Skip to main content

runspec-scheduler

Cron, but limited to runspec runnables installed in one venv.

Shared, always-on schedules for the runnables installed in one venv, independent of any desktop console. Each venv picks a backend:

  • cron (default): sync writes marked lines into the user crontab. Nothing else runs.
  • daemon: a long-running runspec-scheduler run per venv fires the schedules itself. It adds every intervals, catch_up, a heartbeat that status reads, and a missed fire is recorded instead of lost.

Either way every fire runs runspec exec --label sched:<id> --lock …, so it is one recorded run (exit code + captured output) in the venv's History. It is itself a runspec runnable, so runspec-console can detect it, but discoverable = false keeps it out of the Forms tab / runspec serve MCP surface.

Why

A console-driven schedule only fires while the desktop console is open, and it's per-operator. runspec-scheduler gives you shared, always-on schedules that live on the host and run whether or not a console is connected.

Install

# Into the same venv whose runnables you want to schedule, as the venv owner:
pip install runspec-scheduler
runspec-scheduler use daemon                  # skip this to stay on host cron
runspec-scheduler install-service             # shows the keeper it would set up
runspec-scheduler install-service --write     # sets it up and starts the daemon

The daemon runs as the venv owner, one per venv. Something has to start it at boot and restart it when it dies: the keeper. install-service picks one (--manager auto) or takes the one you name:

--manager needs what it sets up
systemd-user lingering on, systemd newer than 219 ~/.config/systemd/user/runspec-scheduler-<venv>.service, enabled with systemctl --user enable --now
supervisor pip install 'runspec-scheduler[supervisor]' supervisord inside the venv ({venv}/supervisor/), started at boot and checked every 5 minutes from your crontab
cron crontab run --detach at boot and every 5 minutes; a second start is a no-op, so a crashed daemon is back within 5 minutes
systemd root, once a system unit with User=<owner>; only printed (root runs the steps it lists), never written to /etc

auto takes systemd-user when lingering is on and the --user manager answers, else supervisor when supervisord is in the venv, else cron, and says why. --manager supervisor --system prints a program block for the host's own supervisord instead.

Nothing changes without --write: the result lists the files, crontab lines, commands and the steps root has to run. Crontab lines are tagged # runspec:scheduler-keeper:<venv>, separate from the cron backend's lines.

runspec-scheduler install-service --remove            # what removing would do
runspec-scheduler install-service --remove --write    # remove every keeper, stop the daemon

Run --remove --write before deleting a venv, so no keeper restarts a daemon from a folder that is gone. status lists the keepers under keeper.

After upgrading runspec-scheduler, restart the daemon so it runs the new code (status shows restart_needed until you do). restart goes through the keeper the venv has: systemctl --user restart, supervisorctl restart, or for the cron watchdog (or no keeper) stop + run --detach. Fires already running carry on and are still recorded. A system unit only root can restart.

runspec-scheduler restart --dry-run    # what it would do
runspec-scheduler restart              # restart, wait for the first heartbeat

Running the daemon as a service account

systemctl --user needs the account's own user session (XDG_RUNTIME_DIR + D-Bus). A bare sudo -u <acct> doesn't set that up, so systemctl fails with "Failed to connect to bus: No medium found." Run from a login shell and ask root to enable lingering:

sudo loginctl enable-linger serviceacc
sudo -iu serviceacc runspec-scheduler install-service --manager systemd-user --write
sudo -iu serviceacc systemctl --user status runspec-scheduler-<venv>

If lingering is already on, install-service recovers XDG_RUNTIME_DIR from /run/user/<uid> on its own; otherwise it returns a hint with the commands above. Without root, use --manager supervisor or --manager cron.

Use

runspec-scheduler add --id nightly --runnable backup --cron '0 2 * * *'
runspec-scheduler add --id poll   --runnable healthcheck --every 15m --args '{"level":"warn"}'   # daemon only
runspec-scheduler add --id report --runnable report --cron '0 6 * * *' --timeout 30m --catch-up
runspec-scheduler list
runspec-scheduler status
runspec-scheduler run-now --id poll
runspec-scheduler run-now --id nightly --detach   # start it in the background and return
runspec-scheduler remove --id poll
runspec-scheduler use daemon        # or: use cron
  • Exactly one of --cron (5-field cron) or --every (15m / 1h / 1d; daemon backend only).
  • --args is a JSON object passed to the target runnable.
  • --timeout stops a fire that runs longer (daemon default 6h; 0 = no limit).
  • --catch-up runs one fire straight away when the daemon starts after that schedule's fire was due (it was down, the host rebooted). Without it a missed fire is recorded as skipped.
  • The daemon picks up config changes within a few seconds, or at once on SIGHUP. On the cron backend run sync after editing.
  • run-now --detach starts the fire as a scheduled fire would run it (the schedule's run_as on cron, the venv owner on the daemon) in its own session, so it carries on after you log out; its run is recorded like any other fire.
  • Credentials for scheduled fires go in {venv}/runspec_schedules.env (mode 600, owned by the account the fires run as), not .runspec_env: every fire loads it on top of .runspec_env, and interactive runs in the venv never see it. The console's Env files window edits both.
  • Every fire's run carries a trigger saying what started it: schedule:cron, schedule:daemon or schedule:run-now.

Config

Schedules live in {venv}/runspec_scheduler.toml (override with --config or $RUNSPEC_SCHEDULER_CONFIG):

[scheduler]
backend = "daemon"        # or "cron" (default)
timeout = "6h"            # default per fire; 0 = no limit
misfire_grace = "5m"      # a fire later than this is recorded as missed
catch_up_window = "1d"    # how far back catch_up looks

[[schedule]]
id = "report"
runnable = "report"
cron = "0 6 * * *"
timeout = "30m"
catch_up = true

Change the [scheduler] durations with settings (the daemon reloads them by itself; use switches the backend):

runspec-scheduler settings                                  # show them
runspec-scheduler settings --timeout 2h --misfire-grace 10m # change two

The daemon writes a heartbeat to {venv}/logs/scheduler_state.json and a rotating log to {venv}/logs/scheduler.log; runspec-scheduler status reads both. Only one daemon runs per venv (an flock on runspec_scheduler.lock).

A fire that times out is stopped by runspec exec, then the daemon kills what is left of its process group. For a run_as fire escalated through sudo, children running as that other account can outlive the timeout.

Credentials (run_as runnables)

runspec-console can attach service-account credentials to a remote schedule. For a runnable that declares run_as, the selected credentials are written to a 600 env file owned by the run_as account in that account's home; the daemon points RUNSPEC_ENV_FILE at it and escalates to run_as when firing. Credentials are never placed on a command line. This requires the daemon/SSH user to have passwordless sudo -u <run_as> (the same precondition as running that run_as runnable at all).

Runnables without run_as run as the daemon's own user with the daemon's environment (systemd EnvironmentFile) — no console credential injection.

Metadata

Release files for runspec-scheduler 0.7.3

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for runspec-scheduler 0.7.3
File Size Uploaded Provenance Actions
runspec_scheduler-0.7.3.tar.gz 98.0 kB With provenance Details for runspec_scheduler-0.7.3.tar.gz

Built distribution (wheel)

Table of built distributions (wheels) for runspec-scheduler 0.7.3
File Interpreter ABI Platform Actions
runspec_scheduler-0.7.3-py3-none-any.whl Python 3 none any Details for runspec_scheduler-0.7.3-py3-none-any.whl

Total release size: 168.6 kB

Release files / runspec_scheduler-0.7.3.tar.gz

Download URL runspec_scheduler-0.7.3.tar.gz
Size 98.0 kB
Tags Source
SHA-256 checksum
How to use checksums
3d7a325ab3fe4ab5071c7b8b64044a949c3f1c4efc498587a8fdb9c55732f972
BLAKE2b-256 checksum
How to use checksums
f24baab0def24505d4892434114ed5823ff0887394abbb4842b882f775f4c4f8
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 7, 2026.

Transparency log

Release files / runspec_scheduler-0.7.3-py3-none-any.whl

Download URL runspec_scheduler-0.7.3-py3-none-any.whl
Size 70.6 kB
Tags Python 3
SHA-256 checksum
How to use checksums
9e2a1b03e35881855806e9d2d181124b8f6a499e964d05ec793a356c32fa7f49
BLAKE2b-256 checksum
How to use checksums
f58a9cc7aee637a5beef60dc5e09c2ae5c98c02ed2208f71ba3e74c3911f7a00
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/7.0.0 CPython/3.13.16

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 7, 2026.

Transparency log

Security for runspec-scheduler 0.7.3

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

Full provenance

Both files in this release have been uploaded with provenance metadata.

Select from 2 files

Attestation for runspec_scheduler-0.7.3.tar.gz

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Nov 7, 2026.

Transparency log

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

To learn more about protecting yourself from malicious actors, visit our package security documentation.

Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page