rplidarc1 0.1.2

A high-performance Python library for interfacing with the RPLidar C1 360-degree laser scanner. This library provides a fully asynchronous API for non-blocking operation, enabling efficient control of the RPLidar device and real-time processing of scan data. Built with modern Python async/await syntax and designed with minimal external dependencies (only pyserial required), it offers a lightweight yet powerful solution for robotics and sensing applications.

RPLidarC1

A Python library for interfacing with the RPLidar C1 360-degree laser scanner. This library provides an asynchronous API for controlling the RPLidar device and processing scan data.

Features

• Asynchronous API for non-blocking operation
• Simple interface for connecting to and controlling the RPLidar device
• Health status checking
• Device reset functionality
• Scan data processing with angle and distance measurements
• Support for both queue-based and dictionary-based data output

Requirements

• Python 3.10+ (for asyncio TaskGroup support)
• pyserial

Installation

# Clone the repository
git clone https://github.com/dsaadatmandi/rplidarc1.git
cd rplidarc1

# Install dependencies
pip install pyserial

Usage

Basic Usage

from scanner import RPLidar
import asyncio

# Initialize the RPLidar with the appropriate port and baudrate
lidar = RPLidar("/dev/ttyUSB0", 460800)

# Perform a simple scan
async def scan_example():
    # Start a scan and get the coroutine
    scan_coroutine = lidar.simple_scan()
    
    # Create a task to process the scan data
    async with asyncio.TaskGroup() as tg:
        tg.create_task(scan_coroutine)
        # Add other tasks as needed
    
    # Reset the device when done
    lidar.reset()

# Run the example
try:
    asyncio.run(scan_example())
except KeyboardInterrupt:
    # Ensure proper shutdown on keyboard interrupt
    lidar.reset()

Processing Scan Data

from scanner import RPLidar
import asyncio

lidar = RPLidar("/dev/ttyUSB0", 460800)

async def process_scan_data():
    # Start a scan with dictionary output
    async with asyncio.TaskGroup() as tg:
        # Create a task to stop scanning after 5 seconds
        tg.create_task(wait_and_stop(5, lidar.stop_event))
        
        # Create a task to process data from the queue
        tg.create_task(process_queue(lidar.output_queue, lidar.stop_event))
        
        # Start the scan with dictionary output
        tg.create_task(lidar.simple_scan(make_return_dict=True))
    
    # Access the scan data dictionary
    print(lidar.output_dict)
    
    # Reset the device
    lidar.reset()

async def wait_and_stop(seconds, event):
    await asyncio.sleep(seconds)
    event.set()

async def process_queue(queue, stop_event):
    while not stop_event.is_set():
        if not queue.empty():
            data = await queue.get()
            # Process the data
            print(f"Angle: {data['a_deg']}°, Distance: {data['d_mm']}mm, Quality: {data['q']}")
        else:
            await asyncio.sleep(0.1)

# Run the example
try:
    asyncio.run(process_scan_data())
except KeyboardInterrupt:
    lidar.reset()

API Reference

RPLidar Class

RPLidar(port="/dev/ttyUSB0", baudrate=460800, timeout=0.2)

Parameters:

• port (str): Serial port to connect to
• baudrate (int): Baud rate for the serial connection
• timeout (float): Timeout for serial operations

Methods:

• healthcheck(): Check the health status of the device
• shutdown(): Properly shut down the device
• reset(): Reset the device
• simple_scan(make_return_dict=False): Start a scan and return a coroutine for processing scan data
  • make_return_dict (bool): If True, scan data will also be stored in output_dict

Properties:

• output_queue (asyncio.Queue): Queue containing scan data
• output_dict (dict): Dictionary containing scan data (angle -> distance)
• stop_event (asyncio.Event): Event to signal stopping the scan

Data Format

Scan data is provided in the following format:

{
    "a_deg": 45.33,  # Angle in degrees (0-360)
    "d_mm": 1250,    # Distance in millimeters
    "q": 15          # Quality of the measurement (0-63)
}

Project Structure

• scanner.py: Main RPLidar class implementation
• protocol.py: Implementation of the RPLidar communication protocol
• serial_handler.py: Serial connection management
• utils.py: Utility classes and functions
• examples/: Example scripts demonstrating usage
• tests/: Unit and integration tests

Testing

The project includes a comprehensive test suite that covers all major components of the library. The tests use pytest and mock the hardware to allow testing without an actual RPLidar device.

Running Tests

To run the tests, first install the testing dependencies:

pip install -r requirements.txt

Then run the tests using pytest:

pytest

For more information about the tests, see the tests README.

License

MIT License

Contributing

Contributions are welcome! Please feel free to submit a Pull Request.