SCAR Satellite-based Calibration for Aerial Recordings

SCAR refines the intrinsics of an aerial camera and its extrinsics relative to a GNSS/INS from the recording itself: it matches the images against georeferenced orthophotos, lifts the matches to 3D anchors with a surface model and optimizes a factor graph (GTSAM) over cameras, anchors and the calibration. No calibration target or ground control points are needed.

You provide images with timestamps, INS poses, an initial calibration and reference data:

• Germany: official orthophotos and DSMs of the federal states supported by georaffer (NRW, RLP, BW, BY, BB, ...) are downloaded on demand.
• Anywhere else: your own orthophoto and surface model as GeoTIFF/COG/VRT in any CRS (e.g. NAIP + 3DEP in the US, national mapping data, your own survey), or your own reference provider.

Frame cameras and event cameras (as reconstructed frames) are supported. The paper version is kept frozen as the preset cvprw2026 and the tag v1.0.0-cvprw2026.

Installation

SCAR needs Python 3.11+.

git clone https://github.com/hlzmnhnry/scar.git && cd scar
pixi install            # environment with GTSAM, pyproj, rasterio, georay; CPU only
pixi install -e gpu     # + PyTorch/CUDA, learned matchers (vismatch), georaffer, rerun viewer

With pip: pip install -e ".[references,matching,viewer]" (add germany for German state data). georay renders the reference views; the germany extra adds georaffer.

Quick start

A complete run on a synthetic flight with local GeoTIFF reference data, CPU only and without downloads:

pixi run python examples/custom_region_geotiff/make_demo_data.py examples/custom_region_geotiff/demo
pixi run scar run examples/custom_region_geotiff/config.yaml
pixi run python examples/custom_region_geotiff/make_demo_data.py --compare examples/custom_region_geotiff/demo

For your own flight:

scar init my_flight.yaml --template csv     # or: ltc, event
scar check my_flight.yaml --render          # time coverage, CRS, reference availability, footprint overlays
scar run my_flight.yaml --viewer            # collect anchors and optimize; live view in rerun
scar export runs/my_flight/calibration/calibration.yaml --format kalibr --output camchain.yaml

scar collect and scar optimize run the two steps separately; scar evaluate scores a calibration on anchors of an independent test sequence (reprojection error, optionally visual localization), and scar anchor-noise estimates how precise the collected anchors are by matching tracked observations against the reference data again. See examples/ for an LTC campaign; scar init --template event starts an event camera setup.

Data

• LTC dataset (Leaving the City, ECCV 2026): the full aerial recordings with INS data and calibrations, licensed under CC BY 4.0. SCAR reads the campaign folders directly (scar init my_ltc.yaml --template ltc). Images are distributed in archives (<campaign>_images/<index>.png); meta/image_shards.csv lists which frames each archive contains.

• SCAR evaluation data: the subset used in the paper (per campaign every 10th image of the training and test segments, camera.csv, ins.csv) is available here. Put a campaign folder at data/<campaign>/ and run, e.g. for 2022-10-19:

  pixi install -e gpu
  pixi run -e gpu scar run examples/ltc_quickstart/config.yaml
  

  The configuration needs the GCG2016 quasigeoid (see examples/README.md); reference tiles are downloaded automatically. For the other campaigns copy the configuration and set the campaign and the time window from paper/cvprw2026/campaigns.yaml.

If you use LTC data, please also cite the LTC paper.

Inputs

All inputs are described in one YAML file; the templates in scar/config/templates document every option.

Poses are interpolated to the image timestamps (linear position, SLERP rotation), optionally with a time offset. The conventions for frames, heights, datums and the meridian convergence are described in docs/coordinate_systems.md; please read it before using your own data.

Outputs

A run directory contains the anchors (anchors.json), the per-stage results (calibration/stages.json), the final calibration with the marginal covariance of the intrinsics (calibration/calibration.yaml) and, with --viewer, a rerun recording. scar export writes Kalibr, OpenCV and LTC formats.

Optimization presets

Reproducing the paper

paper/cvprw2026 contains the scripts, campaign definitions and initial calibrations of the CVPRW 2026 evaluation, the reproduction log and an ablation of geodetic corrections that were not part of the paper version (float32 coordinates, meridian convergence, heights, interpolation). The meridian convergence correction alone lowers the test reprojection error by 21 % on average over the six LTC campaigns. anchor_noise_ltc.py estimates the anchor noise of an LTC sequence, the empirical counterpart of the landmark prior.

Development

pixi run test           # unit, synthetic and system tests; regression tests need local LTC data
pixi run -e repro test  # bit-exact paper regression with GTSAM 4.2.0

Citation

If you use SCAR in academic work, please cite:

@InProceedings{Holzemann_2026_CVPR,
    author    = {H\"olzemann, Henry and Schleiss, Michael},
    title     = {SCAR: Satellite Imagery-Based Calibration for Aerial Recordings},
    booktitle = {Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition (CVPR) Workshops},
    month     = {June},
    year      = {2026},
    pages     = {987-996}
}

Reference data obtained through georaffer are subject to the licenses of the respective providers (e.g. NRW: dl-de/zero-2.0, RLP: dl-de/by-2.0); SCAR does not redistribute them.