rubycond_cb 0.2.0

Tool for calibrating a spectrometer wavelengths

Rubycond_CB

Tool for calibrating the spectrometer wavelengths

Manual

1. Select the Neon line on the left graph and the corresponding peak on the right graph.
   The program automatically performs a peak fit within the pixel window defined in Delta (pixels), default 20 pixels.

2. Add the pair of points using the ADD button. The points used for calibration are indicated on both the graphs and the table on the left.

3. Repeat the operation, adding as many peaks as possible.

4. Use the Simple Calib button to perform the calibration.
   The calibration result is displayed in the left graph, and the fit result is shown in the Fit Output window.

5. Use the Accept button to send the calibration parameters to the main program

Install

Use pip to install the program within a virtual environment (strongly recommended).
Here's a short tutorial on installing a virtual environment.

pip install rubycond_CB

About

Author

Yiuri Garino

Contacts

Yiuri Garino

• [e-mail]

Silvia Boccato

• [e-mail]

Cellule Projet @ IMPMC

License

Rubycond_CB: Tool for calibrating the spectrometer wavelengths

Copyright (c) 2022-2026 Yiuri Garino

Rubycond_CB is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see https://www.gnu.org/licenses/.

Release notes

Version 0.2.0 Release 260301: First release