO3 bindings

from roboclaw_python import RoboClaw, Motor

Initialize RoboClaw

roboclaw = RoboClaw(port_name="/dev/ttyUSB0", baud_rate=115200, timeout=20, retries=128, address=128)

Set motor speed

roboclaw.set_speed(Motor.M1, 100)

Read encoder value

encoder_value_m1 = roboclaw.read_encoder(Motor.M1)
print(f"Motor M1 Encoder: {encoder_value_m1}")

License

This project is licensed under the MIT License.