sc-dandelion 0.1.10

sc-BCR analysis tool

Hi there! I have put together a python package for analyzing single cell BCR/V(D)J data from 10x Genomics 5' solution! It streamlines the pre-processing, leveraging some tools from immcantation suite, and integrates with scanpy/anndata for single-cell BCR analysis. It also includes a couple of functions for visualization.

Citation

dandelion is now included in the the following manuscript published in Nature Medicine:

Emily Stephenson, Gary Reynolds, Rachel A Botting, Fernando J Calero-Nieto, Michael Morgan, Zewen Kelvin Tuong, Karsten Bach, Waradon Sungnak, Kaylee B Worlock, Masahiro Yoshida, Natsuhiko Kumasaka, Katarzyna Kania, Justin Engelbert, Bayanne Olabi, Jarmila Stremenova Spegarova, Nicola K Wilson, Nicole Mende, Laura Jardine, Louis CS Gardner, Issac Goh, Dave Horsfall, Jim McGrath, Simone Webb, Michael W Mather, Rik GH Lindeboom, Emma Dann, Ni Huang, Krzysztof Polanski, Elena Prigmore, Florian Gothe, Jonathan Scott, Rebecca P Payne, Kenneth F Baker, Aidan T Hanrath, Ina CD Schim van der Loeff, Andrew S Barr, Amada Sanchez-Gonzalez, Laura Bergamaschi, Federica Mescia, Josephine L Barnes, Eliz Kilich, Angus de Wilton, Anita Saigal, Aarash Saleh, Sam M Janes, Claire M Smith, Nusayhah Gopee, Caroline Wilson, Paul Coupland, Jonathan M Coxhead, Vladimir Y Kiselev, Stijn van Dongen, Jaume Bacardit, Hamish W King, Anthony J Rostron, A John Simpson, Sophie Hambleton, Elisa Laurenti, Paul A Lyons, Kerstin B Meyer, Marko Z Nikolic, Christopher JA Duncan, Ken Smith, Sarah A Teichmann, Menna R Clatworthy, John C Marioni, Berthold Gottgens, Muzlifah Haniffa. Single-cell multi-omics analysis of the immune response in COVID-19. Nature Medicine 2021.04.20; doi: https://dx.doi.org/10.1038/s41591-021-01329-2

Original preprint:

Emily Stephenson, Gary Reynolds, Rachel A Botting, Fernando J Calero-Nieto, Michael Morgan, Zewen Kelvin Tuong, Karsten Bach, Waradon Sungnak, Kaylee B Worlock, Masahiro Yoshida, Natsuhiko Kumasaka, Katarzyna Kania, Justin Engelbert, Bayanne Olabi, Jarmila Stremenova Spegarova, Nicola K Wilson, Nicole Mende, Laura Jardine, Louis CS Gardner, Issac Goh, Dave Horsfall, Jim McGrath, Simone Webb, Michael W Mather, Rik GH Lindeboom, Emma Dann, Ni Huang, Krzysztof Polanski, Elena Prigmore, Florian Gothe, Jonathan Scott, Rebecca P Payne, Kenneth F Baker, Aidan T Hanrath, Ina CD Schim van der Loeff, Andrew S Barr, Amada Sanchez-Gonzalez, Laura Bergamaschi, Federica Mescia, Josephine L Barnes, Eliz Kilich, Angus de Wilton, Anita Saigal, Aarash Saleh, Sam M Janes, Claire M Smith, Nusayhah Gopee, Caroline Wilson, Paul Coupland, Jonathan M Coxhead, Vladimir Y Kiselev, Stijn van Dongen, Jaume Bacardit, Hamish W King, Anthony J Rostron, A John Simpson, Sophie Hambleton, Elisa Laurenti, Paul A Lyons, Kerstin B Meyer, Marko Z Nikolic, Christopher JA Duncan, Ken Smith, Sarah A Teichmann, Menna R Clatworthy, John C Marioni, Berthold Gottgens, Muzlifah Haniffa. The cellular immune response to COVID-19 deciphered by single cell multi-omics across three UK centres. medRxiv 2021.01.13.21249725; doi: https://doi.org/10.1101/2021.01.13.21249725

Overview

Illustration of the Dandelion class slots

Please refer to the documentation or the notebooks here:

The raw files for the examples can be downloaded from 10X's Single Cell Immune Profiling datasets website.

Installation

Singularity container

dandelion now comes ready in the form of a singularity container:

singularity pull library://kt16/default/sc-dandelion:latest
singularity shell --writable-tmpfs -B $PWD sc-dandelion_latest.sif

This will load up a conda-environment that has all the required dependencies installed. This can be used for the preprocessing steps by navigating to the data folder and use:

singularity run -B $PWD sc-dandelion_latest.sif dandelion-preprocess

Please refer to the documentation for more information.

For more fine control, as well as for the exploration steps, please install via following the instructions below.

Manual

I would reccomend installing this in order:

# in bash/zsh terminal
# create a conda environment with specific modules
conda create --name dandelion python=3.7 # or 3.8, 3.9
conda activate dandelion

python/conda

# Install scanpy https://scanpy.readthedocs.io/en/latest/installation.html
conda install seaborn scikit-learn statsmodels numba pytables
conda install -c conda-forge python-igraph leidenalg
pip install scanpy

# skip if doing pre-processing via container
conda install -c bioconda igblast blast # if this doesn't work, download them manually (see below)

# optional: installing rpy2 (if not doing pre-processing)
# This is optional because it's only used for interaction with some of the R packages from the immcantation suite. Skip if prefer keeping it simple and run the different tools separately
# if you just want to stick with the base R
pip install "rpy2>=3.4" # or if you don't mind having conda manage R: conda install -c conda-forge "rpy2>=3.4"
# make sure not to use the same R package folder or you will end up with major issues later.

# Use pip to install the following with --no-cache-dir --upgrade if necessary
# and then lastly install this
pip install sc-dandelion
# or pip install git+https://github.com/zktuong/dandelion.git
# for the development branch, run this: pip install git+https://github.com/zktuong/dandelion.git@devel

R

If doing pre-preprocessing, dandelion requires some R packages intalled.

# in R
install.packages(c("optparse", "alakazam", "tigger", "airr", "shazam"))

or the following if using conda to manage R:

# in bash/zsh terminal
conda install -c conda-forge r-optparse r-alakazam r-tigger r-airr r-shazam

The package should now be properly installed and when starting up jupyter notebook in the virtual environment, the kernel python3 should work. Otherwise, you might need to add it manually:

# in bash/zsh terminal
python -m ipykernel install --user --name dandelion --display-name "Python (dandelion)"

Required database

Last but not least, you will need to download the database folder in this repository and place them somewhere accessible. The igblast and germline database folders were originally downloaded from immcantation docker image (4.2.0). The blast database were downloaded from IMGT and manually curated. I have uploaded a copy of the required databases in a separate repository (Last update: 01/08/2021). Once you've unpacked the folders, export the the path to the database folders as environmental variables in your ~/.bash_profile or ~/.zshenv like below. This will allow dandelion to access them easily. In the future, the databases will have to be updated accordingly.

So for example, if I unpack into ~/Documents

# in bash/zsh terminal
# set up environmental variables in ~/.bash_profile
echo 'export GERMLINE=~/Documents/dandelion/database/germlines/' >> ~/.bash_profile # or ~/.zshenv
echo 'export IGDATA=~/Documents/dandelion/database/igblast/' >> ~/.bash_profile # or ~/.zshenv
echo 'export BLASTDB=~/Documents/dandelion/database/blast/' >> ~/.bash_profile # or ~/.zshenv
source ~/.bash_profile # or ~/.zshenv

see https://github.com/zktuong/dandelion/issues/66 for a known issue if you are using a notebook via jupyterhub.

This is already available in the singularity container under /share/database/.

External softwares

While blast and igblast executables are managed through conda, you can also download igblast and blast+ manually, and store the softwares somewhere accessible. Just make sure to set the paths to them appropriately.

# in bash/zsh terminal
# unpack where relevant and export the path to the softwares, e.g. ~/Documents/
echo 'export PATH=~/Documents/software/bin:$PATH' >> ~/.bash_profile # or ~/.zshenv
source ~/.bash_profile # or ~/.zshenv

This is already available in the singularity container under /share/.

Basic requirements

Python packages

# conda
python>=3.7,<=3.8 (conda-forge)
numpy>=1.18.4 (conda-forge)
pandas>=1.0.3 (conda-forge)
distance>=0.1.3 (conda-forge)
joblib>=0.14.1 (conda-forge)
jupyter (conda-forge) # if running via a notebook
scikit-learn>=0.23.0 (conda-forge)
numba>=0.48.0 (conda-forge)
pytables>=3.6.1 (conda-forge)
seaborn>=0.10.1 (conda-forge)
leidenalg>=0.8.0 (conda-forge)
plotnine>=0.6.0 (conda-forge)

# Other executables (through conda)
blast>=2.10.1 (bioconda)
igblast>=1.15.0 (bioconda)

# pip
anndata>=0.7.1
scanpy>=1.4.6
scrublet>=0.2.1
scikit-bio>=0.5.6 
changeo>=1.0.0
presto>=0.6.0
polyleven>=0.5
networkx>=2.4
rpy2>=3.4 or # rpy2>=3.3.2,<3.3.5

R packages

alakazam_1.0.1
tigger_1.0.0
airr_1.2.0
shazam_1.0.0
ggplot2

Acknowledgements

I would like to acknowledge the contributions from Dr. Ondrej Suschanek, Dr. Benjamin Stewart, Dr. Rachel Bashford-Rogers and Prof. Menna Clatworthy, who helped with the initial conception of the project and for all discussions.

I would also like to acknowledge Dr. Jongeun Park, Dr. Cecilia-Dominguez Conde, Dr. Hamish King, Dr. Krysztof Polanksi and Dr. Peng He with whom I have had very useful discussions. I would also like to thank my wife who helped name the package, because she thought the plots looked like a dandelion =D.

Support

Support is provided on a voluntary basis, as time permits.

If there are any ideas, comments, suggestions, thing you would like to know more etc., please feel free to email me at [e-mail] or post in the issue tracker and I will get back to you.