rx-selection 0.1.4

Project used to apply selection to ntuples used for RX measurements filtered and skimmed by post_ap project

$R_X$ selection

This project is meant to apply an offline selection to ntuples produced by post_ap and downloaded with rx_data. the selection is done with jobs sent to an HTCondor cluster.

Usage

For local tests one can use apply_selection as in:

apply_selection -d /home/acampove/Data/rx_samples/v1/post_ap -s data_24_magdown_24c2 -r q2 bdt -q central -t Hlt2RD_B0ToKpPimMuMu -p RK -i 0 -n 900

where:

usage: apply_selection [-h] -i IPART -n NPART -d IPATH -s SAMPLE -p PROJECT -q Q2BIN -t HLT2 [-c CUTVER] [-r REMOVE [REMOVE ...]]

Script used to apply selection and produce samples for Run 3

options:
  -h, --help            show this help message and exit
  -i IPART, --ipart IPART
                        Part to process
  -n NPART, --npart NPART
                        Total number of parts
  -d IPATH, --ipath IPATH
                        Path to directory with subdirectories with samples
  -s SAMPLE, --sample SAMPLE
                        Name of sample to process, e.g. data_24_magdown_24c2
  -p PROJECT, --project PROJECT
                        Name of project, e.g RK, RKstr
  -q Q2BIN, --q2bin Q2BIN
                        q2 bin, e.g. central
  -t HLT2, --hlt2 HLT2  Name of HLT2 trigger, e.g. Hlt2RD_B0ToKpPimMuMu
  -c CUTVER, --cutver CUTVER
                        Version of selection, by default, latest
  -r REMOVE [REMOVE ...], --remove REMOVE [REMOVE ...]
                        List of cuts to remove from the full selection

In the cluster, one will need a dedicated directory for the log files, this is specified by exporting the variable $JOBDIR, i.e.:

export JOBDIR=/path/to/place/here/log/files/are

Different institutes will have different mechanisms to submit jobs (i.e. HTCondor, Slurm, Torque...). Thus, different submission scripts are needed and each institute will have to write the corresponding script.

To support more sites, one should:

• Write a job_sel_xxx script.
• Add it to pyproject.toml
• Document its usage.
• Open a merge request.

For IHEP, in China, this script is job_sel_ihep and it's documented below.

For IHEP

Run:

job_sel_ihep -d /publicfs/ucas/user/campoverde/Data/RX_run3/v1/post_ap -s Bu_JpsiK_mm_eq_DPC -q central -t Hlt2RD_BuToKpMuMu_MVA -p RK -n 1000 -r q2-bdt

which will apply the selection by:

• Picking up the data found in /publicfs/ucas/user/campoverde/Data/RX_run3/v1/post_ap
• Applying the selection on the sample Bu_JpsiK_mm_eq_DPC
• For the HLT2 trigger Hlt2RD_BuToKpMuMu_MVA
• For the project RK
• Using 1000 jobs
• Skipping the q2 and bdt cuts.

The options are:

Script used to setup mamba environment and run apply_selection script

-d: Path to directory containing directory samples
-s: Name of the sample (subdirectory) to run over
-r: String with dash separated cuts to remove, e.g. q2-bdt, optional
-q: q2 bin, e.g. central
-t: HLT2 trigger, e.g Hlt2RD_B0ToKpPimEE
-p: Project, e.g. RK
-n: Number of parts into which selection is split, e.g. 100
-T: Will run a test with the first job (default) or will submit all the jobs
-Q: Queue, e.g. test (5m), short (30m), mid (10h), by default short

by default, it will run a test job.

Job list

Given the large number of samples to process a utility was created to provide the list of commands, i.e. a list like:

job_sel_ihep -T 0 -d /publicfs/ucas/user/campoverde/Data/RX_run3/v1/post_ap -s Bu_Kee_eq_btosllball05_DPC   -q central -t Hlt2RD_BuToKpEE_MVA   -p RK -n 10 -r q2-bdt
job_sel_ihep -T 0 -d /publicfs/ucas/user/campoverde/Data/RX_run3/v1/post_ap -s Bu_Kee_eq_btosllball05_DPC   -q central -t SpruceRD_BuToHpEE     -p RK -n 10 -r q2-bdt
job_sel_ihep -T 0 -d /publicfs/ucas/user/campoverde/Data/RX_run3/v1/post_ap -s Bu_Kee_eq_btosllball_DPC     -q central -t Hlt2RD_BuToKpEE_MVA   -p RK -n 10 -r q2-bdt
job_sel_ihep -T 0 -d /publicfs/ucas/user/campoverde/Data/RX_run3/v1/post_ap -s Bu_Kee_eq_btosllball_DPC     -q central -t SpruceRD_BuToHpEE     -p RK -n 10 -r q2-bdt
job_sel_ihep -T 0 -d /publicfs/ucas/user/campoverde/Data/RX_run3/v1/post_ap -s Bu_Kmumu_eq_btosllball05_DPC -q central -t Hlt2RD_BuToKpMuMu_MVA -p RK -n 10 -r q2-bdt
job_sel_ihep -T 0 -d /publicfs/ucas/user/campoverde/Data/RX_run3/v1/post_ap -s Bu_Kmumu_eq_btosllball05_DPC -q central -t SpruceRD_BuToHpMuMu   -p RK -n 20 -r q2-bdt

Run the following:

make_jobs_list

which will automatically:

• Find which samples exist and for which triggers
• Assign a number of jobs for each of these samples, based on the number of entries

Some samples, with too few entries, will be skipped altogether.