rsyncdirector 0.0.1

A tool to orchestrate rsyncing of data between multiple machines and instances of rsyncdirector

# RsyncDirector

Automate and coordinate the running of rsync jobs on multiple Linux hosts with a cron syntax schedule.

## Overview

rsyncdirector enables multiple rsync jobs, running locally or remotely, to synchronize on lock files, local or remote, to ensure that data is only mutated by one rsync process at a time.

For example: Every 24 hours rsyncdirector runs on laptop01 backing up data to a backup01. Both machines are in the same physical location. Every 7 days an instance of rsyncdirector on backup01 rsync`s all of its data to `backup-remote which is at a remote site. Before the instance of rsyncdirector on laptop01 starts syncing data to backup01 it checks to see if a lockfile exists in a predefined location on backup01. If it exists, it indicates that backup01 is currently syncing data and the laptop01 rsyncdirector waits a configured amount of time and then re-checks, until the lock file no longer exists, or a configured timeout exipres. Once the laptop01 rsyncdirector sees that the lockfile on backup01 is gone, it writes a lockfile to backup01 and starts rsync`ing data from itself to `backup01. In this way, multiple rsyncdirector instances can be run across multiple hosts and coordinate so that data is not mutated at the same time.

rsyncdirector runs as a systemd service via a template unit file to enable running multiple rsyncdirector instances on a single host.

rsyncdirector communicates to remote hosts over SSH using the Python [Fabric](https://www.fabfile.org/) library which depends on the Python [Paramiko](https://www.paramiko.org/) library for the core SSH protocol implementation. SSH connections are currently authenticated using passphrase-less SSH keys.

rsync functionality is implemented by the underlying rsync package installed on the host.

Each instance can be configured to run under any arbitrary user and connect to any remote host that it can reach with the supplied credentials. The user under which it runs must have read permissions for the files that it is configured to rsync. The administrator must distribute public SSH keys to the hosts to which data is to be rsync`ed and can optionally specify a private key other than the `rsyncdirector user’s default set of private keys.

See the annotated, [example config file](rsyncdirector/resources/rsyncdirector.yaml) for details on how to configure an instance of rsyncdirector.

There is a companion program, [rsyncdirector_deploy](https://github.com/rchapin/rsyncdirector_deploy), to assist in the installation and deployment of configurations of rsyncdirector.

## Key Concepts

Much of the following concepts map to specific configuration parameters.

### cron_schedule Each rsyncdirector instance requires defining a peridocity for which it will run by defining a cron expression in the config which uses the same syntax as a standard Linux cron job.

### job Each job encapsulates n number of rsync commands that either sync data between directories on the localhost or sync data to a single remote host. The job defines the specifics for connecting to a remote host if the job type is remote.

### syncs syncs define the specific rsync command to be run. Each “inherits” the definitions of the job to enable the concatenation of the rsync command to include the specified user, host, and port information for remote jobs. The source and dest are self-explanatory, and the opts list enables the inclusion of any arbitrary options that the undelying rsync implementation on the host allows.

### lock_files lock_files define an arbitrary number of files that will be created on either the localhost or remote host(s) to signal to other rsyncdirector instances that a given instance is running.

### blocks_on blocks_on define an arbitrary number of lock_files from other rsyncdirector instances that the job will wait on before continuing with the job.

## Metrics

rsyncdirector exposes metrics via the prometheus_client via http://$host:$port/metrics. By default, it will listen on port 9090 and can be overridden.

## Installing

There is a companion program, [rsyncdirector_deploy](https://github.com/rchapin/rsyncdirector_deploy), that contains all of the configuration templates and automation to assist in the installation and deployment of configurations of rsyncdirector.

The easiest way to install and configure it is with the aformentioned program. If you want to install it by hand, you will need to get the configuration templates from the rsyncdirector_deploy repo.

## Building, Developing, and Testing

This requires a compatible version of Python in your path from which the path to the interpreter can be gleaned by running which python<version>. See the requires-python entry in pyproject.toml at the root of the repo for the currently required version of Python.

Once that is installed, run ./run-tests.sh –dev-setup to create a development virtual environment.

### Building a Distribution

` python -m build twine check dist/* `

#### Uploading to PyPi

Generate an API token and add the requisite [pypi] entry to the ~/.pypirc file ` [pypi] username = __token__ password = <API-token> ` Then upload the artifacts to PyPi ` python -m twine upload --repository pypi dist/* `

#### Uploading to Nexus

In my case, I have an instance of Nexus running in my network with a ~/.pypirc file configured for it and publish the artifacts there with the following command: ` twine upload --cert <path-to-nexus-cert>--verbose --repository pypi-[dev|release] dist/rsyncdirector-<version>.tar.gz `

### Running the Tests

The integration tests require that the user running the tests can ssh to root@localhost witout having to enter the password. To do so add a public ssh key of the user running the tests to the authorized keys of the root user on the localhost.

Then, from the root of the repo run ` ./run-tests.sh `

### Setting Up to Run and Debug Integration Tests in VSCode

The requisite configs are already present in the provided .vscode/settings.json file.

1. Export the path to the required version of Python that you want to use. If you already have one that will suffice, skip this step.

   ` export RSYNCDIRECTORINTTEST_PYTHON=<path-to-python-binary> `

1. Setup the test environment. The following will create a .env file at the root of the repository that VSCode will read while running the tests and build the test containers.

   ` ./run-tests.sh --dev-setup `

1. Configure VSCode

   1. Press CTRL+SHIFT+P and select Python: Configure Tests 1. Select pytest. Even though we are using the unittest library for testing this seems to be the only test configuration in VSCode that works for running and debugging the tests for the time being. 1. Choose rsyncdirector as the root directory for the tests 1. Click on the Testing icon in the left-hand side-bar and you should see a list of all of the tests that you can now run or debug.

   > If you do not see any tests listed or see an error in the panel check the Output Panel and select Python from the dropdown menu for any relevant error messages.

1. Update env vars so that existing test timeouts don’t result in Exceptions while you are stepping through the code: There are a number of env vars written to the .env file that determine timeouts for various waits in the test code. When running the whole test suite, the defaults in the .env file are fine. When stepping through the code in the IDE these timeouts can expire and throw Exceptions when nothing has yet gone wrong and get in your way of debugging the code. To avoid this, edit the .env file and update the following env vars setting to the following suggested values. If you re-run run-tests.sh –dev-setup it will overwrite your changes to the .env file.

   1. RSYNCDIRECTORINTTEST_WAITFOR_TIMEOUT_SECONDS=1000

### Setting up to Develop in VSCode

1. Install the Black Formatter extension from Microsoft. 1. Open a Python file in VS Code. 1. Right-click on the editor to display the context menu. 1. Select Format Document With…. 1. Select Configure Default Formatter… from the drop-down menu. 1. Select black as your preferred formatter extension from the list.

### Dependency Management

First-order dependencies for requirements.txt, requirements_test.txt, are defined in the respective .in files. If you make updates to the first order dependencies you need to “compile” the full dependency list. First, ensure that pip-tools is installed in your dev virtual environment. dev dependendies are just defined in requirements_dev.txt. ` pip install .[dev] pip install .[test] `

Then run the following ` pip-compile -v --no-emit-trusted-host --no-emit-index-url requirements.in pip-compile -v --no-emit-trusted-host --no-emit-index-url requirements_test.in `

## Notes

[This is the solution for terminating a multi process/thread in Python](https://cuyu.github.io/python/2016/08/15/Terminate-multiprocess-in-Python-correctly-and-gracefully). It was the solution for being able to kill a running rsync job. Actually run the rsync command in a separate process that I can then kill if we receive a SIGTERM for the parent process.