rustymath

rustymath gives you fast maths functions for arrays of floats, in Rust and in Python with NumPy. It covers the elementary functions, such as exp, log, sin and pow, at 16, 32 and 64 bits. Most of them also take complex numbers. It also has special functions such as gamma and erf, probability distributions, polynomials, number theory, and APL-inspired tolerant comparison.

In Rust, you call each function on single values inside your own loops, or through an object that runs it over a whole slice. In Python, each maths function is a NumPy ufunc.

rustymath gives up the last bits of accuracy for speed. Every function is within 4 units in the last place (ulps) of the correctly rounded result. At 32 bits, most functions run two to six times as fast as the standard library’s versions.

Install

Install the Python package from PyPI. For Rust, see Using rustymath from Rust.

pip install rustymath

Using rustymath from Python

The maths functions are NumPy ufuncs. Each takes arrays of any shape, broadcasts them as NumPy does, and gives a result of the same width. A complex array works wherever the function has complex values. An integer array works wherever NumPy’s version takes one. add, multiply, maximum and minimum have reduce and accumulate methods that run rustymath’s vectorized sums, products, maximums and minimums. Import rustymath beside NumPy:

import numpy as np, rustymath as rm

Where NumPy has a function, rustymath uses the same name and arguments. To switch, you change only the import. Here exp keeps the 32-bit width of its argument:

x = np.linspace(0, 2, 5, dtype=np.float32)
rm.exp(x)

array([1.       , 1.6487211, 2.718282 , 4.4816885, 7.389056 ],
      dtype=float32)

To check the accuracy yourself, compare with NumPy. np.spacing gives the size of one ulp at each value. Dividing the difference by it gives the distance between the two results in ulps:

xs = np.linspace(-10, 10, 100_001)
y = np.exp(xs)
(np.abs(rm.exp(xs) - y) / np.spacing(y)).max()

np.float64(2.0)

Functions that NumPy lacks keep their own names. root(n, y) gives the nth root of y:

rm.root(3, np.array([8., 27., 1000.]))

array([ 2.,  3., 10.])

The Rust names follow Rust’s standard library instead. Python’s log, power, arcsin and arctan2 are Rust’s ln, pow, asin and atan2.

Complex numbers

A complex array gives complex results, at each function’s principal value. For exp, log, power, sin, cos, sinh and cosh, rustymath computes a complex array through its vectorized real loops:

rm.sqrt(np.array([-4+0j, 3+4j])), rm.log(np.array([-1+0j]))

(array([0.+2.j, 2.+1.j]), array([0.+3.14159265j]))

Special functions and distributions

The special functions take SciPy’s names, such as gamma, gammaln, erf, erfinv, betainc and lambertw:

rm.gamma(np.array([0.5, 5, 10])), rm.erfinv(0.5)

(array([1.77245385e+00, 2.40000000e+01, 3.62880000e+05]),
 np.float64(0.4769362762044699))

rm.distribution holds sixteen distributions. Each constructor takes the distribution’s parameters, or uses standard ones where the distribution has them. The result has pdf, cdf, quantile and sample. The same seed gives the same draws:

n = rm.distribution.normal()
n.cdf([-1.96, 0, 1.96]), n.quantile(0.975), n.sample(3, seed=0)

(array([0.0249979, 0.5      , 0.9750021]),
 1.959963984540054,
 array([ 0.11623959, -0.78285485, -2.33463531]))

Polynomials

rm.polynomial has the functions of numpy.polynomial.polynomial, with the same names and argument order. Coefficients start from the constant term. The roots of x^3 - 6x^2 + 11x - 6 are 1, 2 and 3:

rm.polynomial.polyroots([-6, 11, -6, 1])

array([1., 2., 3.])

Number theory

rm.number_theory tests primality, factorises, finds the next or previous prime, gives Euler’s totient, and lists and counts primes, on Python integers of any size. Ctrl-C stops a long call:

nt = rm.number_theory
nt.factor(2**64 + 1), nt.prime_count(10**8), nt.next_prime(10**20)

([(274177, 1), (67280421310721, 1)], 5761455, 100000000000000000039)

Tolerant comparison

APL compares floats within a relative tolerance. Two floats are equal when their difference is at most the tolerance times the larger magnitude. With the usual tolerance, 0.1 + 0.2 equals 0.3. rm.equal, not_equal, less, less_equal, greater and greater_equal compare this way. Their tolerance ct defaults to rm.CT, 1e-14. Pass ct=0 to compare exactly:

rm.equal(0.1 + 0.2, 0.3), rm.equal(0.1 + 0.2, 0.3, ct=0)

(np.True_, np.False_)

floor, ceil, remainder, gcd and lcm take ct too. A value within tolerance of a whole number counts as that whole number:

rm.floor(np.array([2.9999999999999996, 2.5]))

array([3., 2.])

remainder takes its arguments in NumPy’s order. rm.remainder(x, y) is the Rust residue(y, x).

unique, index and isin search within the same tolerance. unique and isin take the arguments of numpy.unique and numpy.isin. index(x, y) gives where in x each item of y first matches, or the size of x where nothing does:

rm.unique([0.3, 1.0, 0.1 + 0.2]), rm.index([0.3, 1.0], 0.1 + 0.2)

(array([0.3, 1. ]), np.int64(0))

Using rustymath from Rust

Add rustymath to your Cargo.toml:

[dependencies]
rustymath = "0.1"

On x86-64, build for a recent CPU, with -C target-cpu=x86-64-v3 or -C target-cpu=native. You can set it once in .cargo/config.toml:

[target.'cfg(target_arch = "x86_64")']
rustflags = ["-C", "target-cpu=x86-64-v3"]

Rust’s default x86-64 target has no fused multiply-add and no vector instruction for floor or trunc. Without the setting, rustymath multiplies and adds separately. Some of its loops also run one item at a time.

Each function comes in two forms. The free function, such as exp, is generic over f32, f64 and half::f16. The compiler inlines it into the loop that calls it and vectorizes that loop:

use half::f16;
use rustymath::exp;

let e64 = exp(1.0f64); // 2.718281828459045
let e32 = exp(1.0f32); // 2.718282
let e16 = exp(f16::from_f32(1.0)); // 2.719

The function object, such as Exp or Pow, has a scalar form one and a slice form many. Both run code that rustymath compiles itself. Your build settings don’t change their speed. Each argument of many is one item, which every result pairs with, or a slice with one item for each result. many appends the results to a vector and returns whether every item succeeded. A NaN result from arguments that aren’t NaN counts as a failure. An object implements Unary, Binary or Ternary at each item type it takes: f16, f32 and f64, complex numbers where the function has complex values, and integers for some, such as Gcd at i64. Code that is generic over the float type states the bound it needs, such as where Exp: Unary<F, Out = F>. The free functions need no bound.

use rustymath::{Arg, Binary, Pow};

let mut squares = Vec::new();
Pow.many(Arg::Many(&[1.5, 2.0, 3.0]), Arg::One(2.0), 3, &mut squares); // squares: [2.25, 4.0, 9.0]

Use the slice forms of Sin, Cos and Tan for arrays. They reduce each item by multiples of π with a few multiply-adds, then give the rare items beyond 2^23 at f64, or 2^20 at f32, an exact reduction in integer arithmetic. The free sin takes a branch for those items. That branch stops a loop that calls it from vectorizing.

atan2(y, x) and its object Atan2 give the angle of the point (x, y), from -π to π. y comes first, as in f64::atan2.

The complex slice forms of Exp, Ln, Pow, Sin, Cos, Sinh and Cosh vectorize too. Each one splits a chunk of complex items into their real and imaginary parts and computes the results from the real slice forms. It then redoes the rare items with the scalar complex function: items with a tiny or non-finite part, and Pow’s special cases. Abs, Angle and Sqrt keep their loop over items, which runs faster than a split for their short formulas. Other complex slice forms, such as Lgamma’s, compute one item at a time.

Tolerant comparison

The tolerant module has APL’s tolerant comparison: x equals y when |x - y| is at most the tolerance times the larger of |x| and |y|. Its objects, such as Equal, Less, Floor, Residue and Gcd, each hold a Tolerance. With Tolerance::EXACT, a slice form runs a loop of plain IEEE comparisons, chosen once per call.

use rustymath::{tolerant::{Equal, Tolerance}, Arg, Binary};

let mut same = Vec::new();
Equal(Tolerance::DEFAULT).many(Arg::Many(&[0.3, 0.1 + 0.2, 0.31]), Arg::One(0.3), 3, &mut same); // same: [true, true, false]

Other modules

• number_theory: primality, factorisation, next and previous primes, Euler’s totient, and the enumeration and counting of primes, on a u64, a u128 or a BigUint. Each computes in the narrowest of those that holds the value. A function that can run for a long time also has a _with version, whose extra argument is a check that can stop it.
• polynomial: evaluation over a slice by Horner’s rule, roots from the eigenvalues of the companion matrix, building from roots, derivatives and least-squares fitting.
• reduce: sums, products, maximums and minimums over a slice, and their running versions. Float sums and products vectorize by combining the items in any order.
• distribution: sixteen distributions. The objects Pdf, Cdf and Quantile hold a distribution and evaluate it over a slice. Each distribution also samples from a seeded generator.
• random: rolls and deals that fill a slice from one generator.
• convert: int converts a whole float to an integer type. It gives None outside the type’s range, and for i64 and u32 beyond a magnitude of 2^51 - 1. float converts an integer to the nearest float. Loops that call either vectorize on every target. AVX2 and wasm lack a vector instruction between f64 and 64-bit integers. On those targets a loop that converts with as runs one item at a time.

The special functions gamma, lgamma, erf, erfc, their inverses, the incomplete gamma and beta functions and Lambert W have free functions and objects at the crate root, as the elementary functions do.

Accuracy and speed

The table gives nanoseconds per item for a loop over 65,536 inputs on an Apple M5 Max, in October 2026, beside the standard library’s version of each function. A row named after an object times its slice form. Pow.one and Root.one time the scalar forms. To print the table on your own machine, run RUSTYMATH_TIMES=1 cargo test --test speed -- --nocapture.

An f16 computes in f32 and rounds once. Special values, such as infinities, NaN and signed zeros, give IEEE’s results. The tests compare each function with a correctly rounded reference at every f16 input, at samples of f32 and f64 inputs, and at published hard cases.

Where the target has a fused multiply-add instruction, as on AArch64 and on x86-64 with FMA, the functions use it. Elsewhere, as in wasm, they multiply and add separately, because a call to a software fma would stop the loop vectorizing. FUSED says which the target uses. The modules fused and unfused hold every function again, with the choice made. A loop compiled with FMA for itself, such as an AVX2 version chosen when your program runs, calls fused. The 4-ulp bound holds either way.

At f64, pow and root compute ln |x| and its product with y as double words, through Arm Optimized Routines’ tables. The result stays within 4 ulps even where y ln |x| nears the overflow threshold. A power or root whose exact result is a float, such as 15^4 or ∛27, comes out exactly. Their scalar forms take one branch for special values, as Arm’s scalar pow does. Their slice forms compute every item the fast way, then redo only the rare items with special values. At f32 and f16, pow and root compute in f64 and round once. There the free pow and root have no branch. A loop that calls them vectorizes.

Licence

Apache-2.0. Some algorithms and constants come from SLEEF and from Arm Optimized Routines. THIRD-PARTY.md has their notices.