rp2040py

Raspberry Pi Pico (RP2040) Emulator in Python — a faithful port of rp2040js. It blinks, runs native code, and even the MicroPython REPL!

See docs/PORTING.md for the file-by-file port status against upstream rp2040js.

Installation

pip install rp2040py

or, with uv:

uv add rp2040py       # into a project
uv tool install rp2040py   # as a standalone CLI tool
uvx rp2040py ...           # run without installing at all

Any of these gives you the rp2040py console script (python -m rp2040py works identically), so the emulator is runnable without a git checkout - see Run the demo project below for the checkout-equivalent commands.

Run the demo project

The commands below assume rp2040py is installed (pip install rp2040py / uv add rp2040py / uv tool install rp2040py, or run ad hoc with uvx rp2040py ...). From a checkout of this repo instead, each maps 1:1 onto uv run python demo/*.py (demo/*.py are thin wrappers around the same src/rp2040py/cli code):

Native code

You'd need to get hello_uart.hex by building it from the pico-examples repo, then copy it to the rp2040py root directory and run:

rp2040py run
# or, without installing:
uvx rp2040py run

You can also specify the path to the image on the command line and/or load a UF2 image:

rp2040py run --image ./my-pico-project.uf2

A GDB server will be available on port 3333, and the data written to UART0 will be printed to the console.

MicroPython code

No manual download needed: just run

rp2040py micropython
# or, without installing:
uvx rp2040py micropython

and enjoy the MicroPython REPL! Quit the REPL with Ctrl+X. The first run fetches the recommended MicroPython build (1.21.0, currently) from micropython.org into ~/.cache/rp2040py and reuses that cached file afterwards (falls back to the current directory if the cache directory isn't writable). 1.21 is recommended: it does far less work before dropping to the REPL prompt than newer releases, so it boots dramatically faster in the emulator (see the benchmark below). Newer releases work too, just slower to reach the REPL - e.g. 1.28.0.

A different version, a local UF2 file, or a CircuitPython version (--circuitpython, see below) can be loaded by supplying the --image option - a known version tag (1.28.0), or a path to a UF2 file already on disk:

[!TIP] Booting real firmware means executing millions of Thumb instructions through a pure-Python interpreter, which is dramatically slower than V8 JIT-compiling the equivalent JS in rp2040js. Measured with demo/benchmark.py booting MicroPython 1.28 + littlefs, then running a typical resident script (while True: print(...); time.sleep(1), same as ci-micropython.yml's fixture) to its first output:

Interpreter	Time
CPython 3.10	188.98s
CPython 3.14 + PYTHON_JIT=1	113.77s (~1.7x)
PyPy 3.10	11.59s (~16x)

For CPU-bound runs, PyPy is the clear winner: uv run --python pypy3.10 --no-dev -- rp2040py micropython ... (or ... -- python demo/micropython_run.py ... from a checkout). See docs/PORTING.md for the full breakdown (including a synthetic instructions/sec benchmark) and CI's python_runtime matrix, which tests all three.

This is also why 1.21 is the recommended version: reaching the bare REPL prompt is fast on both 1.21 and 1.28 (well under a second, whether or not a littlefs main.py auto-runs first) - the gap above is specifically about running a script shaped like the one above afterward. On the same machine and CPython 3.10, that same script reaches its first print() in 3.72s (1,418,835 steps) under 1.21 versus 188.98s (64,679,599 steps) under 1.28 - identical instruction counts run-to-run (this is deterministic, not host-speed noise), so the ~45x gap is a real difference in how much work 1.28 does per loop iteration, not an emulator bug: profiling shows the core essentially never reaches WFI/idle during that time, so it's real Thumb instructions being interpreted, not something hanging. 1.28 still boots and mounts a mklittlefs-built littlefs image correctly (that's exactly the version pinned disk_version fixed compatibility for, see below); it's simply much more expensive to actually run typical resident scripts on.

rp2040py micropython --image 1.28.0
rp2040py micropython --image my_image.uf2

A GDB server on port 3333 can be enabled by specifying the --gdb flag:

rp2040py micropython --gdb

For using the MicroPython demo code in tests, --expect-text can come in handy: it will look for the given text in the serial output and exit with code 0 if found, or 1 if not found. You can find an example in the MicroPython CI test.

For one-shot, non-interactive runs (like micropython's own CLI), pass one of -c <command>, -m <module>, or a script <filename> - mutually exclusive, matching [-c <command> | -m <module> | <filename>]. Instead of dropping into the REPL, rp2040py boots the device, runs it via the raw-REPL protocol, prints its stdout/stderr, and exits with the device's exit status (0 on success, 1 if it raised):

rp2040py micropython -c "print(1 + 1)"
rp2040py micropython -m sys
rp2040py micropython path/to/script.py

Filesystem support

With MicroPython, you can use the filesystem on the Pico. This becomes useful as more than one script file is used in your code. Just put a LittleFS formatted filesystem image called littlefs.img into the rp2040py root directory, and your main.py will be automatically started from there. A different path can be supplied with --littlefs (it's silently skipped, not an error, if the file doesn't exist).

The mklittlefs subcommand builds such an image (requires the optional fs extra: pip install rp2040py[fs] / uv sync --extra fs). Every file keeps its own basename; pass --main to mark one of them as main.py (auto-run on boot) - omit it entirely for a filesystem with no auto-run script, e.g. modules staged for a raw-REPL-driven test, or omit files entirely for an empty formatted image. Always builds fresh - pass -f/--force to overwrite an existing --output (there's no "add these files to the existing image" mode; rebuild from the full file list):

rp2040py mklittlefs -o littlefs.img your_main.py your.py files.py here.py --main your_main.py
rp2040py mklittlefs -o littlefs.img --force your_main.py --main your_main.py  # to overwrite it later

--disk-version {2.0,2.1} selects the littlefs on-disk format (defaults to 2.0): MicroPython <=1.21's bundled littlefs can only mount 2.0, while 1.28's reads both - see docs/PORTING.md for why.

Currently, the filesystem is not writeable, as the SSI peripheral required for flash writing is not implemented yet.

CircuitPython code

To run the CircuitPython demo, follow the directions above for MicroPython but add --circuitpython:

rp2040py micropython --circuitpython

and start the CircuitPython REPL! As with MicroPython, the firmware (8.0.2 by default) is downloaded automatically on first use; a different version or a local file can be given via --image (e.g. --image 10.2.1 or a path to an already-downloaded UF2). The rest of the experience is the same as the MicroPython demo (Ctrl+X to exit, the --gdb option, etc).

Filesystem support

For CircuitPython, you can create a FAT12 filesystem in Linux using the truncate and mkfs.vfat utilities:

truncate fat12.img -s 1M  # make the image file
mkfs.vfat -F12 -S512 fat12.img  # create the FAT12 filesystem

You can then mount the filesystem image and add files to it:

mkdir fat12  # create the mounting folder if needed
sudo mount -o loop fat12.img fat12/  # mount the filesystem to the folder
sudo cp code.py fat12/  # copy code.py to the filesystem
sudo umount fat12/  # unmount the filesystem

While CircuitPython does not typically use a writeable filesystem, note that this functionality is unavailable (see the MicroPython filesystem support section for more details).

Kaluma (other USB-CDC firmware, not MicroPython/CircuitPython)

rp2040py's USB/CDC emulation isn't MicroPython-specific - any firmware presenting a CDC-ACM serial console works the same way underneath. The kaluma subcommand runs Kaluma (a JavaScript runtime for RP2040), verified against 1.2.1 - it boots, USB enumerates, and evaluates real JS at its REPL prompt (e.g. sending 1+1 gets back 2):

rp2040py kaluma
# or, without installing:
uvx rp2040py kaluma
rp2040py kaluma --image 1.2.1
rp2040py kaluma --image my_kaluma_image.uf2

As with micropython, missing firmware is downloaded automatically (1.2.1 by default - the newest release still shipping a plain, non--w, RP2040 pico build; 1.3.0+ only ships pico2/pico2-w). Ctrl+X to exit, same as the MicroPython demo. Unlike micropython, kaluma is interactive-only - Kaluma has no raw-REPL-equivalent protocol, so there's no -c/-m/<filename>.

An optional <script.js> positional stages a local file into Kaluma's "user program" flash region before boot - the same one kaluma flash <file> writes to on real hardware, which Kaluma auto-executes on every boot:

rp2040py kaluma your_script.js

Give it a few real seconds after connecting before expecting output - like MicroPython, booting real firmware through an interpreted emulator takes actual wall-clock time (JerryScript engine init, then running your script), not something --expect-text needs to work around, just something to expect if driving this non-interactively.

Separately, Kaluma has its own pluggable littlefs-backed filesystem (see its docs), mounted from a 512K region of flash with 4096-byte blocks - a different flash region than the user-program one above, with no auto-run semantics of its own (plain storage, accessible from JS via require('fs')). Build a compatible image with mklittlefs and pass it via --littlefs (defaults to kaluma_littlefs.img - a different default than MicroPython's littlefs.img, since the block size/count differ):

rp2040py mklittlefs -o kaluma_littlefs.img --block-size 4096 --block-count 128 your_script.js
rp2040py kaluma --littlefs kaluma_littlefs.img

[!NOTE] Kaluma's own board.js tries to mount this filesystem unconditionally at startup and currently fails in this emulator regardless of whether --littlefs is given - logging Bad block at 0x0/ Superblock 0x0 has become unwritable/Error: No space left on device (reproduced even against a validly-built mklittlefs image, not just blank flash) - root cause not yet identified. Purely cosmetic so far: Kaluma catches and prints the error without aborting, so boot and <script.js> auto-run both continue normally past it.

Kaluma prints its "Welcome to Kaluma" banner exactly once, right at boot - but that's before the emulated USB-CDC connection to the host is actually up, so (same as real hardware racing a host terminal that isn't already attached - Kaluma's own docs: "if you cannot see the prompt, press Enter several times") those bytes are typically gone by the time anything's listening. kaluma doesn't send anything to work around this - type .hi yourself at the prompt to reprint the same banner on demand if you need to see it; if you're scripting against a device's output instead of typing at it interactively, stage a <script.js> and match against its output, which isn't racy (see the Kaluma CI test, which does exactly that).

Bootrom revisions

run, micropython, kaluma, and bench all boot a fixed bootrom (B1, bundled - no download needed) by default. --bootrom picks a different one: a b0/b1/b2 version tag (downloaded automatically from Raspberry Pi's pico-bootrom-rp2040 releases and cached locally, same as --image), or a local .elf/.bin path:

rp2040py micropython --bootrom b2
rp2040py micropython --bootrom path/to/custom.elf

Raspberry Pi only publishes .elf for each revision - pyelftools (a normal dependency, not an extra: it's a pure-Python wheel with no platform-specific build to justify gating it) parses out the ROM image on the fly, no separate conversion step needed. A local .bin (e.g. produced with objcopy -O binary) is loaded directly with no parsing at all.

Library API

Everything above is the CLI, but the emulator is also usable programmatically - e.g. to run code against a device and check its output the way Thonny does over a real serial port, from a test suite or another tool. rp2040py.device.MicroPythonDevice boots a UF2 image and lets you run code on it via the same raw-REPL protocol mpremote run/tools/pyboard.py use, interrupting anything already running on the device first (e.g. an auto-run main.py from a littlefs image).

Blocking (exec()/exec_file()) is the simplest form - each call returns once the device finishes, or raises TimeoutError after timeout elapses (30s by default, since unlike the CLI there's no Ctrl+C to fall back on):

from rp2040py.device import MicroPythonDevice

with MicroPythonDevice("RPI_PICO-20231005-v1.21.0.uf2") as device:
    stdout, stderr = device.exec("print(1 + 1)")
    assert stdout == b"2\r\n"

    stdout, stderr = device.exec_file("my_script.py")

Callback style, via exec_async()'s concurrent.futures.Future - no separate API needed, Future.add_done_callback() does this out of the box:

def on_done(future):
    stdout, stderr = future.result()
    print(stdout.decode())


device.exec_async("print(1 + 1)").add_done_callback(on_done)

asyncio, via astart()/aexec()/aexec_file():

async def main():
    async with MicroPythonDevice("RPI_PICO-20231005-v1.21.0.uf2") as device:
        stdout, stderr = await device.aexec("print(1 + 1)")

All of these - blocking, callback, and asyncio - share one ThreadPoolExecutor(max_workers=1) per device: since the device only has a single REPL channel and can't run two exec()s at once, calling exec_async()/aexec() again before a previous call finishes doesn't raise, it just queues behind it and runs once its turn comes. This is exactly what powers the CLI's own micropython -c/-m/<filename> batch mode - it's a caller of this same API, not a separate implementation. start()/start_async()/stop() are available directly if you want more control over the lifecycle than the context manager gives you.

Used by

• ballistics-lab/micropython-bclibc — tests its RP2040 usermod/natmod builds in CI by actually booting real firmware through this emulator (o-murphy/rp2040py/.github/actions/setup-rp2040py), not just compiling it.

Learn more

• rp2040js — the upstream TypeScript emulator this project is ported from.
• docs/PORTING.md — port status, file by file.

License

Released under the MIT license. Copyright (c) 2021, Uri Shaked. Copyright (c) 2026, Dmytro Yaroshenko.